Search

Summary: This paper proposes a simplified harmonic field‐excitation scheme for the brushless operation of wound‐rotor synchronous machines (WRSMs). The proposed scheme involves two inverters that are operating at different frequencies to provide an input current to the armature winding of the machine. One of these two inverters works at a frequency of 60 Hz and provides the regular three‐phase fundamental current, whereas the second inverter works at 180 Hz frequency to supply the single‐phase third‐harmonic to the common point of the start‐connected stator winding of the machine. The proposed method has the advantage that a conventional single‐phase inverter can be used for generating the third‐harmonic current which only needs to be operated at three times the frequency of the first inverter supplying the three‐phase fundamental current. The fundamental three‐phase current generates the main armature field, and the single‐phase third‐harmonic current produces a pulsating magnetomotive force, that induces electromotive force (EMF) in the harmonic winding of the rotor. The induced EMF is rectified to supply field current to the rotor and generates the rotor field. This field, when interacts with the main armature field, produces torque. The proposed brushless field‐excitation scheme for WRSMs is implemented in JMAG‐Designer version 19.1 using 2‐D finite element analysis to realize its operation and analyze its performance. [ABSTRACT FROM AUTHOR]

Numerous industrial facilities involve the installation of load transformers with their respective loads. As these loads are engaged and disengaged, their transformers are also energized and de-energized, respectively. An inrush current, which typically occurs when a transformer is energized, can easily be observed for an online uninterruptible power supply (UPS) system feeding such loads. This paper proposes an online UPS system that eliminates the inrush current phenomenon caused by the switching-in of the load transformers. The UPS inverter specifically utilizes a fast acting current control scheme which enables it to regulate the load current during all energizing conditions of the load transformer connected to the UPS system. Experimental results are provided to validate the effectiveness of the proposed UPS system. [ABSTRACT FROM PUBLISHER]

Numerous critical load applications rely upon a line-interactive uninterruptible power supply system to maintain power during outages as well as during under- and over-voltage utility conditions. When any disturbance occurs at the utility side, the line-interactive uninterruptible power supply system takes over the load within a few milliseconds to avoid interruption. However, during this transition of load, a significant inrush current occurs due to the magnetic saturation of the load transformer. The inrush current phenomenon causes reduced line voltages and sometimes activates the over-current protection of the uninterruptible power supply system. This article proposes a new line-interactive uninterruptible power supply system that eliminates the inrush current phenomenon by connecting a standard current-regulated voltage source inverter to the secondary of the load transformer. During any transient condition at the utility side, the load current is monitored and regulated to achieve a seamless compensation or transition of load. Experimental results are obtained for a prototype during a number of possible irregular utility power conditions to endorse the performance of the proposed uninterruptible power supply system. [ABSTRACT FROM PUBLISHER]

This paper presents a new high-efficient three-phase brushless wound rotor synchronous machine (BL-WRSM) based on a sub-harmonic field excitation technique. In the proposed machine topology, the stator is equipped with two different three-phase windings: (1) main armature winding, and (2) additional armature winding. The main armature winding is based on a 4-pole winding configuration, whereas the additional armature winding is based on a 2-pole winding configuration. Both windings are supplied current from two different inverters, i.e., inverter-1, inverter-2, and simultaneously. Inverter-1 provides the regular input current to the main armature winding, whereas inverter-2 provides a three-phase current of low magnitude to the 2-pole additional armature winding. This generates an additional sub-harmonic component of MMF in the airgap beside the fundamental MMF. On the other side, the rotor is equipped with (1) harmonic, and (2) field windings. These windings are electrically coupled via a rectifier. The fundamental component of MMF produces the main rotating magnetic field, whereas the sub-harmonic MMF gets induced in the harmonic winding to produce harmonic current. This current is rectified to give DC to the rotor field winding to attain brushless operation. To authenticate the operation and analyze its performance, the proposed BL-WRSM topology is supported using 2-D finite element analysis (FEA) in JMAG-Designer. Later on, the performance of the proposed brushless topology is compared with the customary BL-WRSM topology to verify its high efficiency, high output torque, low torque ripple, and low unbalanced radial force on the rotor. [ABSTRACT FROM AUTHOR]

In an open-winding machine, three-phase stator currents can be controlled such that the input armature currents may contain the third-harmonic current component in addition to the fundamental. Considering this attribute of open-winding patterns, a harmonic current field excitation technique for a wound rotor synchronous machine (WRSM) is proposed in this paper based on the control of time-harmonic magneto-motive force. Two inverters connected to both terminals of the stator winding are controlled so that the input armature current generates an additional third-harmonic current component. This third-harmonic component generates a vibrating magnetic field that induces a current in the specially designed rotor harmonic winding. The current is supplied as DC current to the rotor excitation winding to generate a rotor field by using a full-bridge diode rectifier in order to achieve brushless operation. The proposed dual-inverter-controlled brushless operation for a WRSM is executed in ANSYS Maxwell using 2-D finite element analysis to validate its operation and electromagnetic performance. [ABSTRACT FROM AUTHOR]

This manuscript discusses a novel harmonic current excitation technique for a wound rotor synchronous machine based on control of the time harmonic magneto-motive force (MMF) for brushless operation. Two inverters are used to feed the armature winding in such a way that at a time, one inverter supplies the current to armature winding. The two inverters are 180° phase-shifted. The inverter assignment is based on time-division multiplexing technique to generate continuous armature currents containing reasonable third-harmonic component beside fundamental component. This third-harmonic current component generates pulsating MMF and is induced in the rotor harmonic winding; the induced current is rectified and applied to rotor field winding to generate rotor field. The rotor field interacts with armature fundamental current component for torque generation. Finite element analysis is performed to verify the idea. [ABSTRACT FROM AUTHOR]