Search

This paper proposes a new battery cell voltage equalization approach using multiple-receiver wireless power transfer (WPT) working at megahertz (MHz). Compared with existing multiwinding transformer, the MHz multiple-receiver WPT system is advantageous in terms of saved weight and space, ease of implementation, and improved safety. In this paper, the unique operating principle of the WPT-based equalization is first explained, through which equalization currents are naturally determined by the battery cell voltage distribution. The currents are also analytically derived. This facilitates the discussion on power amplifier (PA) design. Performance analysis is then provided to investigate the influences of system parameters on the efficiency and equalization ability of the proposed WPT-based equalization system, and thus guide following design and implementation. Considering the uncertainty in PA load due to the random cell voltage distribution, a current-model Class $E$ PA is designed that enables approximately constant PA output current. Experimental results show that the proposed multiple-receiver WPT-based battery cell equalization system can achieve high overall system efficiency (above 71%) when equalizing six lithium-ion battery cells under loosely coupling ( $k$ = 0.065). A good match between the experimental and calculation results also validates the correctness of the theoretical discussion. [ABSTRACT FROM PUBLISHER]

Wireless power transfer (WPT) working at megahertz (MHz) is now being widely considered a promising candidate for the midrange transfer of a medium amount of power. Efforts have been made to build high-efficiency MHz WPT systems via both component- and system-level approaches. However, so far there have been few discussions on high-frequency rectifier for MHz WPT applications. The soft-switching-based rectifiers, such as the Class E rectifiers, are one of the promising candidates for MHz rectification. This paper investigates the application of a Class E full-wave current-driven rectifier, for the first time, in WPT systems. A procedure is also developed to optimize the design of the rectifier and the MHz WPT system. For comparison purposes, the performances of both the Class E rectifier and the conventional full-bridge rectifier are investigated in terms of total harmonic distortion (THD), efficiency, power factor, voltage/current stresses, and voltage/current transfer functions, when being applied in an example 6.78-MHz WPT system. The simulation and experimental results show that the input voltage THD of the Class E full-wave rectifier is reduced to one-fourth of the THD of the full-bridge rectifier. In the optimally designed MHz WPT system, efficiencies of both the rectification (over 91%) and the overall system (around 80%) are obviously improved compared to the system using the conventional full-bridge rectifier. [ABSTRACT FROM PUBLISHER]