Search

This paper proposes a signal feedback interference topology to control the characteristics of a coupled line bandpass filter. Control is carried out by varying the ratio of the transmission line parameters of the forward and the feedback couplers. The topology produces a compact filter that does not require a complicated design or fabrication. The results of the insertion and return losses show that the feedback‐controlled design has desirable features in terms of the design frequency, fractional bandwidth, stopband rejection level, roll‐off rate and insertion loss. The test results of the fabricated prototype achieved good agreement with the simulation results of the ideal transmission line design model. Several microwave, modern wireless and mobile/satellite communication systems may benefit from such a filter design due to its compactness and flexibility. [ABSTRACT FROM AUTHOR]

Abstract This paper presents the experimental verification of the tunable characteristics of a ferrite composite right/left handed coupled line coupler. The coupler is designed using two coupled CRLH-CRLH transmission lines. The coupler is designed to demonstrate equal through and backward coupling. The novel coupler has been designed and realized in coplanar waveguide configuration on a ferrite substrate. The tunable characteristics are achieved by changing the applied DC magnetic bias to the ferrite substrate. The measurement results reveal that the coupler's fractional bandwidth can be tuned from 29% to 69% by varying the applied DC magnetic bias from 1000 Oe to 1750 Oe. Within the tunable bandwidth, the maximum backward coupling is −5 dB. The coupler has high forward coupling isolation, close to −30 dB at its centre operating frequency. In addition to its tuning capability, the coupler has the advantages of its compact size; it has the length of 11.5 mm and not-so-tight line separations of 2.5 mm. Furthermore the coupler only requires low DC magnetic bias. [ABSTRACT FROM AUTHOR]

In this paper, a novel compact and tunable impedance transmission line transformer is presented for the first time. The transformer is designed using a left handed coplanar waveguide transmission line on a ferrite substrate. Based on the dispersive properties of the ferrite medium, the theoretical study of the transformer has been carried out using its equivalent circuit analysis and the composite right / left handed transmission line theory. The theoretical study was verified through full wave electromagnetic numerical simulations. The results show that the transformer matches a 25 Ω load to a 50 Ω line with tunability from 2.55 GHz to 3.2 GHz. The return loss at center frequency is better than 20 dB with insertion loss better than -1 dB. The transformer has a very compact size with dimensions of 4.25 × 21 mm, showing approximately 64% reduction in size in comparison with a conventional right-handed transformer within the same operating frequency band. Moreover, the proposed coplanar waveguide transformer configuration has smaller demagnetization factor and hence it requires smaller DC magnetic bias values compared to microstrip configuration. [ABSTRACT FROM AUTHOR]

A novel ferrite nonreciprocal left-handed (LH) transmission line is presented. The proposed structure is composed of a coplanar waveguide over a ferrite substrate, horizontally magnetized and periodically loaded with only shunt inductors. The line has a nonreciprocal LH propagation with transmission level better than -5 dB with isolation level up to 20 dB over a moderate bandwidth. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2810–2814, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22848 [ABSTRACT FROM AUTHOR]