Search

Prior experiments have demonstrated that the pole in a magnetically shielded Hall thruster sputters and erodes visibly, in contrast with that in an unshielded thruster. To determine the reason for this, a particle-in-cell simulation was conducted, and the difference between shielded and unshielded thrusters in terms of plasma behavior near the exit plane was studied. The results show that in the case of the magnetically shielded thruster, the ion flux peak is on the magnetic pole face with higher ion energy, indicating severer erosion at the pole. By contrast, the flux peak of the unshielded thruster is on the head face of the channel wall, indicating severer bombardment at the wall and milder erosion at the pole. Therefore, pole erosion occurs in the magnetically shielded thruster, and channel head face erosion can be observed in the unshielded thruster. In addition, the simulation results indicate that the greater the outward shift of the magnetic field, the severer the pole erosion. [ABSTRACT FROM AUTHOR]

The characteristics of low-frequency oscillations of double-stage Hall thrusters are quite different from those of conventional single-stage Hall thrusters. In this paper, the effects of double-stage discharge on the low-frequency oscillations are experimentally investigated. The results indicate that the amplitude significantly decreases with increasing magnetic field strength and voltage during the ionization stage. Meanwhile, data analysis reveals that ionization occurs in both stages and that the transport ion current between the two stages is the key factor that affects the amplitude and main frequency of the oscillations. Two new processes, namely the ion transport and ion recombination caused by double-stage discharge, are found to be relevant to the change in the current oscillations. To summarize, the ionization stage relieves the oscillations in the acceleration stage, leading to a reduction in the amplitude of the discharge current. [ABSTRACT FROM AUTHOR]

The high amplitude pulse current during Hall thruster start-up is an important source of electromagnetic interference, which impacts the safety and reliability of the propulsion system. The characteristics of the pulse current, including the pulse current's integrated area, peak value, and transient time, are studied experimentally and theoretically under different Hall thruster discharge parameters. Results show that the pulse current's integrated area is determined by the atom density in the channel before Hall thruster start-up; the effects of coil current on the peak value and transient time of the pulse current are negligible. As the discharge voltage and mass flow rate increase, the pulse current peak value increases, the pulse current duration is inversely proportional to the discharge voltage and directly proportional to the mass flow rate. [ABSTRACT FROM AUTHOR]

In recent years, high-voltage and high-specific-impulse Hall thrusters are being developed. However, the efficiency of the Hall thruster does not increase monotonically with the discharge voltage, but reaches peak at an intermediate voltage, which limits the ability of high-voltage Hall thruster. Previous studies indicate that the sharp increase of the wall energy loss at high voltages dominates the occurrence of the efficiency peak. Therefore, a peak-pushed-outside (PPO) magnetic field is designed in this study, which is expected to diminish the wall energy loss. Experimental results show that the PPO magnetic field can push the propellant ionization and acceleration process downstream, reduce the wall energy deposition at high voltages effectively, and therefore improve the efficiency peak value and increase the voltage corresponding to the efficiency peak. This is helpful to enlarge the high-voltage operation range of Hall thrusters. However, the discharge oscillation rises up significantly at high voltages, and the thruster performance degrades at low voltages, which requires further investigation. • Peak-pushed-outside magnetic field reduces wall energy deposition in Hall thrusters greatly. • Peak-pushed-outside magnetic field promotes the efficiency peak and the corresponding discharge voltage in Hall thrusters. • Peak-pushed-outside magnetic field is suitable for high-voltage Hall thrusters. [ABSTRACT FROM AUTHOR]