Search

Magnetic resonance coupling working at megahertz (MHz) is widely considered as a promising technology for the mid-range transfer of a medium amount of power. It is known that the soft-switching-based Class E rectifiers are suitable for high-frequency rectification, and thus potentially improve the overall efficiency of MHz wireless power transfer (WPT) systems. This paper reports new results on optimized parameter design of a MHz WPT system based on the analytical derivation of a Class E current-driven rectifier. The input impedance of the Class E rectifier is accurately derived, for the first time, considering the on-resistance of the diode and the equivalent series resistance of the filter inductor. This derived input impedance is then used to develop and guide design procedures that determine the optimal parameters of the rectifier, coupling coils, and a Class E PA in an example 6.78-MHz WPT system. Furthermore, the efficiencies of these three components and the overall WPT system are also analytically derived for design and evaluation purposes. In the final experiments, the analytical results are found to well match the experimental results. With loosely coupled coils (mutual inductance coefficient $k$ =0.1327), the experimental 6.78-MHz WPT system can achieve 84% efficiency at a power level of 20 Watts. [ABSTRACT FROM AUTHOR]

Wireless power transfer has shown revolutionary potential in challenging the conventional charging method for consumer electronic devices. Through magnetic resonance coupling, it is possible to supply power from one transmitter to multiple receivers simultaneously. In a multiple-receiver system, the overall system efficiency highly depends on the loads’ and receivers' positions. This paper extends the conventional circuit-model-based analysis for the one-receiver system to investigate a general one-transmitter multiple-receiver system. It discusses the influence of the loads and mutual inductance on the system efficiency. The optimal loads, the input impedance, and power distribution are analyzed and used to discuss the proper system design and control methods. Finally, systems with a different number of receivers are designed, fabricated, and measured to validate the proposed method. Under the optimal loading conditions, an efficiency above 80% can be achieved for a system with three different receivers working at 13.56 MHz. [ABSTRACT FROM PUBLISHER]