Search

Abstract  We studied the applicability of two types of existing three-dimensional (3-D) basin velocity structure models of the Osaka basin, western Japan for long-period ground motion simulations. We synthesized long-period (3–20 s) ground motions in the Osaka basin during a M6.5 earthquake that occurred near the hypothetical Tonankai earthquake source area, approximately 200 km from Osaka. The simulations were performed using a 3-D finite-difference method with nonuniform staggered grids using the two basin velocity structure models. To study the ground motion characteristics inside the basin, we evaluated the wave field inside the basin using the transfer functions derived from the synthetics at the basin and a reference rock site outside the basin. The synthetic waveforms at the basin site were obtained by a convolution of the calculated transfer function and the observed waveform at the reference rock site. First, we estimated the appropriate Q values for the sediment layers. Assuming that the Q value depends on the S wave velocity V S and period T, it was set to Q = (1/3V S)(T 0/T) where V S is in m/s and the reference period T 0 is 3.0 s. Second, we compared the synthetics and the observations using waveforms and pseudovelocity response spectra, together with a comparison of the velocity structures of the two basin models. We also introduced a goodness-of-fit factor to the pseudovelocity response spectra as an objective index. The synthetics of both the models reproduced the observations reasonably well at most of the stations in the central part the basin. At some stations, however, especially where the bedrock depth varies sharply, there were noticeable discrepancies in the simulation results of the models, and the synthetics did not accurately reproduce the observation. Our results indicate that the superiority of one model over the other cannot be determined and that an improvement in the basin velocity structure models based on simulation studies is required, especially along the basin edges. We also conclude that our transfer function method can be used to examine the applicability of the basin velocity structure models for long-period ground motion simulations. [ABSTRACT FROM AUTHOR]

Abstract  We constructed a prototype of the basin and crustal structure model for the Kinki area, southwest of Japan, for the simulation of strong ground motions of hypothetical crustal and subduction earthquakes. We collected results of the deep seismic velocity profiles obtained by the reflection experiments and seismic imaging results, which were conducted in the Kinki area. The obtained profiles give underground velocity structures of the crust, from the surface to the subducting slab. We also gather the basin velocity structure information of the Osaka, Kyoto, Nara, and Ohmi basins. To examine the applicability of the constructed velocity structure model to the ground motion simulation, we simulated waveforms of an intermediate size event occurred near the source area of the hypothetical subduction earthquakes. Simulated ground motions using the basin and crustal velocity structure model are fairly well reproducing the observations at most of stations, and the constructed basin and crustal velocity structure model is applicable for the long-period ground motion simulations. [ABSTRACT FROM AUTHOR]

On 2013 April 13, an inland earthquake of Mw 5.8 occurred in Awaji Island, which forms the western boundary of the Osaka sedimentary basin in western Japan. The strong ground motion data were collected from more than 100 stations within the basin and it was found that in the Osaka Plain, the pseudo velocity response spectra at a period of around 6.5 s were significantly larger than at other stations of similar epicentral distance outside the basin. The ground motion lasted longer than 3 min in the Osaka Plain where its bedrock depth spatially varies from approximately 1 to 2 km. We modelled long-period (higher than 2 s) ground motions excited by this earthquake, using the finite difference method assuming a point source, to validate the present velocity structure model and to obtain better constraint of the attenuation factor of the sedimentary part of the basin. The effect of attenuation in the simulation was included in the form of Q(f) = Q0(f/f0), where Q0 at a reference frequency f0 was given by a function of the S-wave velocity, Q0 = αVS. We searched for appropriate Q0 values by changing α for a fixed value of f0 = 0.2 Hz. It was found that values of α from 0.2 to 0.5 fitted the observations reasonably well, but that the value of α = 0.3 performed best. Good agreement between the observed and simulated velocity waveforms was obtained for most stations within the Osaka Basin in terms of both amplitude and ground motion duration. However, underestimation of the pseudo velocity response spectra in the period range of 5-7 s was recognized in the central part of the Osaka Plain, which was caused by the inadequate modelling of later phases or wave packets in this period range observed approximately 2 min after the direct S-wave arrival.We analysed this observed later phase and concluded that it was a Love wave originating from the direction of the east coast of Awaji Island. [ABSTRACT FROM AUTHOR]