Search

Electric motors with a double air-gap structure offer increased power or torque density compared to their single air-gap counterparts, achievable through double-stator or double-rotor configurations. In a previous study, the authors proposed a double-stator permanent magnet synchronous motor (PMSM) with a magnetic screen placed in the middle of the rotor to isolate the outer and inner motors. However, the analysis of the magnetic screen was not provided in that study, as the design was arbitrarily chosen. This research focuses on the effects of the magnetic screen size and selects the appropriate dimensions for optimal motor performance. Finite element analysis (FEA) is employed to assess the electromagnetic characteristics of the screen. Subsequently, the motor is manufactured and tested. The results show that the chosen magnetic screen size contributes to significant efficiency improvements. In particular, the motor achieved an efficiency of 95.2% during the qualification test, surpassing the efficiency obtained in the previous study. [ABSTRACT FROM AUTHOR]

This paper presents a novel 6/5 segmental rotor-type switched reluctance motor (SRM) for cooling fan application. Unlike conventional structures, the rotor of the proposed structure is constructed from a series of discrete segments, and the stator is constructed from two types of stator poles: exciting and auxiliary poles. Meanwhile, the windings are only placed around the exciting poles, resulting in short flux paths and no flux reversal in the stator of the proposed SRM. Hence, the proposed structure may increase the electrical utilization and reduce magnetomotive force (MMF) requirement compared to conventional SRMs. To verify the proposed structure, the operation principle and the design rules of the proposed structure are illustrated and expounded. The finite-element method (FEM) is employed to get the static and dynamic characteristics of the conventional 12/8 and proposed SRMs. Furthermore, the prototype is manufactured and tested. Finally, the simulation and experimental results are presented and analyzed to verify the effectiveness of the proposed SRM. [ABSTRACT FROM AUTHOR]

This paper presents the design and operation of a two-phase four-two pole switched reluctance motor (SRM) for a high-speed air blower. The air blower has unidirectional rotation and requires a wide positive torque region without torque dead zone. In order to achieve the requirements, a nonuniform air gap with asymmetric inductance profile is considered. For a flattop torque with a low torque ripple, the nonuniform air gap is also effective. Based on the output torque analysis at the rotor position for the given air gap, the air gap is modified to reduce the torque ripple. The optimized air gap at a given position cannot feel the effect of the air gap at a previous rotor position. Therefore, the output torque cannot fully satisfy the target torque in one optimization process. In order to satisfy the target torque and reduce the torque ripple, the second optimization process is implemented considering the output torque of the initial optimization process. The second target torque is determined by the torque error of the initial output torque and target torque of the first process. From this optimization sequence, the final air gap, as a function of the rotor position, can be determined to satisfy the torque ripple requirement. The proposed high-speed four-two pole SRM is tested to verify the high-efficiency and low-acoustic-noise characteristics. [ABSTRACT FROM PUBLISHER]