Search

Background: Guidelines recommend 3D echocardiography (3DE) to assess left ventricular ejection fraction (LVEF) on transthoracic echocardiogram (TTE) when possible, but it is unclear which factors are most strongly associated with reporting 3DE LVEF in real-world practice., Methods: We evaluated 3DE LVEF reporting by age, sex, BMI, TTE location and variation in reporting by sonographer and reader. All TTEs were performed without contrast enhancement agent at a large medical center from 9/2015 to 12/2020 using ultrasound machines capable of 3DE. We used multivariable logistic regression to assess which factors were most associated with reporting 3DE LVEF., Results: Among 35 641 TTEs included in this study, 57.4% were performed on women. 3DE LVEF was reported on 18 391 TTEs (51.6% of cohort; 50.5% for women and 52.4% for men). Portable inpatient TTEs (n = 5569) had the lowest rates of 3DE LVEF reporting (30.9%), while general outpatient TTEs (n = 15 933) had greater reporting (56.9%). Outpatient TTEs with an indication for chemotherapy (n = 3244) had the highest rates of 3DE LVEF (87.2%). The median (IQR) percentage of TTEs reporting 3D LVEF was 52.7% (43.1%-68.1%) among sonographers and 51.6% (46.5%-59.6%) among readers. Among 20082 (56.3%) TTEs with 3DE LVEF measured by sonographers, 91.6% were included by readers in the final report. After adjustment, performing sonographer in the highest reporting quartile was most strongly associated with reporting 3DE LVEF (OR 7.04, 95% CI 6.55-7.56), while an inpatient portable study had the strongest negative association for reporting (OR .38, 95% CI .35-.40)., Conclusions: Use of 3DE LVEF in real-world practice varies substantially based on performing sonographer and is low for hospitalized patients, but can be frequently used for chemotherapy. Initiatives are needed to increase sonographer 3DE acquisition in most clinical settings., (© 2024 Wiley Periodicals LLC.)

Three-dimensional echocardiography (3DE) has emerged in recent decades from a conceptual, research tool to an important, useful imaging technique that can informatively impact daily clinical practice. However, its adoption into the modern-day echo laboratory requires the acknowledgment of its value, coupled with proper leadership, education, and resources to implement and integrate its use with conventional echo techniques. 3DE integration involves important updates regarding equipment and patient selection, assimilation of 3D protocols into current clinical routine, laboratory workflow adaptation, storage, and reporting. This review will provide a practical blueprint and key points of how to integrate 3DE into today's echo laboratory, necessary resources to implement 3D workflow, logistical challenges that remain, and future directions to further improve assimilation of this relevant echo technique into the laboratory., (© 2020 Wiley Periodicals LLC.)

Introduction and Objectives: Mitral valve (MV) prolapse is highly prevalent in patients with atrial septal defect (ASD). Abnormal left ventricular geometry has been proposed as the main mechanism of MV prolapse in ASD, however, the changes in the morphology of the MV apparatus remain to be clarified. Our aim was to assess the MV geometry in patients with ASD and MV prolapse., Methods: We evaluated 99 patients (73% female, median age 40 years) with ASD who underwent a three-dimensional transesophageal echocardiogram. Three-dimensional analysis of the MV was done using dedicated automated software. Transthoracic echocardiographic parameters were assessed post ASD closure in 28 patients., Results: MV prolapse was found in 39% of patients. Although smaller left ventricular dimensions and greater interatrial shunt were found in patients with MV prolapse compared with those without prolapse, there was no difference in the subvalvular parameters. MV prolapse was associated with larger mitral anterior-posterior diameter, anterolateral-posteromedial diameter, anterior perimeter, posterior perimeter, total perimeter, and anterior leaflet area (all p < 0.05). Mitral regurgitation was more frequent in patients with MV prolapse (80 vs. 48%, p = 0.002)., Conclusions: In patients with ASD, the main mechanism of MV prolapse is the presence of an organic primary process of the MV apparatus (excessive anterior mitral leaflet tissue and mitral annular enlargement)., (© 2022 Wiley Periodicals LLC.)

Background: Detecting early impact of coronary artery bypass grafting (CABG) on left ventricular (LV) function is important because such measures may contribute to meaningful improvement in clinical outcomes. We aimed to gain knowledge about acute changes of LV performance during surgical revascularization using three-dimensional speckle tracking echocardiography (3D STE)., Methods: Thirty-five patients scheduled for CABG surgery who underwent intraoperative transesophageal echocardiography (TEE) were enrolled (mean age 68.9 ± 7.3 years). TEE was performed before and after surgery, as well as before and after grafting. 3D LV ejection fraction (LVEF), tissue motion annular displacement (TMAD) of the mitral valves, 3D global longitudinal strain (GLS), global circumferential strain (GCS), twist, and torsion were quantified. Regional longitudinal strain (LS) was calculated based on coronary perfusion territories in a 16-segment LV model., Results: Despite the absence of change in TMAD and 3D LVEF, 3D GLS (-18.6 ± 4.3% at baseline vs -16.0 ± 4.0% after surgery, P = .01) was significantly decreased, followed with no significant effect on GCS, twist, and torsion during surgery. 3D GLS correlated significantly with 3D LVEF (r between -0.34 and -0.51, P < .05 for all) under the whole operation. Territorial LS did not increase immediately after surgery., Conclusion: 3D speckle tracking imaging allows for detailed and direct evaluation of myocardial deformation, though impaired LV longitudinal function is still apparent immediately after surgery. GLS is more sensitive to an acute reduction in LV function than conventional parameters, which can be potentially useful for serial monitoring of functional recovery., (© 2021 Wiley Periodicals LLC.)

Background: P2 prolapse is a common cause of degenerative mitral regurgitation (MR); echocardiographic characteristics of non-P2 prolapse are less known. Because of the eccentric nature of degenerative MR jets, the evaluation of MR severity is challenging. The aim of this study was to test the hypotheses that (1) the percentage of severe MR determined by transthoracic echocardiography (TTE) would be lower compared with that determined by transesophageal echocardiography (TEE) in patients with non-P2 prolapse and also in a subgroup with "horizontal MR" (a horizontal jet seen on TTE that hugs the leaflets without reaching the atrial wall, particularly found in non-P2 prolapse) and (2) the directions of MR jets between TTE and real-time (RT) three-dimensional (3D) TEE would be discordant., Methods: One hundred eighteen patients with moderate to severe and severe degenerative MR defined by TEE were studied. The percentage of severe MR between TTE and TEE was compared in P2 and non-P2 prolapse groups and in horizontal and nonhorizontal MR groups. Additionally, differences in the directions of the MR jets between TTE and RT 3D TEE were assessed., Results: Eighty-six percent of patients had severe MR according to TEE. TTE underestimated severe MR in the non-P2 group (severe MR on TTE, 57%; severe MR on TEE, 85%; P < .001) but not in the P2 group (severe MR on TTE, 79%; severe MR on TEE, 91%; P = .157). Most "horizontal" MR jets were found in the non-P2 group (85%), and this subgroup showed even more underestimation of severe MR on TTE (TTE, 22%; TEE, 89%; P < .001). There was discordance in MR jet direction between two-dimensional TTE and RT 3D TEE in 41% of patients., Conclusions: Non-P2 and "horizontal" MR are significantly underestimated on TTE compared with TEE. There is substantial discordance in the direction of the MR jet between RT 3D TEE and TTE. Therefore, TEE should be considered when these subgroups of MR are observed on TTE., (Copyright © 2020 American Society of Echocardiography. Published by Elsevier Inc. All rights reserved.)

