Search

Cellulose material is emerging as a promising alternative to polyolefin separators in lithium-ion batteries (LIBs) due to its wide availability, electrolyte wettability and thermal stability. Based on the non-solvent induced phase separation, dissolving and regenerating the cellulose material by environmentally friendly solvents and non-solvent enables the efficient and pollution-free preparation of porous regenerated cellulose separator (RCS), greatly expanding their application potential in LIBs. However, the mechanical strength of pure RCS still hardly satisfactory, due to the weak intermolecular bonding and loose porous structure. Therefore, this study introduced an acrylic acid/acrylamide (AA/AM) polymer cross-linking system forming an interpenetrating network with the cellulose framework to produce a double network regenerated cellulose separator (DN-RCS) with high mechanical strength and high porosity. At meantime, the special functional group on AA/AM can influence the transport process of Li + and PF 6 - in the electrolyte, helping to form a stable interface on the electrolyte/lithium anode surface to reduce the formation of lithium dendrites. The results showed that DN-RCS possessed excellent mechanical strength and porosity compared to RCS. The high ionic conductivity of DN-RCS (1.03 mS cm -1 ) enabled the assembled cell with excellent cycling stability (90.8 % at 0.5C for 100 cycles) and rate performance (65.2 % at 5C). This work provides a further feasible strategy for the preparation of a high-performance cellulose-based separator., Competing Interests: Declaration of competing interest There are no conflicts of interest to declare in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The high energy density and robust cycle properties of lithium-ion batteries contribute to their extensive range of applications. Polyolefin separators are often used for the purpose of storing electrolytes, hence ensuring the efficient internal ion transport. Nevertheless, the electrochemical performance of lithium-ion batteries is constrained by its limited interaction with electrolytes and poor capacity for cation transport. This work presents the preparation of a new bio-based nanofiber separator by combining oxidized lignin (OL) and halloysite nanotubes (HNTs) with polyimide (PI) using an electrospinning technique. Analysis was conducted to examine and compare the structure, morphology, thermal characteristics, and EIS of the separator with those of commercially available polypropylene separator (PP). The results indicate that the PI@OL and PI-OL@ 10 % HNTs separators exhibit higher lithium ion transference number and ionic conductivity. Moreover, the use of HNTs successfully impeded the proliferation of lithium dendrites, hence exerting a beneficial impact on both the cycle performance and multiplier performance of the battery. Consequently, after undergoing 300 iterations, the battery capacity of LiFePO 4 |PI-OL@ 10 % HNTs|Li stays at 92.1 %, surpassing that of PP (86.8 %) and PI@OL (89.6 %). These findings indicate that this new bio-based battery separator (PI-OL@HNTs) has the great potential to serve as a substitute for the commonly used PP separator in lithium metal batteries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The increasing amount of electric vehicles on our streets as well as the need to store surplus energy from renewable sources such as wind, solar and tidal parks, has brought small and large scale batteries into the focus of academic and industrial research. While there has been huge progress in performance and cost reduction in the past years, batteries and their components still face several environmental issues including safety, toxicity, recycling and sustainability. In this review, we address these challenges by showcasing the potential of polysaccharide-based compounds and materials used in batteries. This particularly involves their use as electrode binders, separators and gel/solid polymer electrolytes. The review contains a historical section on the different battery technologies, considerations about safety on batteries and requirements of polysaccharide components to be used in different types of battery technologies. The last sections cover opportunities for polysaccharides as well as obstacles that prevent their wider use in battery industry., (Copyright © 2021 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

A series of monobenzoporphyrins (WH1-WH4) bearing different conjugated spacer groups were designed and synthesized as sensitizers for dye-sensitized solar cells. Although a phenyl spacer only has a minimal impact on the absorption bands of the monobenzoporphyrin, an ethynylphenyl (WH3) or a vinyl (WH4) spacer redshifts and broadens the absorption bands of the dyes to result in much enhanced light-harvesting ability. Dye-sensitized solar cells based on these monobenzoporphyrin dyes displayed remarkable differences in power conversion efficiencies (PCEs). The monobenzoporphyrin bearing no spacer (WH1) resulted in a PCE of only 0.5 %; in contrast, the monobenzoporphyrin bearing vinyl spacers (WH4) achieved a PCE of 5.2 %. The high efficiency of the WH4 cell is attributed to the higher light-harvesting ability, the lesser extent of aggregation on the TiO2 surface, and the more favorable electron-density distributions of the HOMO and LUMO for electron injection and collection. This work demonstrates the exceptional tunability of benzoporphyrins as sensitizers for dye-sensitized solar cells., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)