Search

The continuous-flow pasteurization apparatus was presented, and the electric field within orange juice was produced via an oscillating magnetic field at 50 kHz, causing the volumetric heating of the juice with initial conductivity of 6.85 mS/cm and 8.76 mS/cm. The process principle, especially numerical relationships between excitation voltage, magnetic field, induced electric field (IEF), induced current density, and temperature profile were elaborated. When applying a rectangular wave of the voltage at 50–1000 V, the waveforms of the magnetic field and IEF in the juice were sine-like and sawtooth waves, respectively. Through electromagnetic simulation, the model was established, which indicated the indirect heating of orange juice via oscillating magnetic field was feasible. As the magnetic field increased, the outlet temperature and induced current density in the juice was improved. Notably, the 4–5 logs CFU/ml inactivation effects on aerobic bacteria, yeast and mold in orange juice could be achieved at 65 °C for 60 s after the treatment. • Engineering characteristics of induced electric field technology was elaborated. • Electromagnetic simulation model was conduced to verify its thermal effect. • Waveform of magnetic field and induced electric field was investigated. • Difference between experimental and predicted temperature was not significant. • Inactivation effects on aerobic bacteria, yeast and mold was achieved. [ABSTRACT FROM AUTHOR]

A novel electromagnetic heat extraction method was presented, whereby mandarin peels residue solution was located in a winding coil subjected to an oscillating magnetic field, and the pectin was extracted under appropriate conditions. Numerical relationships between applied magnetic field and induced electric field (IEF) in the extraction process were elaborated. The results showed that the induced current density, IEF and terminal temperature increased with increasing magnetic field. The maximum current density of 0.35 A/cm corresponds to the highest terminal temperature of 84.6 °C and IEF intensity of 26.6 V/cm. When magnetic field intensity was 1.39 T and the extraction time was 15 min, the maximum yield of pectin reached 9.16 %. In addition, all treatments impacted the ash content, protein content, water-holding capacity (WHC), and oil-holding capacity (OHC) of the obtained pectin. The pectin extracted by electromagnetic heat had the lowest DE value of 71.3 % with 126.55 kDa molecular weight, while the GalA content was at the highest level of 76.18 %. After different treatments, the composition of pectin monosaccharides changed, but there were slight differences in the composition of pectin polysaccharides. Moreover, the electromagnetic heat extracted pectin had light color and an obvious surface fragmentation of the peel residue. [Display omitted] • Novel electromagnetic heat method was presented for the extraction of pectin. • The maximum yield of pectin reached 9.16 % at 1.39 T and 15 min. • Electromagnetic heat extracted pectin had brighter color and highest GalA level. • There were slight differences in the composition of polysaccharides. [ABSTRACT FROM AUTHOR]

Kiwifruit juice is a popular liquid food with a large consumption. It usually needs high temperature sterilization before packaging and selling. Alternating magnetic field can produce alternating induced electric field, then a thermal effect is triggered. This study aims to explore the inner heating of kiwifruit juice via induced electric field and its impact on the physicochemical properties. Meanwhile, ultra-high temperature instantaneous sterilization (121°C, 5 s), and conventional heat treatment (93°C, 2 min) were conducted as controls, then effects were compared between these treatments. The results showed that the bacterial, mold and yeast colonies were completely eliminated, polyphenol oxidase activity decreased by 94.8%, and peroxidase activity decreased by 92.7%, at 1800 V and 6 mL/min. The induced electric field treatment and ultra-high temperature instantaneous sterilization had no significant effect on pH and titratable acid (P ≥ 0.05). Conventional heat treatment increased soluble solid content by 5.3%. The induced electric field treatment resulted in the closest color and browning index to the fresh juice owing to moderate thermal effect. It also demonstrated minimal loss on total phenols and flavonoids contents after induced electric field treatment (7.1% and 2.7%, respectively). The heating effect caused by induced electric field has great application potential for the treatment of fruit juice. • Induced electric field was utilized for direct heating of kiwifruit juice. • Contact-less thermal effect and temperature rise on kiwifruit juice was evaluated. • The microbe and enzyme could be inactivated within 7.7 s via continuous-flow treatment. • The minimal loss of total phenols and flavonoid was achieved via induced electric field. [ABSTRACT FROM AUTHOR]

The novel, previous unreported induction heating technique developed here uses the inverse process of the existing induction heating techniques. The theoretical basis for developing this technique is to determine whether the induced current passing through a winding food coil would induce a magnetic flux or cause an increase in primary current. Therefore, to develop this technique and implement it in the food industry, it is necessary to understand its technical details and engineering characteristics. This study presents the design and development process of the technique, as well as the calculation formulas, including load voltage, induced electric field, induced current density, heating power and energy utilization rate during the heating process. The results reveal that although the application of this innovative inner heating technique has been achieved, the energy efficiency of the current system is low. The thermal effect and non-thermal effect of the induced electric field decreased the total bacterial counts in the samples of grapefruit juice and raw milk. Image 10083 • Innovative induction heating is a sister technology to ohmic heating in the food industry. • Liquid food can act as the secondary winding of a transformer for inner heating. • A thermal effect on liquid foods by an alternating magnetic field was observed. • The development and design process of this novel technique are presented. • Continuous-flow pasteurization of liquid food was achieved by an induced electric field. [ABSTRACT FROM AUTHOR]

In this study, the air gap magnetic field characteristics of external rotor permanent magnet synchronous motors (PMSMs) under both the stator and rotor coordinate systems considering low‐order current harmonics and high‐order sideband current harmonics are analysed. A direct measurement technique (DMT) for air‐gap magnetic field is proposed. First, an analytical model of air gap magnetic field of external rotor PMSMs is established. The spatial order and frequency characteristics of stator/rotor air gap magnetic field are revealed. Then, a 24‐pole 27‐slot external rotor PMSM is taken as an example. The analytical and finite element (FE) results are compared and analysed. The difference of the spatial order and frequency characteristics between the stator and rotor air gap magnetic field are verified. Next, a new DMT is proposed, which can detect the precise distribution and local microscopic characteristics on the order of 10−1 mm with high resolution. The accuracy of analytical and FE model are verified by the DMT and an indirect experimental test of no‐load back electromotive force. Finally, the mechanical challenges of in‐wheel motors and the practicablility of DMT for eccentricity detection are further discussed. [ABSTRACT FROM AUTHOR]