Search

Fault indicating devices such as fault indicators (FIs) have been widely used in distribution systems to improve reliability and reduce outage duration. Recently, FIs with communication interfaces are integrated into distribution automation (DA) to further reduce fault-finding time by reporting FIs' statuses back to control center. When faults occur, a lot of alarms and fault information are received from Outage Management System (OMS), Trouble Call System (TCS) and Customer Information System (CIS) and are shown to system operators. As a result, the identification of faulted line sections in a wide-ranging distribution system from FIs' statuses is not an easy task, especially when multiple faults occur simultaneously and/or distributed generators (DGs) are connected. An automatic and fast faulted line-section location method for distribution systems based on FIs is proposed in this paper. The line sections between adjacent FIs can be treated as a possible fault location (PFL) and the fault current detected by the FI can be considered as line current (LC) flowing between the adjacent PFLs. A relationship matrix between PFLs and LCs is then derived and used to design the proposed automatic and fast faulted line-section location method. The faulted line sections can then be located effectively and efficiently by the proposed method. Test results for an actual distribution system demonstrate the validity of the proposed faulted line-section location method. [ABSTRACT FROM PUBLISHER]

Utilizing battery storage systems (BSSs) can reduce the intermittent output of PV generation systems (PVGSs) and make them dispatchable. The aim of this paper is to design an optimal charging/discharging scheduling for BSSs such that the line loss of distribution systems interconnected with sizeable PVGSs can be minimized. A mathematical model for BSSs which can be used to simulate the charging procedures such as the commonly-used constant current to constant voltage (CC-CV) charging method, the discharging procedures and the state of charge (SOC) is proposed first. The minimum line loss problem considering the intermittent output of PVGSs and the scheduling of BSSs is then formulated based on the BSS mathematical model. The optimal charging/discharging scheduling of BSSs can then be obtained by a genetic algorithm (GA) based method. Test results demonstrate the validity of the proposed mathematical model and optimal charging/discharging scheduling for BSSs. [ABSTRACT FROM PUBLISHER]

A direct approach for unbalanced three-phase distribution load flow solutions is proposed in this paper. The special topological characteristics of distribution networks have been fully utilized to make the direct solution possible. Two developed matrices—the bus-injection to branch-current matrix and the branch-current to bus-voltage matrix— and a simple matrix multiplication are used to obtain load flow solutions. Due to the distinctive solution techniques of the proposed method, the time-consuming LU decomposition and forward/backward substitution of the Jacobian matrix or Y admittance matrix required in the traditional load flow methods are no longer necessary. Therefore, the proposed method is robust and time-efficient. Test results demonstrate the validity of the proposed method. The proposed method shows great potential to be used in distribution automation applications. [ABSTRACT FROM AUTHOR]