Search

This paper proposes a vector control strategy for LCL-filter-based grid-connected voltage-source converters (VSCs). The proposed control strategy is inherently capable of attenuating the resonance phenomenon of such systems. This is an advantage over the existing methods, which require additional damping techniques. Moreover, the proposed vector control strategy is able to fully decouple the direct (d) and quadrature (q) components of the current in a rotating reference frame. The design procedure comprises a constrained optimization-based loop shaping. It utilizes the multi-input multi-output (MIMO) nonparametric model of the system along with a high-order linearly parameterized MIMO controller to form an open-loop transfer function matrix. Minimizing the second norm of the error between the open-loop transfer function matrix and a desired one, the coefficients of the controller are optimally determined. Conducting several reference tracking scenarios, the performance of the proposed vector controller is evaluated both by means of time-domain simulation studies in MATLAB/Simulink and experimental results. [ABSTRACT FROM AUTHOR]

Low system voltage in traction networks, mainly caused by active power absorption of locomotives, adversely affects the performance of the locomotives and also the power transmission capability of the catenary line. This paper introduces a voltage support scheme to compensate for the adverse effects of low system voltage. The proposed method is based on the injection of reactive power through the current-controlled line-side converter of locomotives. Comparing the catenary voltage with its reference value, the error is fed to a high-order controller. The controller generates the quadrature (q)-axis reference value of a current control strategy, which is responsible for the reactive power injection. To design the high-order controller, adopting the nonparametric models of the system at various locations, an optimization-based loop-shaping approach is used. The loop shaping guarantees the stability and the acceptable performance of the closed-loop system for various locomotive positions in the network. The performance of the proposed control strategy is evaluated based on simulation results in MATLAB/PLECS environment. Moreover, implementing a scaled-down laboratory setup, the performance of the proposed scheme is experimentally evaluated. [ABSTRACT FROM AUTHOR]

This paper presents a linear direct–quadrature current control strategy for voltage source converters (VSCs) in a rotating reference frame (RRF). The described method is based on multivariable-proportional–integral (PI) regulators and provides fast dynamics and a zero steady-state error. Contrary to the well-known conventional PI-based control strategies in RRFs, the presented method provides practically decoupled axes with a superior disturbance rejection capability. Moreover, its implementation is relatively simple and does not impose excessive structural complexity compared to its conventional PI-based competitors. The method is applicable to both single- and three-phase systems and also to anisotropic three-phase systems, e.g., synchronous motors with different direct and quadrature impedances driven by VSCs. Implementing a three-phase test system, the performance of the presented method is experimentally evaluated. [ABSTRACT FROM AUTHOR]

This paper analytically determines the nondetection zone (NDZ) of an active islanding detection method, and proposes a solution to obviate the NDZ. The method actively injects a negative-sequence current through the interface voltage-sourced converter (VSC) of a distributed generation (DG) unit, as a disturbance signal for islanding detection. The estimated magnitude of the corresponding negative-sequence voltage at the PCC is used as the islanding detection signal. In this paper, based on a laboratory test system, the performance of the islanding detection method under UL1741 anti-islanding test conditions is evaluated. Then, determining the NDZ of the method and proposing the countermeasure, the existence of the NDZ and the performance of the modified method to eliminate the NDZ is verified based on simulation results in PSCAD/EMTDC software environment and experimental tests. [ABSTRACT FROM AUTHOR]