Search

This paper proposes a new model-based diagnostic technique, which is the so-called virtual current technique (VCT), for the diagnosis of rotor faults in direct rotor field oriented controlled (DRFOC) induction motor drives. By measuring the oscillations at twice the slip frequency found in the rotor flux of the machine, and by conjugating this information with the knowledge of some motor parameters, as well as the parameters of the flux and current controllers, it is possible to generate a virtual magnetizing current which, after normalization, allows the detection and quantification of the extension of the fault. The proposed method allows one to overcome the major difficulties usually found in the diagnosis of rotor faults in closed-loop drives by providing information about the condition of the machine in a way that is independent of the working conditions of the drive such as the load level, reference speed, and bandwidth of the control loops. Although the VCT was primarily developed for traction drives used in railway applications, it can be incorporated in any DRFOC drive at almost no additional cost. Several simulation results, obtained with different types of DRFOC drives, as well as experimental results obtained in the laboratory, demonstrate the effectiveness of this new diagnostic approach. [ABSTRACT FROM AUTHOR]

This paper proposes the use of the multiple reference frames theory for the diagnosis of stator faults in three-phase induction motors. The development of a simplified mathematical motor model allowed the establishment of the equivalent circuits of the motor, in d-q-0 axes, in the presence of suitor interturn short circuits. The use of the stationary reference frame, clockwise and counterclockwise synchronous reference frames, allows the extraction and manipulation of the information contained in the motor supply currents in a way that the effects introduced by the fault are easily isolated and measured. A severity factor is defined and the simulation and experimental results presented demonstrate its independence in relation to the working conditions of the motor, such as the load level and unbalances in the voltage supply system. Although the technique is here introduced for the diagnosis of suitor faults, it is possible to extend its use for the diagnosis of other asymmetries such as broken rotor ban and air-gap eccentricity. [ABSTRACT FROM AUTHOR]

This paper addresses the subject of stator fault diagnosis in direct torque control (DTC) induction motor drives. The particularities of the behavior of a DTC drive, when in the presence of inter-turn short circuits, are exploited, thus allowing the proposal of two different approaches for the diagnosis of this type of fault One of the proposed diagnostic techniques is the well known motor current spectrum analysis. It is demonstrated that in a DTC induction motor drive, with stator inter-turn short circuits, the action of the torque and flux controllers introduce a strong third harmonic in the motor supply currents, which can be used to detect this type of fault. The other diagnostic technique is based on the multiple reference frames theory, recently proposed by the authors for the diagnosis of stator faults in line-connected motors. Here, its use is exploited in the diagnosis of stator faults in DTC induction motor drives. [ABSTRACT FROM AUTHOR]