Aims: Atrial fibrillation (AF) has been associated with tricuspid annulus (TA) dilation in patients with severe functional tricuspid regurgitation (TR); however, the impact of AF is less clear in patients without severe TR. Our aim was to characterize TA remodelling in patients with AF in the absence of severe TR using 3D transoesophageal echocardiography (TOE)., Methods and Results: Ninety patients underwent clinically indicated transthoracic and TOE: non-structural (NS)-AF (n = 30); AF with left heart disease (LHD) (n = 30), and controls in sinus rhythm (n = 30). Three-dimensional TOE datasets were analysed to measure TA dimensions using novel dedicated tricuspid valve software. The NS-AF group showed biatrial dilatation and normal right ventricular (RV) size with decreased longitudinal function compared to controls, whereas the LHD-AF group showed biatrial dilatation, RV enlargement, decreased biventricular function, and higher systolic pulmonary artery pressure compared with the other groups. Indexed TA area, minimum diameter, maximum diameter, and total perimeter were significantly larger in the NS-AF group than in controls (measurements in end-diastole: 6.4 ± 1.1 vs. 5.0 ± 0.6 cm2/m2, 1.8 ± 0.3 vs. 1.6 ± 0.2 cm/m2, 2.1 ± 0.3 vs. 1.9 ± 0.2 cm/m2, and 6.6 ± 0.9 vs. 5.9 ± 0.7 cm/m2, respectively, all P < 0.05). There was no significant difference in any indexed TA parameter between AF groups. TA circularity index (ratio between minimum and maximal diameters) and TA fractional area change between end-diastole and end-systole were no different among the three groups., Conclusion: AF is associated with right atrial and tricuspid annular remodelling independent of the presence of LHD in patients with intrinsically normal tricuspid leaflets without severe TR., (Published on behalf of the European Society of Cardiology. All rights reserved. © The Author(s) 2020. For permissions, please email: journals.permissions@oup.com.)

Background: Mitral regurgitation in ischemic heart disease (IMR) is a strong predictor of outcome but until now, pathophysiology is not sufficiently understood and treatment is not satisfying. We aimed to systematically evaluate structural and functional mitral valve leaflet and annular characteristics in patients with IMR to determine the differences in geometric and dynamic changes of the MV between significant and mild IMR., Methods: Thirty-seven patients with IMR (18 mild (m)MR, 19 significant (moderate+severe) (s)MR) and 33 controls underwent TEE. 3D volumes were analyzed using 3D feature-tracking software., Results: All IMR patients showed a loss of mitral annular motility and non-planarity, whereas mitral annulus dilation and leaflet enlargement occurred in sMR only. Active-posterior-leaflet-area decreased in early systole in all three groups accompanied by an increase in active-anterior-leaflet-area in early systole in controls and mMR but only in late systole in sMR., Conclusions: In addition to a significant enlargement and loss in motility of the MV annulus, patients with significant IMR showed a spatio-temporal alteration of the mitral valve coaptation line due to a delayed increase in active-anterior-leaflet-area. This abnormality is likely to contribute to IMR severity and is worth the evaluation of becoming a parameter for clinical decision-making. Further, addressing the leaflets aiming to increase the active leaflet-area is a promising therapeutic approach for significant IMR. Additional studies with a larger sample size and post-operative assessment are warranted to further validate our findings and help understand the dynamics of the mitral valve.

Background: There is increasing evidence that using frequent invasive measures of pressure in patients with heart failure results in improved outcomes compared to traditional measures. Admittance, a measure of volume derived from preexisting defibrillation leads, is proposed as a new technique to monitor cardiac hemodynamics in patients with an implantable defibrillator., Objective: The purpose of this study was to evaluate the accuracy of a new ventricular volume sensor (VVS, CardioVol) compared with 3-dimenssional echocardiography (echo) in patients with an implantable defibrillator., Methods: Twenty-two patients referred for generator replacement had their defibrillation lead attached to VVS to determine the level of agreement to a volume measurement standard (echo). Two opposite hemodynamic challenges were sequentially applied to the heart (overdrive pacing and dobutamine administration) to determine whether real changes in hemodynamics could be reliably and repeatedly assessed with VVS. Equivalence of end-diastolic volume (EDV) and stroke volume (SV) determined by both methods was also assessed., Results: EDV and SV were compared using VVS and echo. VVS tracked expected physiologic trends. EDV was modulated -10% by overdrive pacing (14 mL). SV was modulated -13.7% during overdrive pacing (-6 mL) and increased over baseline +14.6% (+8 mL) with dobutamine. VVS and echo mean EDVs were found statistically equivalent, with margin of equivalence 13.8 mL (P <.05). Likewise, mean SVs were found statistically equivalent with margin of equivalence 15.8 mL (P <.05)., Conclusion: VVS provides an accurate method for ventricular volume assessment using chronically implanted defibrillator leads and is statistically equivalent to echo determination of mean EDV and SV., (Copyright © 2017 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.)

Transesophageal echocardiography (TEE) is routinely used to provide important qualitative and quantitative information regarding mitral regurgitation. Contemporary planning of surgical mitral valve repair, however, still relies heavily upon subjective predictions based on experience and intuition. While patient-specific mitral valve modeling holds promise, its effectiveness is limited by assumptions that must be made about constitutive material properties. In this paper, we propose and develop a semi-automated framework that combines machine learning image analysis with geometrical and biomechanical models to build a patient-specific mitral valve representation that incorporates image-derived material properties. We use our computational framework, along with 3D TEE images of the open and closed mitral valve, to estimate values for chordae rest lengths and leaflet material properties. These parameters are initialized using generic values and optimized to match the visualized deformation of mitral valve geometry between the open and closed states. Optimization is achieved by minimizing the summed Euclidean distances between the estimated and image-derived closed mitral valve geometry. The spatially varying material parameters of the mitral leaflets are estimated using an extended Kalman filter to take advantage of the temporal information available from TEE. This semi-automated and patient-specific modeling framework was tested on 15 TEE image acquisitions from 14 patients. Simulated mitral valve closures yielded average errors (measured by point-to-point Euclidean distances) of 1.86 ± 1.24 mm. The estimated material parameters suggest that the anterior leaflet is stiffer than the posterior leaflet and that these properties vary between individuals, consistent with experimental observations described in the literature., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Bicuspid aortic valve (BAV) is the most common congenital cardiac abnormality, occurring in 1% to 2% of the general population. Adults with degenerative aortic valve (AV) disease have been shown to have an elliptical shaped AV annulus. The goal of this study was to investigate the shape of the aortic annulus in children with BAV, coarctation of the aorta (CoA) with or without BAV, and normal controls with trileaflet AVs using 3-dimensional echocardiography (3DE). We reviewed echocardiograms of children with isolated BAV (n = 40), CoA (n = 26), and controls (n = 40) that included 3DE of the AV. Eccentricity index (EI) was defined as the ratio between the smaller and larger annular dimension. ΔD was defined as the difference between the larger and smaller annular dimension. Patients with BAV had an eccentric AV annulus compared with controls (BAV EI 0.85 ± 0.05 and control EI 0.96 ± 0.03; p <0.001). Subjects with CoA also had a more eccentric annulus than controls regardless of AV morphology (CoA 0.84 ± 0.06; p <0.001). EI was not associated with somatic growth parameters or gender. Among all patients with BAV, AV dysfunction was associated with fusion of the right and noncoronary (R-N) cusps (p <0.001), but there was no association between valve dysfunction and EI. ΔD was higher in both the BAV and CoA groups compared with the control group (BAV 3.4 ± 1.9 mm, CoA 2.8 ± 1.8 mm, and control 0.6 ± 0.4 mm; p <0.001 each). Although there was no significant correlation of ΔD with age in the control group during childhood, ΔD increased with age in the BAV and CoA groups. In conclusion, children with BAV and/or CoA have an elliptical shaped AV annulus by 3DE, which is independent of age, gender, or body surface area. AV annular eccentricity may lead to inaccurate measurement of AV annular size if measured by 2DE alone. Considering AV annular eccentricity when balloon sizing the annulus before valvuloplasty may help improve interventional results in some patients., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Echocardiography is one of the most valuable diagnostic tools in cardiology. Technological advances in ultrasound, computer and electronics enables three-dimensional (3-D) imaging to be a clinically viable modality which has significant impact on diagnosis, management and interventional procedures. Since the inception of 3D fully-sampled matrix transthoracic and transesophageal technology it has enabled easier acquisition, immediate on-line display, and availability of on-line analysis for the left ventricle, right ventricle and mitral valve. The use of 3D TTE has mainly focused on mitral valve disease, left and right ventricular volume and functional analysis. As structural heart disease procedures become more prevalent, 3D TEE has become a requirement for preparation of the procedure, intra-procedural guidance as well as monitoring for complications and device function. We anticipate that there will be further software development, improvement in image quality and workflow., (Copyright © 2014. Published by Elsevier Inc.)

