Search

Wireless power transfer (WPT) working at megahertz (MHz) is now being widely considered a promising candidate for the midrange transfer of a medium amount of power. Efforts have been made to build high-efficiency MHz WPT systems via both component- and system-level approaches. However, so far there have been few discussions on high-frequency rectifier for MHz WPT applications. The soft-switching-based rectifiers, such as the Class E rectifiers, are one of the promising candidates for MHz rectification. This paper investigates the application of a Class E full-wave current-driven rectifier, for the first time, in WPT systems. A procedure is also developed to optimize the design of the rectifier and the MHz WPT system. For comparison purposes, the performances of both the Class E rectifier and the conventional full-bridge rectifier are investigated in terms of total harmonic distortion (THD), efficiency, power factor, voltage/current stresses, and voltage/current transfer functions, when being applied in an example 6.78-MHz WPT system. The simulation and experimental results show that the input voltage THD of the Class E full-wave rectifier is reduced to one-fourth of the THD of the full-bridge rectifier. In the optimally designed MHz WPT system, efficiencies of both the rectification (over 91%) and the overall system (around 80%) are obviously improved compared to the system using the conventional full-bridge rectifier. [ABSTRACT FROM PUBLISHER]

Magnetic resonance coupling working at megahertz (MHz) is widely considered as a promising technology for the mid-range transfer of a medium amount of power. It is known that the soft-switching-based Class E rectifiers are suitable for high-frequency rectification, and thus potentially improve the overall efficiency of MHz wireless power transfer (WPT) systems. This paper reports new results on optimized parameter design of a MHz WPT system based on the analytical derivation of a Class E current-driven rectifier. The input impedance of the Class E rectifier is accurately derived, for the first time, considering the on-resistance of the diode and the equivalent series resistance of the filter inductor. This derived input impedance is then used to develop and guide design procedures that determine the optimal parameters of the rectifier, coupling coils, and a Class E PA in an example 6.78-MHz WPT system. Furthermore, the efficiencies of these three components and the overall WPT system are also analytically derived for design and evaluation purposes. In the final experiments, the analytical results are found to well match the experimental results. With loosely coupled coils (mutual inductance coefficient $k$ =0.1327), the experimental 6.78-MHz WPT system can achieve 84% efficiency at a power level of 20 Watts. [ABSTRACT FROM AUTHOR]