Search

In this study, a minimizing inverter capacity design is proposed, and the characteristics and performance of static VAR compensator (SVC) coupling hybrid active power filters (SVC-HAPFs) are analyzed. The cost of the SVC part is much lower than that of the active inverter part, and thus, the reduction of inverter part capacity can lead to a decrease in the total cost of SVC-HAPF. To demonstrate the advantages of the proposed minimizing inverter capacity design of SVC-HAPF, comparisons are given between the conventional and the proposed SVC-HAPF designs. Comparisons are also provided among active power filters (APFs), HAPFs, and the proposed SVC-HAPF in terms of dc-link voltage, compensation range, and performance. Finally, simulation and laboratory-scale experimental results are given to validate the minimizing inverter capacity design, and to verify the characteristics and compensation performances of APF, HAPF, and the proposed SVC-HAPF. [ABSTRACT FROM AUTHOR]

When the load generated harmonic, unbalanced, and reactive power is beyond the limited capacity of a thyristor-controlled LC-coupling hybrid active power filter (TCLC-HAPF), the TCLC-HAPF with the conventional control methods cannot provide satisfactory compensation performance. In this paper, a selective compensation control method of harmonic distortion, unbalanced and reactive power of the TCLC-HAPF is proposed, which can function even at different voltage conditions (e.g., voltage dip, voltage fault, etc.). First, the proposed control method decomposes the load power into fundamental positive-sequence reactive power, fundamental negative-sequence power (unbalanced power), and harmonic power. Then, the decomposed reactive, unbalanced, and harmonic power can be selectively or fully compensated based on the capacity of the TCLC-HAPF. Finally, simulation and experimental results are provided to verify the effectiveness of the proposed selective compensation control method for the TCLC-HAPF. [ABSTRACT FROM PUBLISHER]

In this paper, a new modeling and parameter design method for the thyristor-controlled LC-coupled hybrid active power filter (TCLC-HAPF) is proposed, which includes the analysis of the inner flowed three-phase unbalanced power during unbalanced condition. Different from the conventional method which ignores the inner flowed three-phase unbalanced power, the proposed design method can achieve better performance during unbalanced compensation. To verify the validity and advantages of the proposed modeling and parameter design method of TCLC-HAPF, the mathematical analysis, representative simulation and experimental results for compensating different unbalanced loading situation are presented in comparison with the conventional design method. [ABSTRACT FROM PUBLISHER]

This paper proposes an adaptive low-dc-link-voltage-controlled LC coupling hybrid active power filter (LC-HAPF) with a neutral inductor, which can compensate both dynamic reactive power and current harmonics in three-phase four-wire distribution power systems. Due to its adaptive low-dc-link-voltage characteristic, it can obtain the least switching loss and switching noise and the best compensating performances, compared with the conventional fixed and newly adaptive dc-voltage-controlled LC-HAPFs. The design procedures of the dc-link voltage controller are discussed, so that the proportional and integral gains can be designed accordingly. Moreover, the general design procedures for the adaptive dc-voltage-controlled LC-HAPF with a neutral inductor are also given. The validity and effectiveness of the adaptive dc-link voltage-controlled LC -HAPF with a neutral inductor are confirmed by experimental results obtained from a 220-V 10-kVA laboratory prototype compared with the conventional fixed and adaptive dc-link voltage-controlled LC-HAPFs without a neutral inductor. [ABSTRACT FROM AUTHOR]

In this article, a vector proportional–integral (VPI) current controller for the LC-coupling hybrid active power (LC-HAPF) with ideally zero steady-state error, optimal transient response, and good robustness is proposed. First, the transfer function of the proposed VPI current controller is introduced, and its parameter design for obtaining optimal transient response is discussed. Second, a detailed robustness analysis of the VPI current controller, including the system parameter variation, distorted grid voltage, and grid frequency variation conditions, is proposed. Third, the digital implementation method of the VPI controller and an overall control block diagram for the LC-HAPF with the proposed VPI current controller are presented. Moreover, a comparative study and analysis between the VPI current controller and the other representative current controllers under the minimum dc-link voltage is discussed in which the VPI current controller obtains the best performances under the minimum dc-link voltage operation. The simulation and experimental results are provided to verify the advantages and effectiveness of the proposed VPI current controller for a three-phase four-wire LC-HAPF in comparison with the other representative current controllers under different dc-link voltage conditions. Finally, the robustness under different grid conditions and unbalanced compensation capability of the proposed VPI-controlled LC-HAPF are also verified by the experimental results. [ABSTRACT FROM AUTHOR]

In this paper, the structure, modeling, parameter design, and control method are proposed for a new hybrid structure of a static var compensator in parallel with a hybrid active power filter (SVC//HAPF). The SVC part of the SVC//HAPF is used to dynamically compensate the reactive power. And, the HAPF part is used to provide harmonic power and small amount of reactive power compensation. Due to the large fundamental voltage drop on coupling the LC part, the active inverter part of the SVC//HAPF has low voltage rating. Meanwhile, the parallel-connected SVC acts as a current divider to reduce the active inverter current. Therefore, the proposed SVC//HAPF shows the great promise in compensating harmonic current and wide-range reactive power with a low (both) voltage and current rating active inverter part. To show the advantages of the proposed SVC//HAPF, simulation comparisons among the active power filter (APF), HAPF, SVC in series with HAPF (SVC−HAPF), and the proposed SVC//HAPF are provided. Finally, experimental results based on the laboratory-scaled hardware prototype are given to show the validity of the SVC//HAPF. [ABSTRACT FROM PUBLISHER]

Single-phase traction transformers are widely used in traction power supply systems due to their characteristics such as a low cost and a simple structure. Railway power conditioners (RPCs) could increase the loading capacity of substations and improve the supply quality. In this paper, a hybrid RPC (HRPC) is applied to reduce reactive power, relieve system unbalance, and suppress harmonics. The operational voltage of the HRPC is much lower than that of a conventional RPC. A method named partial compensation was used to reduce the current rating of the RPC, in which the compensating currents are expressed as a function of the power factor target at the grid side. When this method is used in the HPRC, the operational voltage varies with the compensating currents over a wide range. A comprehensive design procedure is proposed so that both the current and voltage ratings of the HRPC are reduced with partial compensation. A reduction of more than 50% is achieved by compensating the power factor at the grid side to 0.95 instead of to unity. The control block diagram for the HRPC with partial compensation is presented. The design and control of the HRPC are validated by simulation and experimental results. [ABSTRACT FROM PUBLISHER]

Compared with the conventional active power filter, the thyristor-controlled LC-coupling hybrid active power filter (TCLC-HAPF) has a distinct characteristics of low dc-link operating voltage, which can lower the system and operational costs in the medium-voltage-level system. It also has a wider operational range than the conventional hybrid active power filter. Besides that, the TCLC-HAPF can provide reactive, harmonic, and unbalanced powers compensation simultaneously. In this article, the modeling of the TCLC-HAPF is investigated based on the linear control aspect. Then, the analysis, design, and implementation of a multi-quasi-proportional-resonant (MQPR) controller with gain scheduling for the TCLC-HAPF will be proposed, which can automatically change the resonant gain between the inductive and capacitive loads operation to improve its compensation performances. The proposed controller can significantly reduce the TCLC-HAPF steady-state current tracking errors and output current ripple. Finally, the simulation and experimental results are also provided to verify the effectiveness and performance of the MQPR controller for the TCLC-HAPF in comparison with the hysteresis current controller and quasi-proportional-resonant (QPR) controller, which shows superior compensating performances. [ABSTRACT FROM AUTHOR]