Search

One of the major ways of delivering renewable energy generation from large-scale energy bases in northeast, northwest, and northern China, is to bundle the power from wind-photovoltaic-thermal units and then transmit it by alternating current/direct current (AC/DC) systems. The interactions among wind power units, photovoltaic (PV) power units, and high voltage direct current (HVDC) systems make the stability of the interconnected power system more complicated. In this paper, a framework model of wind-PV-thermal-bundled power transmitted by AC/DC systems is constructed based on the mathematical models of thermal power units, wind power units, PV power units, and HVDC transmission systems. Considering the fluctuations of wind power outputs and PV power outputs, a small-signal stability model of an interconnected power system with wind-PV-thermal-bundled power transmitted by AC/DC systems is established based on an existing stability theorem. The interactions among various forms of energy and their impacts on wind-PV-thermal-bundled power transmitted by AC/DC systems are studied through theoretical analysis and dynamic simulation. A sample interconnected power system is used to demonstrate the proposed method. It is shown by simulation results that the wind-PV-thermal-bundled power transmission distance; the electrical distance among wind power units, PV power units, and thermal power units; the grid-connected capacities of wind, PV, and thermal power units; and the power loading ratios of AC lines over DC lines all have various degrees of impacts on the stability of the interconnected power system. [ABSTRACT FROM AUTHOR]

The ever-increasing penetration of wind power integration into a power system can produce significant impacts on the operation of an interconnected power system. As the major energy conversion technology for large wind turbines, the doubly fed induction generator (DFIG) will play an important role in future power systems. Hence, the impacts of the DFIG on the low-frequency oscillations of interconnected power systems have become an important issue with extensive concerns. This paper examines the impacts of several factors, including the DFIG transmission distance, tie-line power of the interconnected system, DFIG capacity, with/without a power system stabilizer (PSS), on the low frequency oscillation characteristic of an interconnected power system using both eigenvalue analysis and dynamic simulations. To investigate the effects of these factors on the interarea oscillation mode, case studies are carried out on two two-area interconnected power systems, and some conclusions are obtained. [ABSTRACT FROM AUTHOR]

It has become more and more demanding to investigate the impacts of wind farms on power system operation as ever-increasing penetration levels of wind power have the potential to bring about a series of dynamic stability problems for power systems. This paper undertakes such an investigation through investigating the small signal and transient stabilities of power systems that are separately integrated with three types of wind turbine generators (WTGs), namely the squirrel cage induction generator (SCIG), the doubly fed induction generator (DFIG), and the permanent magnet generator (PMG). To examine the effects of these WTGs on a power system with regard to its stability under different operating conditions, a selected synchronous generator (SG) of the well-known Western Electricity Coordinating Council (WECC three-unit nine-bus system and an eight-unit 24-bus system is replaced in turn by each type of WTG with the same capacity. The performances of the power system in response to the disturbances are then systematically compared. Specifically, the following comparisons are undertaken: (1) performances of the power system before and after the integration of the WTGs; and (2) performances of the power system and the associated consequences when the SCIG, DFIG, or PMG are separately connected to the system. These stability case studies utilize both eigenvalue analysis and dynamic time-domain simulation methods. [ABSTRACT FROM AUTHOR]

Abstract: To ensure the small-signal stability of a power system, power system stabilizers (PSSs) are extensively applied for damping low frequency power oscillations through modulating the excitation supplied to synchronous machines, and increasing interest has been focused on developing different PSS schemes to tackle the threat of damping oscillations to power system stability. This paper examines four different PSS models and investigates their performances on damping power system dynamics using both small-signal eigenvalue analysis and large-signal dynamic simulations. The four kinds of PSSs examined include the Conventional PSS (CPSS), Single Neuron based PSS (SNPSS), Adaptive PSS (APSS) and Multi-band PSS (MBPSS). A steep descent parameter optimization algorithm is employed to seek the optimal PSS design parameters. To evaluate the effects of these PSSs on improving power system dynamic behaviors, case studies are carried out on an 8-unit 24-bus power system through both small-signal eigenvalue analysis and large-signal time-domain simulations. [Copyright &y& Elsevier]

The well-developed unified power flow controller (UPFC) has demonstrated its capability in providing voltage support and improving power system stability. The objective of this paper is to demonstrate the capability of the UPFC in mitigating oscillations in a wind farm integrated power system by employing eigenvalue analysis and dynamic time-domain simulation approaches. For this purpose, a power oscillation damping controller (PODC) of the UPFC is designed for damping oscillations caused by disturbances in a given interconnected power system, including the change in tie-line power, the changes of wind power outputs, and others. Simulations are carried out for two sample power systems, i.e., a four-machine system and an eight-machine system, for demonstration. Numerous eigenvalue analysis and dynamic time-domain simulation results confirm that the UPFC equipped with the designed PODC can effectively suppress oscillations of power systems under various disturbance scenarios. [ABSTRACT FROM AUTHOR]