Background: The aortic and mitral valves are anatomically linked through a fibrous continuity. The investigators hypothesized that severe aortic stenosis (AS) would alter this fibrous continuity, affecting both the mitral valve and left ventricular function, and that mitral valve function would be altered after aortic valve replacement (AVR). The aim of this study was to evaluate the impact of AS and its treatment with surgical AVR on the mitral valve., Methods: Three-dimensional transesophageal echocardiography (using a Philips iE33 system) was performed on 49 patients: 20 controls with normal valves and left ventricular function, 20 with AS and normal left ventricular function studied before and after AVR, and nine with systolic heart failure and normal valves. Custom software tracked the aortic and mitral valves in three-dimensional space, allowing automated measurements of aortic and mitral annular (MA) morphology throughout the cardiac cycle., Results: Patients with AS before AVR had reduced MA velocities. After AVR, aortic and MA areas were significantly smaller throughout the cardiac cycle compared with controls and pre-AVR values. MA displacement was reduced after AVR and in patients with systolic heart failure compared with those with AS and controls., Conclusions: Dynamic MA function is changed with AS and after AVR through alterations in the aortic-mitral fibrous continuity. The prosthetic valve ring results in reduced aortic and MA areas, which could affect blood flow in and out of the left ventricle. These changes suggest that the design of future prosthetic aortic valves should be more flexible to preserve the function of the aortic-mitral fibrous continuity., (Copyright © 2013 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Objectives: To determine the accuracy of calcium-containing rings measurements imaged by three-dimensional echocardiography (3DE), multi-slice CT (MSCT) and cardiac magnetic resonance (CMR) under ideal conditions against the true ring dimensions. To compare the accuracy of aortic annulus (AoA) measurements in ex vivo human hearts using 3DE, MSCT and CMR. To determine the accuracy of AoA measurements in an in vivo human model., Design: 3DE, MSCT and CMR imaging were performed on 30 calcium-containing rings and 28 explanted human hearts. Additionally, 15 human subjects with clinical indication for MSCT underwent 3DE. Two experts in each modality measured the images., Main Outcome Measures: Bias and intraclass correlation coefficient for accuracy of imaging measurements when compared with actual ring dimensions. Bias, intraclass correlation coefficient and variability were obtained: (1) when comparing explanted human heart AoA measurements from the two remaining imaging modalities with the most accurate one as determined from the ring measurements and (2) in in vivo human AoA measurements. Analysis was repeated on explanted heart subgroups divided by aortic valve Agatston score., Results: Against the known ring dimensions, CMR had the highest accuracy and the lowest variability. MSCT measurements had high accuracy but wider variability and 3DE had the lowest accuracy with the largest variability. When 3DE and MSCT were compared with CMR, 3DE underestimated and MSCT overestimated AoA dimensions, but inter-measurement variability of 3DE and MSCT were similar. When divided by Agatston score, both 3DE and MSCT measurements were larger and showed greater variability with increasing calcium burden. The in vivo study showed that the correlation between 3DE and MSCT measurements was high; however, 3DE measurements were smaller than those measured with MSCT., Conclusions: In the in vitro model, CMR measurements were the most accurate for assessing the actual dimensions suggesting that further investigations on its role in AoA measurement in TAVR are needed. However from the in vivo model, MSCT and 3DE are reasonable alternatives with the understanding that they can slightly overestimate and underestimate annular dimensions, respectively.

Objectives: We studied in a multicenter setting the accuracy and reproducibility of 3-dimensional echocardiography (3DE)-derived measurements of left atrial volume (LAV) using new, dedicated volumetric software, side by side with 2-dimensional echocardiography (2DE), using cardiac magnetic resonance (CMR) imaging as a reference., Background: Increased LAV is associated with adverse cardiovascular outcomes. Although LAV measurements are routinely performed using 2DE, this methodology is limited because it is view dependent and relies on geometric assumptions regarding left atrial shape. Real-time 3DE is free of these limitations and accordingly is an attractive alternative for the evaluation of LAV. However, few studies have validated 3DE-derived LAV measurements against an accepted independent reference standard, such as CMR imaging., Methods: We studied 92 patients with a wide range of LAV who underwent CMR (1.5-T) and echocardiographic imaging on the same day. Images were analyzed to obtain maximal and minimal LAV: CMR images using standard commercial tools, 2DE images using a biplane area-length technique, and 3DE images using Tomtec LA Function software. Intertechnique comparisons included linear regression and Bland-Altman analyses. Reproducibility of all 3 techniques was assessed by calculating the percentage of absolute differences in blinded repeated measurements. Kappa statistics were used to compare 2DE and 3DE classification of normal/enlarged against the CMR reference., Results: 3DE-derived LAV values showed higher correlation with CMR than 2DE measurements (r = 0.93 vs. r = 0.74 for maximal LAV; r = 0.88 vs. r = 0.82 for minimal LAV). Although 2DE underestimated maximal LAV by 31 ± 25 ml and minimal LAV by 16 ± 32 ml, 3DE resulted in a minimal bias of -1 ± 14 ml for maximal LAV and 0 ± 21 ml for minimal LAV. Interobserver and intraobserver variability of 2DE and 3DE measurements of maximal LAV were similar (7% to 12%) and approximately 2 times higher than CMR (4% to 5%). 3DE classified enlarged atria more accurately than 2DE (kappa: 0.88 vs. 0.71)., Conclusions: Compared with CMR reference, 3DE-derived LAV measurements are more accurate than 2DE-based analysis, resulting in fewer patients with undetected atrial enlargement., (Copyright © 2012 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.)

Background: The aortic valve and the mitral valve (MV) are coupled via fibrous tissue. Simultaneous dynamic analysis of the two valves' annuli has demonstrated that they have synchronous and reciprocal behavior. Accordingly, the aims of this study were to characterize mitral-aortic coupling (MAC) in three-dimensional space before and after MV repair and to identify the untoward effects of annuloplasty rings on MAC compared with normal valvular function., Methods: Real-time three-dimensional transesophageal echocardiography was performed on 28 consecutive patients with degenerative MV disease and severe mitral regurgitation before and after MV repair and in 25 age-matched control subjects. Custom software was used to semiautomatically identify the mitral and aortic annuli throughout the cardiac cycle and to measure parameters describing valvular dynamics., Results: Patients with mitral regurgitation before MV repair were characterized by altered morphology and function of the MV but preserved MAC because of the maintained ability of the mitral annulus to change size and position. MV repair together with annuloplasty ring implantation forced the mitral annulus to be smaller and less pulsatile, with decreased displacement ability compared with normal mitral annuli. Because of this alteration in MAC, the "unaffected" aortic annulus became less pulsatile and less mobile., Conclusions: This study shows unwanted and unexpected changes in aortic annular function secondary to mitral valve repair with an annuloplasty ring due to altered MAC mechanisms. These changes may alter the dynamic mechanism of the aortic root that facilitates blood ejection, so MAC should be considered and evaluated from diagnosis to treatment in MV disease., (Copyright © 2012 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Mitral effective regurgitant orifice area (EROA) using the flow convergence (FC) method is used to quantify the severity of mitral regurgitation (MR). However, it is challenging and prone to interobserver variability in complex valvular pathology. We hypothesized that real-time three-dimensional (3D) transesophageal echocardiography (RT3D TEE) derived anatomic regurgitant orifice area (AROA) can be a reasonable adjunct, irrespective of valvular geometry. Our goals were to 1) to determine the regurgitant orifice morphology and distance suitable for FC measurement using 3D computational flow dynamics and finite element analysis (FEA), and (2) to measure AROA from RT3D TEE and compare it with 2D FC derived EROA measurements. We studied 61 patients. EROA was calculated from 2D TEE images using the 2D-FC technique, and AROA was obtained from zoomed RT3DE TEE acquisitions using prototype software. 3D computational fluid dynamics by FEA were applied to 3D TEE images to determine the effects of mitral valve (MV) orifice geometry on FC pattern. 3D FEA analysis revealed that a central regurgitant orifice is suitable for FC measurements at an optimal distance from the orifice but complex MV orifice resulting in eccentric jets yielded nonaxisymmetric isovelocity contours close to the orifice where the assumptions underlying FC are problematic. EROA and AROA measurements correlated well (r = 0.81) with a nonsignificant bias. However, in patients with eccentric MR, the bias was larger than in central MR. Intermeasurement variability was higher for the 2D FC technique than for RT3DE-based measurements. With its superior reproducibility, 3D analysis of the AROA is a useful alternative to quantify MR when 2D FC measurements are challenging.

