Search

Abstract: Three-leg inverters for photovoltaic systems have many disadvantages, especially when the load is unbalanced. These disadvantages are, for example, small utilization of the DC link voltage, the dependency of the modulation factor of the load current and the superposition of a DC component with the output AC voltage. A solution for these problems is the 4-leg inverter. Most papers dealing with 4-leg inverters suggest classic controllers, such as PI controller, for the system. However, the transient performance of the closed-loop system does not become acceptable. On the other hand, adaptive control of 4-leg inverters has not yet been discussed in the literature. This paper proposes pole-placement control strategy, via state feedback, for 4-leg voltage-source inverters to adjust the transient performance of the closed-loop system. In addition, a STR (self-tuner regulator) is introduced to guarantee the adaptive performance of the controller in the presence of time-variant RL loads. Simulation results validate the theoretical results and proposed control strategy. [Copyright &y& Elsevier]

Abstract: Three leg inverters for photovoltaic systems have a lot of disadvantages, especially when the load is unbalanced. These disadvantages are for example, small utilization of the DC link voltage, the dependency of the modulation factor of the load current and the superposition of a DC component with the output AC voltage. A solution for these problems is the 4-leg inverter. Most papers dealing with 4-leg inverters ignore the effect of digital delays in control loop and suggest classic controllers, such as PI controller. However, the transient performance of the system does not become adjustable by applying classic control techniques. Additionally, adaptive control techniques have not yet been discussed for 4-leg inverters. This paper proposes the pole-placement control strategy via state feedback with integral state, which is a modern control technique, to control the system. Consequently, resulted system becomes highly robust. In addition, it suggests a Self-Tuner Regulator to guarantee the adaptive performance of the final system. Moreover, it proposes a novel model, considering digital delays, for 4-leg inverters. Simulation results show that transient performance of the system becomes accurately adjustable and the 4-leg inverter generates balanced voltage, with sinusoidal waveform, in spite of the presence of RL time variant loads. [ABSTRACT FROM AUTHOR]

Abstract: Three leg inverters for photovoltaic systems have a lot of disadvantages, especially when the load is unbalanced. These disadvantages are for example, small utilization of the DC link voltage, the dependency of the modulation factor of the load current and the superposition of a DC component with the output AC voltage. A solution for these problems is the four-leg inverter. Most papers dealing with 4-leg inverters ignore the effect of digital delays in control loop and suggest classic controllers, such as PI controller. However, the transient performance of the closed-loop system does not become, accurately, adjustable and acceptable, in most cases. This paper proposes a novel model, considering digital delays, for 4-leg inverters. Then, it applies pole-placement control strategy, via state feedback, to adjust the transient performance of the closed-loop system to a desired second-order system. Simulation results validate theoretical results and proposed control strategy. [ABSTRACT FROM AUTHOR]

Abstract: This paper describes an average model of indirect matrix converter (IMC) with an output LC filter in stationary and rotating reference frames. The developed model is non-linear and should be linearized in order to design linear controllers. Transient performance of the IMC is compared with that of conventional inverter in classic AC/DC/AC system. In order to make the IMC applicable for power conditioner applications a synchronous controller is designed. A power conditioner acts in one or more ways to deliver a voltage of the proper level and characteristics to enable load equipment to function properly. In order to afford the power conditioner requirements the controller has two segments. One segment controls the IMC with balanced input supply voltage and the other controls the system with unbalanced input supply voltage. The system can provide balanced output voltages with slight distortion of line side currents. Theory analyses, the model validation and simulation results are presented to verify the effectiveness of this control method. [Copyright &y& Elsevier]

This paper describes an average model of Indirect Matrix Converter (IMC) with an output LC filter in stationary and rotating reference frames. The developed model is non-linear and should be linearized in order to design linear controllers. In order to make the IMC applicable for power conditioner applications a synchronous controller based on pole placement technique is designed. A power conditioner acts in one or more ways to deliver a voltage of the proper level and characteristics to enable load equipment to function properly. in order to afford the power conditioner requirements the controller has two segments. One segment controls the IMC with balanced input supply voltage and the other controls the system with unbalanced input supply voltage. The system can provide balanced output voltages with slight distortion of line side currents. Theory analyses, the model validation and simulation results are presented to verify the effectiveness of this control method. [ABSTRACT FROM AUTHOR]