Search

Single-phase-to-ground faults may cause substantial temporary overvoltages (TOVs) in large radial medium-voltage networks with isolated neutral, even over 3-p.u. phase to ground. Resonant neutral earthing limits these overvoltages to 1.8 p.u. but credible earthing apparatus failures might trigger TOVs up to 2.4 p.u. This paper presents the ground fault study of an Italian 20-kV ENEL Distribuzione network. Analytical evaluations in a wide parametric range of neutral earthing arrangements, include isolated neutral and ENEL resonant earthing with parallel resistance, as evidence of 2.4-p.u. TOVs with isolated neutral, 1.8 p.u. with resonant earthing, and more than 2.0 p.u. with partial compensation. Recordings of ground faults staged in the same network are presented, showing excellent agreement between analytical predictions and experimental test. The tests confirm TOVs of more than 2.3 p.u. with isolated neutral, sometimes evolving into cross-country faults (possibly explaining unforeseen cable fault rates), and the effectiveness of the ENEL neutral earthing practices in suppressing these TOVs. [ABSTRACT FROM AUTHOR]

A Cross-Country Fault (CCF) is the simultaneous occurrence of a couple of Line-to-Ground Faults (LGFs), affecting different phases of same feeder or of two distinct ones, at different fault locations. CCFs are not uncommon in medium voltage (MV) public distribution networks operated with ungrounded or high-impedance neutral: despite the relatively small value of LGF current that is typical of such networks, CCF currents can be comparable to those that are found in Phase-To-Phase Faults, if the affected feeder(s) consists of cables. This occurs because the faulted cables’ sheaths/screens provide a continuous, relatively low-impedance metallic return path to the fault currents. An accurate evaluation is in order, since the resulting current magnitudes can overheat sheaths/screens, endangering cable joints and other plastic sheaths. Such evaluation, however, requires the modeling of the whole MV network in the phase domain, simulating cable screens and their connections to the primary and secondary substation earth electrodes by suitable computer programs, such as ATP (which is the acronym for alternative transient program) or EMTP (the acronym for electromagnetic transient program), with substantial input data being involved. This paper presents a simplified yet accurate circuit model of the faulted MV network, taking into account the CCF currents’ return path (cable sheaths/screens, ground conductors, and earthing resistances of secondary substations). The proposed CCF model can be implemented in a general-purpose simulation program, and it yields accurate fault currents estimates: for a 20 kV network case study, the comparison with accurate ATP simulations evidences mismatches mostly smaller than 2%, and never exceeding 5%. [ABSTRACT FROM AUTHOR]