Background: Accurate segmental mitral valve (MV) analysis is essential for surgical planning. Although real-time three-dimensional (3D) transesophageal echocardiography has improved the ability to visualize the MV, accurate localization of MV pathology from 3D transesophageal echocardiographic images still remains experience dependent. Three-dimensional parametric maps of the MV obtained from these images further simplify the visualization of MV anatomy. The aims of this study were to examine whether 3D parametric maps of the MV could improve the diagnostic accuracy in localizing pathology and to determine their usefulness for readers with different levels of training., Methods: Five novice (American Society of Echocardiography [ASE] level 2), three intermediate-level (ASE level 3; <500 MV cases), and two expert (ASE level 3; >500 MV cases) readers interpreted MV segmental anatomy in 50 patients (30 with degenerative MV disease, 20 with normal MVs). All readers reviewed two-dimensional and 3D transesophageal echocardiographic and 3D parametric maps at sequential weekly sessions. The results were compared with surgical findings., Results: Expert readers were the most accurate irrespective of image type. Novice readers were the least accurate and commonly misinterpreted P2 and P3 scallops. Their accuracy was highest when interpreting 3D parametric maps (from 87% with two-dimensional transesophageal echocardiography to 92%). Intermediate readers' accuracy fell between the other two groups irrespective of image type and showed no change with the use of parametric maps., Conclusions: This is the first study to show that the interpretation of 3D parametric maps improves the accuracy of localization of MV pathology by novice readers. Therefore, parametric maps should be used routinely by less experienced readers during the assessment of degenerative MV disease., (Copyright © 2011 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Background: Real-time three-dimensional (3D) transesophageal echocardiography (TEE) was used to analyze atrial septal defect (ASD) with 4 goals: (1) to determine feasibility, (2) to analyze the accuracy of qualitative and quantitative data, (3) to assess strengths and weaknesses of the available modes of 3D TEE, and (4) to provide 3D transesophageal echocardiographic reference images., Methods: Sixty-five patients with ASDs (age, 5-64 years; weight, 20-114 kg; body surface area, 0.8-2.4 m(2)) underwent 3D TEE during catheter intervention or surgery. Three-dimensional transesophageal echocardiographic formats included live 3D, 3D zoom, and full-volume 3D modes. Qualitative and quantitative analysis of the 3D data was compared with two-dimensional echocardiographic data and intraoperative inspection., Results: Diagnostic-quality 3D TEE was successfully performed in all 65 patients. Fifty had secundum ASDs and 15 had other ASD types (seven sinus venosus, six primum, one common atrium, and one coronary sinus ASD). ASD type and location were correctly diagnosed in all patients. ASD shape and orientation were confirmed in 21 patients at surgery. Quantitative analysis of ASDs successfully demonstrated rims and changes in dimensions from systole to diastole. Live 3D mode had the highest volume rate, the best transgastric views, and the best views during device deployment but was limited by small sector size. Three-dimensional zoom mode allowed precropped live 3D images but was limited by slow volume rate. Full-volume mode had the best views of large defects and surrounding anatomy. However, it was limited by stitch artifact and required postacquisition cropping., Conclusions: Three-dimensional TEE is feasible and accurate. Each of the 3D transesophageal echocardiographic modalities has strengths and limitations., (Copyright © 2011 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Background: Aging and gender may affect left ventricular (LV) mechanics. The aim of this study was to determine the age and gender dependency of LV mechanical indices obtained from real-time three-dimensional echocardiography (RT3DE)., Methods: RT3DE was performed in 280 healthy subjects (age range, 1-88 years; 137 men). From full-volume data sets, LV endocardial and epicardial borders were semiautomatically traced using quantitative software. LV volumes and corresponding long-axis diameter were measured throughout the cardiac cycle. Sphericity index was defined as the ratio of LV volume and spherical volume, calculated as 4/3 × π × (long-axis diameter/2)(3). LV mass was calculated as (LV epicardial volume - LV endocardial volume) × 1.05. The ratio of LV mass to LV volume was also calculated., Results: The mean value of LV ejection fraction did not change with age. However, LV volumes, mass, sphericity index, and LV mass/volume ratio were altered by age: (1) sphericity index was highest in the first decade of age and then declined until the fifth decade, (2) LV mass/volume ratio significantly increased in older age, and (3) LV mass/volume ratio was significantly higher in aged women compared with age-matched men., Conclusions: Age has heterogeneous effects on LV shape and LV mass/volume ratio, potentially due to the growing process of myocardial fibers and the surrounding architecture in the younger population, as well as the aging process, with an increase in vascular stiffness and a loss of myocytes in older populations. Higher LV mass/volume ratios in older women might be a contributor to the preferential development of diastolic heart failure in this population., (Copyright © 2011 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Background: Intraoperative real-time three-dimensional transesophageal echocardiography has been shown useful in the evaluation of the mitral valve (MV) apparatus, and dedicated commercial software allows its quantitative assessment. The aims of this study were to (1) quantify the effects induced by prolapse on MV anatomy in the presence of fibroelastic deficiency (FED) or Barlow's disease (BD), (2) assess the effect of surgery on the MV apparatus, and (3) investigate the potential role of three-dimensional transesophageal echocardiography in surgical planning., Methods: Fifty-six patients (29 with FED, 27 with BD) undergoing MV repair and annuloplasty were studied immediately before and after surgery. Also, 18 age-matched patients with normal MV anatomy, undergoing coronary artery bypass, were included as a control group. Three-dimensional transesophageal echocardiographic data sets were acquired and analyzed to quantify several MV annulus and leaflet parameters using dedicated software., Results: MV prolapse and regurgitation were associated with a markedly enlarged annulus (area, 12.0 ± 3.2 cm(2) in FED and 15.4 ± 3.8 cm(2) in BD) and leaflets compared with controls (area, 7.5 ± 2.1 cm(2)), while annular height (4.5 ± 1.3 mm in controls, 4.0 ± 1.3 mm in FED, 5.3 ± 1.6 mm in BD) and the mitral aortic angle (136 ± 12° in controls, 141 ± 12° in FED, 137 ± 11° in BD) were similar. Patients with BD showed greater values than those with FED. MV repair and annuloplasty led to a significant undersizing of leaflet and annular areas (4.0 ± 1.1 cm(2) in FED, 4.9 ± 1.3 cm(2) in BD), diameters, and height (2.6 ± 1.1 mm in FED, 3.4 ± 1.4 mm in BD) compared with controls. Coaptation length remained in the normal range (30 ± 5 mm in controls, 24 ± 6 mm in FED, 28 ± 6 mm in BD). Differences between BD and FED were reduced but still present after surgery., Conclusions: Intraoperative three-dimensional transesophageal echocardiography allows quantitative evaluation of the MV apparatus in the presence of FED or BD and could be useful for immediate assessment of the surgical procedure., (Copyright © 2011 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Background: Presurgical planning of mitral valve (MV) repair in patients with Barlow disease (BD) and fibroelastic deficiency (FED) is challenging because of the inability to assess accurately the complexity of MV prolapse. We hypothesized that the etiology of degenerative MV disease (DMVD) could be objectively and accurately ascertained using parameters of MV geometry obtained by morphological analysis of real-time 3D echocardiographic (RT3DE) images., Methods and Results: Seventy-seven patients underwent transesophageal RT3DE study: 57 patients with DMVD studied intraoperatively (28 BD, 29 FED classified during surgery) and 20 patients with normal MV who were used as control subjects (NL). MVQ software (Philips) was used to measure parameters of annular dimensions and geometry and leaflet surface area, including billowing volume and height. The Student t test and multinomial logistic regression was performed to identify parameters best differentiating DMVD patients from normal as well as FED from BD. Morphological analysis in the DMVD group revealed a progressive increase in multiple parameters from NL to FED to BD, allowing for accurate diagnosis of these entities. The strongest predictors of the presence of DMVD included billowing height and volume. Three-dimensional billowing height with a cutoff value of 1.0 mm differentiated DMVD from NL without overlap, and billowing volume with a cutoff value 1.15 mL differentiated between FED and BD without overlap., Conclusions: Morphological analysis as a form of decision support in assessing MV billowing revealed significant quantifiable differences between NL, FED, and BD patients, allowing accurate classification of the etiology of MV prolapse and determination of the anticipated complexity of repair.

