Search

In recent years, SF6/N2 binary mixtures have been used as insulation in second generation gas-insulated metal-enclosed transmission lines mainly because of the greenhouse effect and diseconomy of SF6. Though the synergistic effect of SF6 is known in a uniform electric field, there is little understanding of the synergistic effect phenomenon with parameters in a non-uniform electric field under standard lightning impulse. A series of experiments were designed to increase our knowledge of this and the breakdown characteristics of SF6/N2 under multiple parameters show a negative synergistic effect. Our experimental results with negative lightning impulse demonstrated that the breakdown voltage of N2 increased greater than with both SF6 and its mixtures with increasing gas pressure. When the gas pressure exceeded 0.3MPa, the breakdown voltage of pure N2 was higher than SF6/N2 gas mixtures and even exceeded the value of SF6 at 0.5MPa. A normalization coefficient h was introduced in this research to evaluate the negative synergistic effect. Under negative lightning impulse the analytical results show that the negative synergistic effect increased with the augment of gas pressure. On the other hand, the synergistic effect was reduced with decreasing gas pressure under positive polarity impulse and it appeared to be a negative synergistic effect with the enhancement of field non-uniformity. The analysis of streamer discharge propagation indicates three reasons lead to the negative synergistic effect: similar streamer corona onset voltage, different space charge effect, and dissimilar discharge form of N2 and SF6/N2 gas mixtures. [ABSTRACT FROM AUTHOR]

By using 1 MV Marx generator and a 220 kV GIS bus, an experiment platform has been established, and a stainless steel needle is applied to simulate spike defect, so as to study the influence of pressure, wave front time and electric field on 50 % breakdown voltage (U50) and voltage-time (V-t) characteristics of SF6 gas gap with existence of a spike defect on the bus of GIS under double exponential impulse voltage. When wave front time is short, 50% breakdown voltage of the SF6 gap hardly changes with various pressures, and U50%-P curve turns to be a hump shape when wave front time increases. However, pressure has no significant effect on V-t characteristics. The slope of V-t characteristics curve is negative when wave front time of applied voltage is short (0.08~0.9μs), and it will turn to be positive when wave front time becomes longer (several ~15μs). A new method to fit these V-t characteristics curves under impulse voltage with longer wave front times is proposed. It is found that 50 % breakdown voltage decreases almost linearly with the increase of electric field non-uniformity factors (f), and V-t characteristics cluster with valley-like profile have been drawn at different f. Dispersion of V-t characteristics cluster reduces and the flat region expands with the increase of f, and minimum value of breakdown voltage of SF6 gap with spike defect under impulse voltage, which is of guiding significance for engineering, can be obtained. [ABSTRACT FROM AUTHOR]