Search

Some of DC actuators used in home automation, office automation, medical equipment and automotive systems require a position sensor. In low power applications, the introduction of such a transducer remarkably increases the whole system cost, which justifies the development of sensorless position estimation techniques. The well-known AC motor drive sensorless techniques exploiting the fundamental component of the back electromotive force cannot be used on DC motor drives. In addition, the sophisticated approaches based on current or voltage signal injection cannot be used. Therefore, an effective and inexpensive sensorless position estimation technique suitable for DC motors is presented in this paper. This technique exploits the periodic pulses of the armature current caused by commutation. It is based on a simple pulse counting algorithm, suitable for coping with the rather large variability of the pulse frequency and it leads to the realization of a sensorless position control system for low cost, medium performance systems, like those in the field of automotive applications. [ABSTRACT FROM AUTHOR]

A three-phase multi-level multi-input power converter topology is presented for grid-connected applications. It encompasses a three-phase transformer that is operated on the primary side in an open-end winding configuration. Thus, the primary winding is supplied on one side by a three-phase N-level neutral point clamped inverter and, on the other side, by an auxiliary two-level inverter. A key feature of the proposed approach is that the N-level inverter is able to perform independent management of N − 1 input power sources, thus avoiding the need for additional dc/dc power converters in hybrid multi-source systems. Moreover, it can manage an energy storage system connected to the dc-bus of the two-level inverter. The N-level inverter operates at a low switching frequency and can be equipped with very low on-state voltage drop Insulated-Gate Bipolar Transistor (IGBT) devices, while the auxiliary inverter is instead operated at low voltage according to a conventional high-frequency two-level Pulse Width Modulation (PWM) technique and can be equipped with very low on-state resistance Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) devices. Simulations and experimental results confirm the effectiveness of the proposed approach and its good performance in terms of grid current harmonic content and overall efficiency. [ABSTRACT FROM AUTHOR]

The development and the validation of an averaged-value mathematical model of an asymmetrical hybrid multi-level rectifier is presented in this work. Such a rectifier is composed of a three-level T-type unidirectional rectifier and of a two-level inverter connected to an open-end winding electrical machine. The T-type rectifier, which supplies the load, operates at quite a low switching frequency in order to minimize inverter power losses. The two-level inverter is instead driven by a standard sinusoidal pulse width modulation (SPWM) technique to suitably shape the input current. The two-level inverter also plays a key role in actively balancing the voltage across the DC bus capacitors of the T-type rectifier, making unnecessary additional circuits. Such an asymmetrical structure achieves a higher efficiency compared to conventional PWM multilevel rectifiers, even considering extra power losses due to the auxiliary inverter. In spite of its advantageous features, the asymmetrical hybrid multi-level rectifier topology is a quite complex system, which requires suitable mathematical tools for control and optimization purposes. This paper intends to be a step in this direction by deriving an averaged-value mathematical model of the whole system, which is validated through comparison with other modeling approaches and experimental results. The paper is mainly focused on applications in the field of electrical power generation; however, the converter structure can be also exploited in a variety of grid-connected applications by replacing the generator with a transformer featuring an open-end secondary winding arrangement. [ABSTRACT FROM AUTHOR]

A novel approach of exploiting the stator-temperature-monitoring system to perform sensorless rotor-position estimation is described in this paper. The rotor position is, in fact, estimated by processing the voltages induced in thermistor cablings, which are modified in order to work as search coils (SCs). Using SCs, some typical drawbacks of sensorless position-estimation techniques based on the manipulation of fundamental components of stator voltages and currents, such as those related to inverter non-linearities, stator-resistance voltage drops, magnetic saturation and cross-coupling, can be overcome or mitigated. According to the proposed approach, a rotor-position-tracking technique for synchronous reluctance motor drives is developed independently from motor parameters. Such a sensorless rotor-position-estimation technique can be directly used to build up a sensorless controller or to improve the performance of conventional model based sensorless control systems. Simulations and experimental tests confirm the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

In this paper, the rotor position of a synchronous reluctance motor is estimated exploiting the natural saliency of the machine through an addition of a small high-frequency sinusoidal voltage to the stator voltage reference. Due to rotor saliency, a stator voltage component is generated orthogonal to the added signal, whose amplitude depends on the phase displacement between the d-axis and the direction of the injected signal. A robust rotor position tracking can be accomplished by adjusting the direction of the carrier voltage in order to minimize the amplitude of the generated orthogonal voltage. The proposed technique allows zero-speed operation, does not require additional voltage or current sensors, and can easily correct the influence of the armature reaction. Experimental results confirm the validity of the proposed sensorless technique. [ABSTRACT FROM AUTHOR]

This paper exploits the interaction between the low-frequency and the high-frequency fields created by signal-injection techniques during sensorless estimation of the air-gap flux position in induction machines. Such an interaction causes new phenomena that can be summarized in a modulation of the machine saturation level and creation of harmonics that contain information about the position of the flux. This paper analyzes the issues related to the presence of additional fields and predicts the resulting harmonic content using three different approaches such as analytical calculations, computer simulation, and finite element analysis. Experimental measurements confirm the conclusions of this paper. [ABSTRACT FROM AUTHOR]