Background: Precise evaluation of the aortic root geometry prior to transcatheter aortic valve implantation is important for procedural success in patients with aortic stenosis (AS). To determine the potential for 3-dimensional transesophageal echocardiography (3DTEE), the aims of the present study were: (1) to assess the accuracy of 3DTEE measurements of the aortic root using multidetector computed tomography (MDCT) as a reference, and (2) to examine whether aortic root geometry differs between patients with and without AS., Methods and Results:   3DTEE and contrast-enhanced MDCT were performed in 35 patients. Multiplanar reconstruction was used to measure the left ventricular outflow tract (LVOT) and aortic annulus diameter/area, aortic valve area (AVA), and distances between the annulus and coronary artery ostium. The same 3DTEE measurements were performed in patients with (n=71) and without AS (n=80). Aortic annular and LVOT areas measured by 3DTEE were slightly but significantly smaller compared with values obtained with MDCT. Both methods revealed that the aortic annulus and LVOT have an oval shape. Aortic annular and LVOT area, AVA and the distances between the aortic annulus and the coronary ostia correlated well between the 2 modalities. Only minor differences in aortic root geometry were observed between patients with AS and those without., Conclusions: The geometry of the aortic annulus can be reliably evaluated using 3DTEE as an alternative to MDCT for the assessment of aortic root.

Background: The use of resynchronization therapy for the treatment of left ventricular (LV) systolic dysfunction in children has been expanding. Because QRS duration is not a reliable indicator of the presence or severity of dyssynchrony in every case, additional methods of quantitation of dyssynchrony are needed. The purpose of this study was threefold: (1) to define normal values for LV real-time quantitative three-dimensional echocardiographic (3DE) dyssynchrony indices (DIs), (2) to analyze the feasibility and observer variability of 3DE DIs in a wide range of children, and (3) to determine the effects of age, heart rate, body surface area, and LV end-diastolic volume on these parameters., Methods: The two specific parameters studied were the standard deviation of the time to minimum systolic volume for the number of segments analyzed and the time difference between the earliest and latest contracting segments. Both parameters were expressed as a percentage of the cardiac cycle length., Results: In 125 normal children aged 1 day to 19 years, adequate dyssynchrony studies were obtained in 102 (81.8%). The mean LV 3DE DIs expressed as the standard deviation of the time to minimum systolic volume for the number of segments analyzed were 1.16 ± 0.58 for 16 segments, 1.01 ± 0.60 for 12 segments, and 0.93 ± 0.68 for 6 segments. The mean LV 3DE DIs expressed as the time difference between the earliest and latest contracting segments were 3.80 ± 1.57 for 16 segments, 2.99 ± 1.42 for 12 segments, and 2.27 ± 1.35 for 6 segments. There were no effects of age, heart rate, body surface area, or LV end-diastolic volume on 3DE DIs. Intraobserver variability was 5.1%, and interobserver variability was 7.6%., Conclusion: Three-dimensional echocardiographic DI analysis is reproducible and feasible in most children. Three-dimensional echocardiographic DIs are not affected by growth-related parameters in children but are lower than previously reported adult values., (Copyright © 2010 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.)

Objectives: We undertook volumetric analysis of the right ventricle (RV) by real-time 3-dimensional echocardiography (RT3DE), cardiac magnetic resonance (CMR), and cardiac computed tomography (CCT) on images obtained in RV-shaped phantoms and in patients with a wide range of RV geometry., Background: Assessment of the RV by 2-dimensional (2D) echocardiography remains challenging due to its unique geometry and limitations of the current analysis techniques. RT3DE, CMR, and CCT, which can quantify RV volumes, promise to overcome the limitations of 2D echocardiography., Methods: Images were analyzed using RV Analysis software. Volumes measured in vitro were compared with the true volumes. The human protocol included 28 patients who underwent RT3DE, CMR, and CT on the same day. Volumetric analysis of CMR images was used as a reference, against which RT3DE and CCT measurements were compared using linear regression and Bland-Altman analyses. To determine the reproducibility of the volumetric analysis, repeated measurements were performed for all 3 imaging modalities in 11 patients., Results: The in vitro measurements showed that: 1) volumetric analysis of CMR images yielded the most accurate measurements; 2) CCT measurements showed slight (4%) but consistent overestimation; and 3) RT3DE measurements showed small underestimation, but considerably wider margins of error. In humans, both RT3DE and CCT measurements correlated highly with the CMR reference (r=0.79 to 0.89) and showed the same trends of underestimation and overestimation noted in vitro. All interobserver and intraobserver variability values were <14%, with those of CMR being the highest., Conclusions: Volumetric quantification of RV volume was performed on CMR, CCT, and RT3DE images. Eliminating analysis-related intermodality differences allowed fair comparisons and highlighted the unique limitations of each modality. Understanding these differences promises to aid in the functional assessment of the RV., (Copyright (c) 2010 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.)

Although 2-dimensional (2D) speckle tracking echocardiography has been shown to be useful in the assessment of regional left ventricular function, it is limited by the assumption that speckles can be tracked frame-to-frame within the imaging plane, even though the cardiac motion is 3-dimensional (3D). Our goal was to evaluate new 3D-speckle tracking echocardiographic (STE) software by (1) comparing the regional wall motion measurements against 2D-STE images, and (2) testing its ability to identify regional wall motion abnormalities. The 2D images and real-time 3D data sets (Toshiba) obtained from 32 subjects were analyzed to measure segmental radial and longitudinal displacements and rotation, as well as the radial, longitudinal, and circumferential strains. The intertechnique comparisons included regression and Bland-Altman analyses. Additionally, cardiac magnetic resonance images (Siemens 1.5 T) acquired the same day were reviewed by an expert who classified the segments as normal or abnormal. The values of each 3D-STE index were compared between the normal and abnormal segments. The 3D-STE and 2D-STE indexes did not correlate well (r = 0.16 to 0.76) and showed wide limits in intertechnique agreement (2 SD: 5 to 6 mm for displacements, 14 degrees rotation, 17% to 52% strains) despite only minimal biases, indicating that these 2 techniques are not interchangeable. In normal segments, 3D-STE showed greater displacements, reflecting the out-of-plane motion component; smaller SDs, indicating tighter normal ranges; and a gradual decrease in radial and longitudinal displacement and a reversal in rotation from the base to the apex. In the abnormal segments, all 3D-STE indexes were reduced, reaching significance for 5 of 6 indexes. In conclusion, this is the first study to evaluate the new 3D-STE technique for measurement of regional wall motion indexes. Our findings have demonstrated its superiority over 2D-STE.

Purpose of Review: Estimation of severity has become a significant predictor of outcomes and a pivotal factor in the management of mitral regurgitation. The flow convergence formula has become one of the most important quantitative methods for valve regurgitation in echocardiography. Nevertheless, it has many assumptions leading to over or underestimations. With recent development of a much improved three-dimensional volumetric imaging, there have been efforts in trying to overcome these two-dimensional limitations using three-dimensional approaches. Hence, this review is mainly focused on three-dimensional color flow and techniques of quantifying the severity of mitral regurgitation using three-dimensional echocardiography., Recent Findings: Investigators have found that imaging the proximal flow convergence region (PFCR) and measuring the vena contracta area are highly feasible. The shape of the PFCR may vary, being a hemisphere, prolate or oblate hemispheroid, or hemi-ellipsoid, based on these findings; three-dimensional formulas have a stronger correlation, less underestimation and better accuracy than the two-dimensional proximal isovelocity surface area method. Direct measurements of the effective regurgitant orifice are also feasible and serve as an alternative to hemodynamic formulas., Summary: Three-dimensional echocardiography has made major advances with the three-dimensional matrix transesophageal echo and will be a clinically viable tool as probe technology and software evolve.

