Search

Eddy Current Testing (ECT) plays a key role in detecting cracks and defects in conductors. The present study examines for the first time how the subregion method as an effective mathematical and computational technique can be admixed with Finite Element Method (FEM) to study multiple defects parameters for ECT issues. Separating a defect region from the entire domain in any computational technique will save both time and storage space. Examples of different types of defects are presented in this article. A tangible result of processing time reduction by 90% has been achieved which has led us to consider the subregion FEM method as an effective method in solving different Nondestructive Evaluation (NDE) problems. An agreement between our results and others using classical FEM has been achieved which could lead to using this technique in online and field testing problems. The presented subregion FEM algorithm was verified experimentally with good agreement by testing Aluminum (T6061-T6) samples with defects. A Tunneling Magnetoresistive (TMR) sensor was used to measure the component of the magnetic field from normal to the sample top surface. A major component of minimizing processing time was achieved, which could lead to using this technique in online and field testing problems. [ABSTRACT FROM AUTHOR]

This paper presents an eddy current (EC) probe with orthogonal excitation coils that can change the exciting current direction electrically and tunnel magnetoresistive (TMR) sensor for inspection of stacked CFRP. As CFRP is electrically anisotropic, eddy current excited along the fiber direction is stronger than in other directions. A high sensitivity TMR sensor located at the center of the two orthogonal coils measures the z component of induced magnetic field (Bz) which constitutes the probe signal. The output of the sensor is 0 if the induced currents are symmetric about the sensor. Signals of defects in different orientations depend on the direction of the exciting current. The operation of the probe is validated using a finite element model. A prototype was built and experimental results from CFRP sample with defects in different orientations are presented and analyzed. [ABSTRACT FROM AUTHOR]

A computational technique is presented in this paper which improves finite element method (FEM) in solving inverse problems. Subregion method is used to select and isolate the area of interest where design parameters for defect shape are updated. An elastic mesh generator is developed in this paper to generate optimal meshes in the selected area to save connectivity matrix until having the most accurate design parameters. Using subregion FEM in solving inverse problems will help in minimizing processing time and memory usage in addition of reducing solution complexity. A 2-D eddy current testing (ECT) problem of detecting and characterizing the location and shape of a defect by separating the defect from entire domain is used to validate the presented subregion FEM algorithm. The elastic mesh generator is investigated to update the preselected design parameters of the defect in each iteration. This meshing technique adds the specialty of using subregion method in inverse problems where elements and nodes numberings are saved inside and outside the defect region. Both the genetic algorithm and simulated annealing optimization techniques are developed to get the accurate defect parameters. The presented subregion FEM results have been verified computationally using conventional FEM. Excellent results of signals agreement and processing time minimization with a factor of 90% with an accuracy of 98% have been achieved. In addition, the presented subregion FEM algorithm has been verified experimentally using aluminum (T6061-T6) and mild steel plate (0.15%–0.30% carbon and Fe) samples. This experiment is carried using an elongated excitation coil in a fixed position mounted on the top of the sample and tunneling magnetoresistive sensor to measure magnetic field. The measured magnetic fields were used as input to the inverse subregion FEM solver and the machined artificial defects were characterized with excellent accuracy. [ABSTRACT FROM AUTHOR]