Search

Presents information on a study which proposed a zero-voltage switching (ZVS) scheme for a three-level capacitor clamping inverter based on a true pulsewidth modulation pole. Main circuit modulation strategy and proposed ZVS topology; Theoretical analysis of the commutation process; Design methodology of the auxiliary circuit; Conclusions.

This paper describes a theoretical and experimental study on a control strategy for the parallel operation of single-phase voltage source inverters (VSI), to be applied to uninterruptible power supply. The control system for each inverter consists of two main loops, which both use instantaneous values. The first (parallelism control) employs the feedback of the inductor current from the output filter to modify the input voltage of the same filter and, therefore, to control the power flow of each inverter to the load. Additionally, the second loop (voltage control) is responsible for controlling the output voltage of the LC filter, which coincides with the output voltage of the VSI. Due to the fact that there is no exchange of information among the VSIs regarding their operation points, it is easier to obtain redundant systems. Furthermore, the connection (or disconnection) of inverters in a parallel arrangement is carried out directly, without connection impedance, and can occur at any operation point of the system. The proposed control strategy ensures the proper sharing of the load current and avoids current circulation among the inverters during transient and steady-state operation. Moreover, its design and implementation are very simple. The control technique was verified through experimental results with a maximum load of 10 kVA supplied by three parallel-connected inverters. [ABSTRACT FROM PUBLISHER]

This paper presents a zero-voltage (pulsewidth modulation) half-bridge inverter with active voltage clamping using only a single auxiliary switch. The structure is particularly simple and robust. It is very attractive for single-phase high-power applications. Switching losses are reduced due to implementation of the simple active snubber circuit that provides zero-voltage-switching conditions for all switches, which includes the auxiliary one. Its main features are simple modulation strategy, robustness, low weight and volume, low harmonic distortion of the output current, and high efficiency. The principle of operation for steady-state conditions, mathematical analysis, and experimental results from a laboratory prototype are presented. [ABSTRACT FROM AUTHOR]