Background: Real-time three-dimensional (RT3D) echocardiography is a recently developed technique that is being increasingly used in echocardiography laboratories. Over the past several years, improvements in transducer technologies have allowed development of a full matrix-array transducer that allows acquisition of pyramidal-shaped data sets. These data sets can be processed online and offline to allow accurate evaluation of cardiac structures, volumes, and mass. More recently, a transesophageal transducer with RT3D capabilities has been developed. This allows acquisition of high-quality RT3D images on transesophageal echocardiography (TEE). Percutaneous catheter-based procedures have gained growing acceptance in the cardiac procedural armamentarium. Advances in technology and technical skills allow increasingly complex procedures to be performed using a catheter-based approach, thus obviating the need for open-heart surgery., Methods: The authors used RT3D TEE to guide 72 catheter-based cardiac interventions. The procedures included the occlusion of atrial septal defects or patent foramen ovales (n=25), percutaneous mitral valve repair (e-valve clipping; n=3), mitral balloon valvuloplasty for mitral stenosis (n=10), left atrial appendage obliteration (n=11), left atrial or pulmonary vein ablation for atrial fibrillation (n=5), percutaneous closures of prosthetic valve dehiscence (n=10), percutaneous aortic valve replacement (n=6), and percutaneous closures of ventricular septal defects (n=2). In this review, the authors describe their experience with this technique, the added value over multiplanar two-dimensional TEE, and the pitfalls that were encountered., Results: The main advantages found for the use RT3D TEE during catheter-based interventions were (1) the ability to visualize the entire lengths of intracardiac catheters, including the tips of all catheters and the balloons or devices they carry, along with a clear depiction of their positions in relation to other cardiac structures, and (2) the ability to ability to demonstrate certain structures in an "en face" view, which is not offered by any other currently available real-time imaging technique, enabling appreciation of the exact nature of the lesion that is undergoing intervention., Conclusion: RT3D TEE is a powerful new imaging tool that may become the technique of choice and the standard of care for guidance of selected percutaneous catheter-based procedures.

Objectives: This study sought to establish normal values for real-time 3-dimensional echocardiography (RT3DE)-derived left ventricular (LV) dyssynchrony index (LVDI) and determine its age dependency, and to compare dyssynchrony in patients with normal LV function and patients with dilated cardiomyopathy (DCM), with and without left bundle branch block (LBBB)., Background: Cardiac resynchronization therapy is known to be ineffective in one-third of patients with heart failure, highlighting the need for alternative techniques to assess LV dyssynchrony., Methods: Datasets from RT3DE were analyzed to calculate LVDI using 16- and 17-segment models. First, 135 normal subjects were studied to establish LVDI abnormality threshold (mean + 2 SD) and to study the relationship with age. Then, 3 groups of patients (N = 16 each: DCM with and without LBBB, normal LV function with LBBB) were compared with 50 age-matched normal control subjects., Results: In normal subjects, the 16-segment model resulted in a lower LVDI abnormality threshold than the 17-segment model (4.0% vs. 4.5%). In patients with normal LV function, LVDI was significantly lower than in those with DCM, irrespective of LBBB. Although LBBB resulted in a nearly 2-fold increase in LVDI in patients with normal LV function, its effects were nonsignificant in DCM. All patients with DCM and ejection fraction <35% had abnormally high LVDI, likely as a result of low signal-to-noise ratio in low-amplitude regional volume curves hampering accurate determination of regional ejection time., Conclusions: Normal values established in this study resulted in indiscriminate diagnosis of abnormal dyssynchrony in all patients with reduced LV function. The value of RT3DE-derived LVDI in the evaluation of dyssynchrony in patients with reduced LV function needs to be critically reassessed because of the inability to accurately detect end-ejection in low-amplitude regional volume curves. Alternative indices of dyssynchrony need to be developed to address this limitation.

Aims: Intracardiac echocardiography (ICE) and two-dimensional transoesophageal echocardiography (2D TEE) are used in most centres for guiding transcatheter atrial septal defect (ASD) closure. ASDs have complex shapes that are not well characterized with 2D imaging. Real-time 3D TEE (RT3D TEE) provides en-face visualization of the ASD, allowing precise assessment of ASD dimensions. Accordingly, our aims were (i) to determine the feasibility of RT3D TEE to guide ASD closure and (ii) to compare ASD and balloon dimensions (BDs) using RT3D TEE vs. ICE and 2D TEE., Methods and Results: Thirteen patients with ostium secundum ASD underwent transcatheter ASD closure. 2D TEE, RT3D TEE, and ICE images were acquired sequentially. RT3D TEE was feasible in all patients. Comparing RT3D TEE and 2D imaging, the mean difference in long-axis dimension was +0.5 mm (P= NS for both), and -1.4 mm in short-axis (2D TEE, P < 0.05; ICE, P = 0.06). BD was greater with 3D TEE vs. ICE (+0.9 mm)., Conclusion: RT3D TEE can be used to guide transcatheter ASD closure with the advantages of lower cost than ICE, and ability to visualize en-face views of the ASD. ASD and BD as measured by RT3D TEE differ when compared with 2D imaging.

Objectives: This study sought to assess the use of real-time (RT) 3-dimensional (3D) transthoracic and transesophageal echocardiography (TEE) in the evaluation of post-operative mitral valve dehiscence., Background: Mitral valve replacement or repair may be complicated by post-operative dehiscence of the valve or annuloplasty ring resulting in clinically significant mitral regurgitation or hemolysis. Diagnosis is generally performed using 2-dimensional transthoracic echocardiography and TEE. Recently, an RT 3D TEE probe has been developed to produce high-quality real-time images., Methods: We used RT 3D TEE to evaluate mitral regurgitation after mitral valve repair or replacement as a result of mitral ring dehiscence. We studied the additional information and diagnostic utility provided by RT 3D TEE., Results: Eighteen patients were studied (8 patients after repair and 10 after replacement). Real-time 3D TEE allowed accurate evaluation of the pathology, including definition of the type of ring or prosthesis used; description of the site, size, shape, and area of the dehisced segment; and clear definition of the origin of the mitral regurgitation., Conclusions: In mitral valve dehiscence, RT 3D TEE provides additional information about the exact anatomic characteristics of the dehiscence that can be used to help in planning the most appropriate corrective intervention.

Aims: Real-time three-dimensional echocardiography (RT3DE) has been used to quantify mitral valve (MV) annular size and leaflet tenting parameters in small numbers of patients with different pathologies. We sought to establish normal values for RT3DE mitral annular, tenting, and papillary muscle parameters over a wide age range and to study their age and body surface area (BSA) dependency., Methods and Results: Transthoracic wide-angled RT3DE images of the MV were acquired in 120 subjects (52 females, 68 males, age: 37+/-20 years) with normal left ventricular (LV) function, no risk factors, and less than or equal to mild mitral regurgitation. Custom software (RealView) was used to trace the MV annulus, leaflets, and the papillary apparatus in mid-systole in 18 sequential cut planes obtained from the 3D data sets. Mitral valve annular area and height as well as tenting parameters (maximum and mean tenting height and mid-systolic tenting volume) were obtained and correlated with age and BSA. Wide inter-subject variability was noted in all parameters. Despite this variability, parameters directly affected by LV size were found to be BSA-dependent: MV annular area showed highest correlation with BSA (r=0.78), followed by inter-papillary distance (r=0.58) and postero-medial (PM) and antero-lateral (AL) papillary muscle annular distance (r=0.57 and r=0.46, respectively). Age did not correlate with either annular or tenting parameters, but showed moderate negative correlation with inter-papillary muscle angle (r= -0.52) and mild negative correlation with inter-papillary distance (r= -0.32), both normalized by BSA., Conclusions: Real-time three-dimensional echocardiography-derived MV annular, tenting, and papillary muscle parameters vary widely in normal subjects. When used clinically, normal values of parameters that are age- and/or BSA-dependent need to be adjusted accordingly.

