Search

This paper proposes two direct torque control (DTC) strategies to reduce the common-mode voltage (CMV) in the five-phase induction motor driven by three-level five-phase inverter. In each technique, 31 voltage vectors consisting of 30 nonzero voltage vectors, and a zero voltage vector are selected out of available 243 voltage vectors. The selection of these voltage vectors are based on their capabilities of reducing the CMV, eliminating the x–y stator flux and maintaining the torque ripple under control. The ten large, ten small, and a zero voltage vector are same in both schemes, however only difference in designing the control strategy for the two schemes is the utilization of different ten medium voltage vectors. First proposal (DTC-I) reduces the CMV to $3V_{{\rm{dc}}}\,/ 10$ and second proposal (DTC-II) reduces to $V_{{\rm{dc}}}\,/ 10$. These schemes are compared with DTC technique of five-phase induction motor fed by two-level five-phase inverter in order to judge the capabilities of proposed schemes in context of reducing the CMV. The simulation and experimental results validate the proposed DTC techniques. [ABSTRACT FROM AUTHOR]

This paper presents a Direct Torque Control (DTC) strategy for the five-phase induction motor driven by a three-level five-phase inverter in order to improve the performance of the five-phase induction motor. In the proposed DTC technique, only 22 voltage vectors out of 243 available voltage vectors in a three-level five-phase inverter are selected and are divided in 10 sectors each with a width of 36°. The four different DTC combinations (DTC-I, II, III and IV) for a three-level five-phase induction motor drive are investigated for improving the performance of five-phase induction motor. All four of the DTC strategies utilize a combination of the same large and zero voltage vectors, but with different medium voltage vectors. Out of these four techniques, DTC-II gives the best performance when compared to the others. This DTC-II technique is analyzed in detail for improvements in the performance of five-phase induction motor in terms of torque ripple, x-y stator flux and Total Harmonics Distortion (THD) of the stator phase current when compared to its two-level counterparts. To verify the effectiveness of the proposed three-level five-phase DTC control strategy, a DSP based experimental system is build. Simulation and experimental results are provided in order to validate the proposed DTC technique. [ABSTRACT FROM AUTHOR]