Search

In a resonant dc/dc converter, the major part of the volume is filled by passive components. Moreover, all these components have to support all the power flow. On the one hand, this leads to losses in these components and their connections and on the other hand to an important cost of the converter. Concept of integrated passive component, called inductor-capacitor-transformer (L-C-T), is now well known [1], [3], [4], [6], [8] and this paper will present a new prototype which permits to integrate in an unique part an inductor, a capacitor and a transformer. Because it uses only one core with three windings, this component will reduce the volume of the passive part of the converter. By reducing the number of connections it will, also, have a positive effect on losses. After a presentation of L-C-T components, this paper describes a design of this device, using new windings disposition. The proposed structure permits to adjust separately L and C values. Then, to validate the approach, a characterization is carried out, leading to a new model, including dielectric, iron and copper losses. [ABSTRACT FROM AUTHOR]

As a consequence of the increase of power needs in low-voltage applications, wiring several windings in parallel to sustain large currents has become common. This choice may have a serious impact on the transformer reliability. In practice, due to additional currents that we call "circulation currents," highly localized extra losses occur. Although hot points resulting from these currents can destroy the component, the related losses are generally not taken into account by analytical approaches. In planar transformers, windings are made of printed circuit board layers, and circulation currents lead to severe unbalance of current sharing between parallel layers. This paper presents an analytical method enabling the evaluation of the currents in every layer using only a circuit simulation software such as Pspice or PSIM. For a designer, this method is very intuitive and fast compared with the use of finite element method simulations. Several extensions of the modeling method used here are also presented. [ABSTRACT FROM AUTHOR]