Background: Mitral and aortic valves are known to be coupled via fibrous tissue connecting the two annuli. Previous studies evaluating this coupling have been limited to experimental animals using invasive techniques. The new matrix array transesophageal transducer provides high-resolution real-time 3D images of both valves simultaneously. We sought to develop and test a technique for quantitative assessment of mitral and aortic valve dynamics and coupling., Methods and Results: Matrix array transesophageal (Philips iE33) imaging was performed in 24 patients with normal valves who underwent clinically indicated transesophageal echocardiography. Custom software was used to detect and track the mitral and aortic annuli in 3D space throughout the cardiac cycle, allowing automated measurement of changes in mitral and aortic valve morphology. Mitral annulus surface area and aortic annulus projected area changed reciprocally over time. Mitral annulus surface area was 8.0+/-2.1 cm(2) at end-diastole and decreased to 7.7+/-2.1 cm(2) in systole, reaching its maximum (10.0+/-2.2 cm(2)) at mitral valve opening. Aortic annulus projected area was 4.1+/-1.2 cm(2) at end-diastole, then increased during isovolumic contraction reaching its maximum (4.8+/-1.3 cm(2)) in the first third of systole and its minimum (3.6+/-1.0 cm(2)) during isovolumic relaxation. The angle between the mitral and aortic annuli was maximum (136+/-13 degrees ) at end-diastole and decreased to its minimum value (129+/-11 degrees ) during systole., Conclusions: This is the first study to report quantitative 3D assessment of the mitral and aortic valve dynamics from matrix array transesophageal images and describe the mitral-aortic coupling in a beating human heart. This ability may have impact on patient evaluation for valvular surgical interventions and prosthesis design.

Background: Recently, a novel real-time 3-dimensional (3D) matrix-array transesophageal echocardiographic (3D-MTEE) probe was found to be highly effective in the evaluation of native mitral valves (MVs) and other intracardiac structures, including the interatrial septum and left atrial appendage. However, the ability to visualize prosthetic valves using this transducer has not been evaluated. Moreover, the diagnostic accuracy of this new technology has never been validated against surgical findings. This study was designed to (1) assess the quality of 3D-MTEE images of prosthetic valves and (2) determine the potential value of 3D-MTEE imaging in the preoperative assessment of valvular pathology by comparing images with surgical findings., Methods: Eighty-seven patients undergoing clinically indicated transesophageal echocardiography were studied. In 40 patients, 3D-MTEE images of prosthetic MVs, aortic valves (AVs), and tricuspid valves (TVs) were scored for the quality of visualization. For both MVs and AVs, mechanical and bioprosthetic valves, the rings and leaflets were scored individually. In 47 additional patients, intraoperative 3D-MTEE diagnoses of MV pathology obtained before initiating cardiopulmonary bypass were compared with surgical findings., Results: For the visualization of prosthetic MVs and annuloplasty rings, quality was superior compared with AV and TV prostheses. In addition, 3D-MTEE imaging had 96% agreement with surgical findings., Conclusions: Three-dimensional matrix-array transesophageal echocardiographic imaging provides superb imaging and accurate presurgical evaluation of native MV pathology and prostheses. However, the current technology is less accurate for the clinical assessment of AVs and TVs. Fast acquisition and immediate online display will make this the modality of choice for MV surgical planning and postsurgical follow-up.

Background: The aim of this study was to determine the feasibility and accuracy of a new real-time 3-dimensional (RT3D) matrix-array transesophageal echocardiographic probe for the determination of left atrial appendage (LAA) geometry., Methods: Sixty-six consecutive patients (mean age, 53 +/- 17 years) referred for 2-dimensional (2D) transesophageal echocardiography (TEE) underwent additional RT3D TEE. The feasibility of RT3D TEE for LAA geometry was studied in the first 37 patients, and 2D and RT3D transesophageal echocardiographic quantification of the LAA were compared in the subsequent 29 patients. The LAA orifice diameter and depth were measured using biplane 2D TEE, and LAA orifice area was calculated as an ellipse. LAA orifice area and depth were measured in 3D and correlated to 2D measurement and were also correlated to 64-slice cardiac computed tomography (CT) in 8 patients., Results: All 66 patients underwent RT3D matrix-array TEE without complication. In the feasibility study, the LAA was well visualized in 95%. In the quantitation study, 2D TEE underestimated LAA orifice area compared with 3D imaging (3.1 +/- 1.3 vs 4.2 +/- 2.2 cm(2); r = 0.55). LAA depth by 2D and 3D imaging were well correlated (3.7 +/- 0.7 vs 3.4 +/- 0.7 cm; r = 0.77). LAA orifice area on CT was well correlated with area on 3D TEE (r = 0.98) but not with area 2D TEE (r = 0.13). Bland-Altman analysis demonstrated that 2D TEE systematically underestimated LAA orifice area compared with 3D TEE (mean bias, -1.0 cm(2), with wide limits of agreement [-4.6 to 2.6 cm(2)]). In the 8 patients who underwent both 3D TEE and CT, the mean bias was 0.15 cm(2), with narrow limits of agreement (-0.50 to 0.20 cm(2))., Conclusions: RT3D TEE for the visualization and quantitative analysis of LAA orifice area is feasible and correlates well with 64-slice cardiac CT.

Background: The recent development of 3-dimensional (3D) surface detection algorithm of the endocardial and epicardial surfaces from real-time 3D echocardiographic (RT3DE) datasets allows direct semiautomated quantification of left ventricular mass (LVM). Our aims were to (1) evaluate the accuracy of RT3DE measurements of LVM using this algorithm against cardiac magnetic resonance (CMR) reference and (2) compare RT3DE LVM with conventional M-mode, 2-dimensional (2D), and RT3DE-guided biplane measurements., Methods: A total of 205 patients were studied in 2 protocols: (1) RT3DE and CMR imaging was performed on the same day in 55 subjects; (2) in an additional 150 subjects, RT3DE, 2D, and M-mode images were acquired. In both protocols, RT3DE endocardial and epicardial surfaces were semiautomatically identified at end diastole (QLab, Philips Medical Systems, Andover, MA) to calculate LVM. CMR, 2D, and M-mode-derived LVM were obtained using standard techniques., Results: A significant correlation (r = 0.95) was noted between RT3DE and CMR-derived LVM with a small bias of -2 g. M-mode-derived LVM measurements (175 +/- 64 g) were significantly larger than RT3DE LVM (123 +/- 39 g, bias: 52 g) with moderate correlation (r = 0.76). No significant differences in LVM were noted between 2D (125 +/- 42 g) and RT3DE values (bias: 1.2 g) with good correlation (r = 0.91, P < .001). However, the best correlation was noted between RT3DE and RT3DE-guided biplane LVM values (r = 0.95, P < .001, bias: -4.6 g). Intraobserver, interobserver variability, and test-retest variability of the RT3DE measurements were 9%, 12%, and 6%, respectively., Conclusion: RT3DE imaging using the 3D surface detection algorithm allows accurate and reproducible measurements of LVM. RT3DE-guided biplane technique can be used as an accurate time-saving alternative in clinical practice.

Objectives: Our study goals were to evaluate the 3-dimensional matrix array transesophageal echocardiographic (3D-MTEE) probe by assessing the image quality of native valves and other intracardiac structures., Background: Because 3-dimensional transesophageal echocardiography with gated rotational acquisition is not used routinely as the result of artifacts, lengthy acquisition, and processing, a 3D-MTEE probe was developed (Philips Medical Systems, Andover, Massachusetts)., Methods: In 211 patients, 3D-MTEE zoom images of the mitral valve (MV), aortic valve, tricuspid valve, interatrial septum, and left atrial appendage were obtained, followed by a left ventricular wide-angled acquisition. Images were reviewed and graded off-line (Xcelera with QLAB software, Philips Medical Systems)., Results: Excellent visualization of the MV (85% to 91% for all scallops of both MV leaflets), interatrial septum (84%), left atrial appendage (86%), and left ventricle (77%) was observed. Native aortic and tricuspid valves were optimally visualized only in 18% and 11% of patients, respectively., Conclusions: The use of 3D-MTEE imaging, which is feasible in most patients, provides superb imaging of native MVs, which makes this modality an excellent choice for MV surgical planning and guidance of percutaneous interventions. Optimal aortic and tricuspid valve imaging will depend on further technological developments. Fast acquisition and immediate online display will facilitate wider acceptance and routine use in clinical practice.

