Search

A very simple geometric structure whose branches can be filled by inductors, capacitors, diodes, short-circuits, or open-circuits is proposed. It serves for generating large dc gain-purposed switching cells by making different choices of the type of component on each branch. The switching cells are integrated in basic converters. It is shown that almost all the high dc gain nonisolated converters based on switched-capacitor-inductor cells proposed in the last years, regardless of their complexity, can be derived through this method. From the same geometric structure, new high dc gain boosting converters can be derived in a systematic manner. The available and the new converters in each class as defined by the number of reactive components are compared in terms of their performance: dc gain, semiconductor elements count, voltage and current stress on transistors and diodes, character of the input current, easiness of the transistor driving, and easiness of the control as determined by common/uncommon line-load ground, power stage efficiency. This comparison allows us to choose the optimal solution for each specific application in conjunction with the green sources of energy, multisource microgrids, electric vehicles, data and communications systems, and so on. The geometric structure is generalized in different ways, allowing for the development of ultrahigh dc gain converters. One of the proposed generalized ultrahigh dc gain converters is fully analyzed and built in the laboratory, with the experimental results verifying the theoretical analysis. [ABSTRACT FROM AUTHOR]

The switched-capacitor (SC) converters are ideal switching-mode power supplies for consumer portable electronic devices due to their nature of being light weight, small size, and high-power density. However, they suffer from a discontinuous input-current waveform with large di/dt, which leads to significant electromagnetic interference emission. This paper proposes a configuration of SC converters connected in parallel, with their inputs and outputs interleaved and adaptively controlled. The interleaving operation is performed by using an original type of control in which both the capacitors’ charging time TON and switching frequency are adjusted to get the line and load regulation. It is shown that, for a given range of variation of the supply voltage and load, there always exists a solution [TON, TS] that assures both output-voltage regulation and perfect interleaving. Experimental results are provided to validate the feasibility of the proposed scheme. Precise interleaving, and good line and load regulation are maintained for all the designated range, including the transient periods. [ABSTRACT FROM PUBLISHER]

A new soft-switched, current-driven full-bridge converter is presented. The structure utilizes a simple snubber formed by two unidirectional switches and a capacitor to realize soft-switching operation over a wide line and load range. All primary-side switches are operated with zero-current switching (ZCS) and the snubber switches are operated with zero-voltage switching. The energy used for soft-switching is self-adaptable. For a given input current, the snubber capacitor is charged to the minimum required energy for ZCS of the switches. Thus, less resonant energy is used and the conduction loss can be kept minimal. The cyclical switching operation and control of the converter will be discussed. By compromising the voltage stress on the switches and loss of duty cycle (i.e., the regulation range), an optimized design procedure of the circuit elements is derived. The input voltage range and load variation that ensure both output voltage regulation and soft switching are determined. By studying the small-signal characteristics of the entire system, a current-controlled feedback control circuit has been implemented with a DSP. The experimental results measured on a 5-kW, 530-V/15-kV prototype confirms the advantages of the proposed converter. [ABSTRACT FROM AUTHOR]

A new circuit is proposed for a steep step-up of the line voltage. It integrates a switched-capacitor (SC) circuit within a boost converter. An SC circuit can achieve any voltage ratio, allowing for a boost of the input voltage to high values. It is unregulated to allow for a very high efficiency. The boost stage has a regulation purpose. It can operate at a relatively low duty cycle, thus avoiding diode-reverse recovery problems. The new circuit is not a cascade interconnection of the two power stages; their operation is integrated. The simplicity and robustness of the solution, the possibility of getting higher voltage ratios than cascading boost converters, without using transformers with all their problems, and the good overall efficiency are the benefits of the proposed converter. [ABSTRACT FROM AUTHOR]

Presents a generalized circuit structure of bi-directional switched-capacitor dc/dc converters that feature voltage step-down, voltage step-up, and bi-directional power flow. Derivation of two structures of single-capacitor bi-directional converter cells; Control scheme applied in the capacitor-charging phase; Formulation of a converter string by cascading a number of converter cells.

Presents a technique for calculating the alternating current line-to-output and control-to-output transfer characteristics of direct current (dc)/dc converters. Algorithm description; Illustrative examples; Conclusion.

Proposes a buck converter operating at constant switching frequency, whose active switches and recovery diode commutate at zero-voltage-switching (ZVS), with zero capacitive turn-on losses. Use of parasitic capacitances of the switches; When the resonant stage takes place.