Search

This paper proposes an isolated three-phase rectifier power-factor correction using two single-phase buck preregulators in continuous conduction mode. The use of the Scott transformer renders a simple and robust rectifier to operate with unity power factor. With only two active switches, the rectifier is able to generate symmetrical currents in the line and a regulated voltage output without any necessary synchronous switches. The proposed control technique with sinusoidal pulse width modulation uses a feedforward of the output inductor current and only one voltage control regulates the output. Complete simulation results under closed-loop operation are given and a 12-kW prototype has been implemented in the laboratory, which demonstrated to operate successfully with excellent performance, and thus can feasibly be implemented in higher power applications. [ABSTRACT FROM AUTHOR]

The focus of this paper is the study of direct alternating-current (ac)–ac converters, beginning by buck, half-bridge, full-bridge, and push–pull converters. From the basic converters, we apply a simple methodology to make the use of switches in commercial configurations possible. Following that, eight voltage restorers supplied either on the line side or on the load side are proposed. A comparative evaluation of these topologies concerning implementation, complexity, and component effort is presented. It is notable that some of the studied topologies are known in the literature and others are new. For one of the presented topologies, the design of a 3-kVA voltage restorer is developed, and experimental results are shown, certifying the correct operation of the drive strategy used. [ABSTRACT FROM AUTHOR]

This paper presents a zero-voltage (pulsewidth modulation) half-bridge inverter with active voltage clamping using only a single auxiliary switch. The structure is particularly simple and robust. It is very attractive for single-phase high-power applications. Switching losses are reduced due to implementation of the simple active snubber circuit that provides zero-voltage-switching conditions for all switches, which includes the auxiliary one. Its main features are simple modulation strategy, robustness, low weight and volume, low harmonic distortion of the output current, and high efficiency. The principle of operation for steady-state conditions, mathematical analysis, and experimental results from a laboratory prototype are presented. [ABSTRACT FROM AUTHOR]