Objectives: We sought to study: 1) the accuracy and reproducibility of real-time 3-dimensional echocardiographic (RT3DE) analysis of left ventricular (LV) volumes in a multicenter setting, 2) interinstitutional differences in relationship with the investigators' specific experience, and 3) potential sources of volume underestimation., Background: Reproducibility and accuracy of RT3DE evaluation of LV volumes has not been validated in multicenter studies, and LV volumes have been reported to be underestimated compared to cardiac magnetic resonance (CMR) standard., Methods: A total of 92 patients with a wide range of ejection fractions underwent CMR and RT3DE imaging at 4 different institutions. Images were analyzed to obtain LV end-systolic volume (ESV) and end-diastolic volume (EDV). Reproducibility was assessed using repeated analyses. The investigation of potential sources of error included: phantom imaging, intermodality analysis-related differences, and differences in LV boundary identification, such as inclusion of endocardial trabeculae and mitral valve plane in the LV volume., Results: The RT3DE-derived LV volumes correlated highly with CMR values (EDV: r = 0.91; ESV: r = 0.93), but were 26% and 29% lower consistently across institutions, with the magnitude of the bias being inversely related to the level of experience. The RT3DE measurements were less reproducible (4% to 13%) than CMR measurements (4% to 7%). Minimal changes in endocardial surface position (1 mm) resulted in significant differences in measured volumes (11%). Exclusion of trabeculae and mitral valve plane from the CMR reference eliminated the intermodality bias., Conclusions: The RT3DE-derived LV volumes are underestimated in most patients because RT3DE imaging cannot differentiate between the myocardium and trabeculae. To minimize this difference, tracing the endocardium to include trabeculae in the LV cavity is recommended. With the understanding of these intermodality differences, RT3DE quantification of LV volume is a reliable tool that provides clinically useful information.

The introduction of three-dimensional (3D) imaging and its evolution from slow and labor-intense off-line reconstruction to real-time volumetric imaging is one of the most significant developments in ultrasound imaging of the heart of the past decade. This imaging modality currently provides valuable clinical information that empowers echocardiography with new levels of confidence in diagnosing heart disease. One major advantage of seeing the additional dimension is the improvement in the accuracy of the evaluation of cardiac chamber volumes by eliminating geometric modeling and the errors caused by foreshortened views. Another benefit of 3D imaging is the realistic views of cardiac valves capable of demonstrating numerous pathologies in a unique, noninvasive manner. This article reviews the major technological developments in 3D echocardiography and some of the recent literature that has provided the scientific basis for its clinical use.

Mitral regurgitation (MR) in dilated cardiomyopathy (DCM-MR) and MR in ischemic cardiomyopathy (ISC-MR) usually occurs as a result of mitral annulus (MA) dilatation and papillary muscle displacement secondary to global left ventricle remodelling. We propose a method to determine MA area and motion throughout the cardiac cycle and to define papillary muscle position in 3-dimensional space using real-time 3-dimensional echocardiography. Real-time 3-dimensional echocardiography was performed in 24 healthy individuals, and in 30 patients with DCM-MR (n = 15) or ISC-MR (n = 15). Significant intergroup differences were noted in MA surface area (control: 6.4 +/- 1.7 cm(2); DCM-MR: 11.1 +/- 2.6 cm(2); ISC-MR: 9.0 +/- 2.0 cm(2)) and in peak MA motion (control: 8.7 +/- 3.0 mm; DCM-MR: 3.4 +/- 1.7 mm; ISC-MR: 4.9 +/- 1.5 mm). In patients with DCM-MR, papillary muscle symmetry was preserved, whereas in patients with ISC-MR, papillary tethering lengths were unequal as a result of wall-motion abnormalities. Our methodology for dynamic volumetric measurements of the mitral apparatus allows better understanding of MR mechanisms.

We studied the usefulness and reproducibility of real-time 3-dimensional (3D) echocardiography (RT3DE) for evaluating left ventricular (LV) dyssynchrony, and compared its results with Doppler tissue image (DTI) indices. Full-volume RT3DE data sets and 2-dimensional DTI from apical window were obtained in 122 participants. Using fast 3D border detection software, time to minimum systolic volume (Tmsv) was semiautomatically calculated in each region from a 17-segment model. Several dyssynchrony indices were then calculated: Tmsv-16SD, the SD of Tmsv in 16 of 17 segments, excluding the apical cap; Tmsv-12SD, the SD of Tmsv of 6 basal and 6 middle segments; and Tmsv-6SD, the SD of Tmsv of 6 basal segments. These dyssynchrony indices of RT3DE were then compared with two dyssynchrony indices measured by DTI: time to peak systolic velocity (TTPV)-12SD, the SD of time to peak systolic velocity of 12 LV segments; and time to cross over point of temporal axis (TTCO)-12SD, the SD of time to crossover point of temporal axis. RT3DE data was quantitatively analyzed in 117 of 122 patients. Tmsv-16SD (35 +/- 34 milliseconds) was significantly longer compared with Tmsv-12SD (27 +/- 30 milliseconds, P < .001) or Tmsv-6SD (23 +/- 28 milliseconds, P < .001). Tmsv-16SD increased significantly with the severity of LV systolic dysfunction. Fair correlation was noted among TTPV-12SD, TTCO-12SD, and Tmsv-16SD (r = 0.71, r = 0.73) and between Tmsv-16SD and LV ejection fraction (r = 0.80). Concordance rate between TTPV-12SD and Tmsv-16SD for detecting LV dyssynchrony was 79%. The corresponding value between TTCO-12SD and Tmsv-16SD was 80%. In conclusion, Tmsv-16SD correlated well with DTI-derived LV dyssynchrony indices. In addition to LV remodeling, fast border detection RT3DE provides useful parameters for evaluating LV dyssynchrony.

Three-dimensional (3D) color Doppler echocardiography is a relatively new noninvasive tool that displays and quantitates regurgitant flow and also enables estimation of cardiac output, stroke volume, pulmonary outflow, and shunt calculations. This article provides an overview of the current methodology of 3D color flow, and its advantages and limitations.

Background: The availability of accurate noninvasive measurements of cardiac output (CO) would be useful in assessing disease severity and the effects of therapeutic interventions in many different clinical settings. Current noninvasive methods are limited by their dependence on geometric assumptions. We tested the feasibility of a new technique for CO measurements based on 3-dimensional color Doppler echocardiographic (3D-CD) imaging., Objective: We sought to compare the accuracy of CO determination in human beings as measured by 3D-CD and conventional 2-dimensional echocardiography (2DE) using thermodilution as the gold standard for comparison., Methods: Simultaneous 3D-CD, 2DE, and thermodilution data were acquired in 47 patients postcardiac transplantation with good acoustic windows who required routine hemodynamic evaluation with a pulmonary artery catheter. Data were stored on compact disc and analyzed offline using custom software. Echocardiographic data were compared against thermodilution using linear regression and Bland-Altman analysis., Results: Correlation coefficients for 3D-CD and 2DE of the left ventricular outflow tract were r = 0.94 and r = 0.78, respectively. Correlation coefficients for 3D-CD and 2DE of the mitral valve were r = 0.93 and r = 0.75, respectively. Compared with 2DE, 3D-CD demonstrated a smaller bias and narrower limits of agreement in the left ventricular outflow tract (-1.84 +/- 16.8 vs -8.6 +/- 36.2 mL) and mitral valve inflow (-0.2 +/- 15.6 vs 10.0 +/- 26 mL)., Conclusion: The 3D-CD determination of CO is feasible and accurate. Compared with previous noninvasive modalities, 3D-CD has the advantages of independence of geometric assumptions and ease of image acquisition and analysis.