Search

Light-emitting diodes (LEDs) are widely used in street lighting, landscape lighting, liquid crystal display (LCD) backlighting, healthcare, etc. As an important part of LED lighting products, LED driver plays a vital role in maintenance costs reduction, energy saving and lifetime prolongation. In this paper, a single-stage LED driver is proposed, which is integrated by a totem-pole bridgeless power factor correction (PFC) unit and several modular LCL-T resonant rectifiers. The totem-pole bridgeless PFC unit and the LCL-T resonant rectifiers are integrated by sharing switches, which can simplify the circuit and reduce the system cost. The output current can be regulated by applying the variable inductor control. Constant duty cycle and fixed switching frequency operation can be achieved as well. The operating principle and the performance of the proposed converter are analyzed in this paper. In addition, a precise parameter design method is proposed by considering the high-order harmonics. At last, an experimental prototype is established to validate the proposed parameter design and variable inductor control method. [ABSTRACT FROM AUTHOR]

In this article, an online condition monitoring (CM) method is proposed for the bond wire degradation of insulated-gate bipolar transistor (IGBT) modules in a single-phase or three-phase three-level neutral-point-clamped (3LNPC) dc–ac, ac–dc converter. The proposed method has the ability to detect the whole IGBTs in a 3LNPC converter, based on finding the idle on-state IGBTs under the specific load current direction and switching sequence of a leg. The detection time is short (0.2 ms) and the influence of online CM on load current can be completely neglected as long as the insertion areas for CM test are chosen reasonably. Meanwhile, an advanced bond wire CM module is designed to conduct the CM test. This module can generate and inject the current pulse trains into IGBT modules, with the high current for CM test and low current for temperature-sensitive electrical parameter measurement, and sample the collector–emitter on-state voltage (VCE ON) stably and precisely. Finally, the experimental work was carried out to verify the effectiveness of the proposed method and the practicality of the developed CM module. [ABSTRACT FROM AUTHOR]

In this letter, a magnetically controlled single-stage ac–dc converter is proposed for low-power application which has the following features. First, single-stage operation is achieved by sharing switches between LLC resonant converter and totem-pole bridgeless power factor corrector (PFC) converter. Second, the power factor correction function is inherently achieved by designing the PFC converter to operate in discontinuous conduction mode. Third, the dc-link voltage is almost constant. Fourth, fixed switching frequency and duty cycle can be implemented for the switches, which simplifies the magnetic component and driver circuit design. Fifth, the LLC resonant converter is designed to operate at series resonant frequency, the highest efficiency operating point, so the converter can always achieve the maximum efficiency operation. Meanwhile, at this operating point, the converter output voltage is independent of the load so that it is functioning as a dc transformer; and finally, soft switching for all semiconductors is achieved. A 75-W experimental prototype is built to validate the proposed magnetically controlled single-stage ac–dc converter [ABSTRACT FROM AUTHOR]

The LLC resonant converters commonly adopt frequency modulation (FM) or combination of FM with phase-shift modulation to regulate its output voltage. However, in these control schemes, a variable switching frequency range is required, which makes the magnetic components design complicated. Therefore, in this article, magnetic control (or variable inductor control) is adopted to make the converter operating at constant switching frequency and constant duty cycle. The fundamental harmonic analysis is commonly used because of its characteristic of simplicity. However, the accuracy of this method is reduced and considerable errors occur when the switching frequency or output power changes. Therefore, an optimal design methodology based on time-domain analysis of the LLC resonant converter with magnetic control is proposed in this article. The proposed methodology can assure that the converter will operate in PO or OPO modes within the whole operating range, and zero voltage switching operation for primary switches and zero current switching operation for secondary rectifier will be guaranteed. In addition, by limiting the resonant tank root-mean-square current, the system efficiency is improved. A 200-W experimental prototype is built and the effectiveness of the proposed optimal design methodology is verified. [ABSTRACT FROM AUTHOR]

A single-stage high-frequency resonant ac/ac converter converts the ac-line input voltage into the high-frequency sinusoidal output voltage, which consists of two power conversion units, i.e., a power factor correction (PFC) unit and a high-frequency resonant dc/ac unit, and it can be used to derive a modular multichannel constant current LED driver. By adopting a totem-pole bridgeless PFC boost rectifier to reduce conduction losses, a single-stage bridgeless high-frequency resonant ac/ac converter is proposed in this paper. The operating principle is described, and the performance analysis is presented in detail. Moreover, the quantitative parameter design method of the main circuit is presented, which is suitable for other single-stage ac input converters, such as a single-stage PFC rectifier. Finally, a 130-W prototype has been built and tested to verify the correction of related theoretical analysis and parameter design. [ABSTRACT FROM AUTHOR]

In order to reduce the cost and volume of small-medium power ac–dc light-emitting diode (LED) lighting systems, single-stage LED drivers are often used to drive LEDs with constant current. In this paper, a single-stage isolated high-power factor ac–dc LED driver is proposed and analyzed in detail, which is composed of a buck–boost power factor correction unit operating in discontinuous conduction mode and an isolated dc/dc unit with a voltage doubler rectifier, and the two units are integrated together by sharing the same power switch. Very high input power factor is achieved since the PFC unit operates with almost fixed duty ratio during half period of the utility line voltage. Since a voltage doubler rectifier is included in the isolated dc/dc unit, magnetic core size of the transformer and voltage stress of the secondary side diodes are reduced remarkably. First, the operating principle and performance of the LED driver are analyzed. Then, the main parameters are quantitatively calculated out in detail. Finally, a comparative analysis is presented and a 120 W experimental prototype with 1 A output current is built according to the calculated parameters and the experimental results are presented to verify the correctness of the theoretical analysis and parameter design. [ABSTRACT FROM PUBLISHER]