Search

The measurement of water inside a transformer is essential to maintain its reliable operation, as the water content can increase as the transformer ages. This measurement is frequently performed by a utility as a part of its periodic maintenance activities. In this paper, the application of optical fiber sensors as an online method to measure water content of paper inside an operating transformer is presented. There are several advantages of using these sensors, including their size, lightweight, flexibility, multiplexing, no-electromagnetic interference, etc. A unique benefit of fiber optic technology is that sensors can be embedded into the winding structure and operate in areas of high electric field strength. For this work, fiber optic water and temperature sensors are investigated by comparing their measurements to a commercial water activity probe immersed in oil. The study found that the determination of water content by fiber optic sensors compared closely with other techniques, which lead to the conclusion that they can be an effective technology for water measurement in an operational transformer. [ABSTRACT FROM AUTHOR]

Vibration measurement has been adopted in some utilities in Australia, Canada, and several European countries for online condition monitoring of the power transformer's onload tap changer (OLTC). By comparing measured vibration signals at different stages, it might be possible to assess changes of OLTC's condition. However, there are still considerable difficulties in correlating vibration signals to the events of OLTC operation, which may impair the capability of vibration measurement for OLTC condition monitoring. Therefore, arcing measurement is proposed in this paper to complement the vibration measurement. Arcing is provoked when the OLTC switching contact closes at a fixed tap position and can lead to electromagnetic signals flowing through transformer windings, finally reaching earth. The arcing measurement is achieved by using a high-frequency current transducer (HFCT) clamping on the transformer's grounding cable. The joint vibration and arcing measurement can provide a better means for interpreting events involved in OLTC operation and facilitating improved OLTC condition monitoring. Since HFCT measured arcing signals can be coupled with noise, a probabilistic wavelet transform is thus employed in this paper to extract arcing signals from noise. Field measurements on two different types of OLTCs are performed using the joint vibration and arcing measurement system to validate the proposed methodology. [ABSTRACT FROM PUBLISHER]

This paper proposes an inductively active filtering (IAF) method to comprehensively improve the power quality (PQ) for not only the distribution network (public grid) but also the power-supply system (nonlinear load) connected to the network. At first, a new main-circuit topology for implementing the IAF method is presented, which consists of an inductively filtered transformer and a fully tuned branch controlled by an inverter. Its operating principle and technical features are introduced by comparing with the traditional active filtering method. Based on this, the equivalent circuit is established and by means of mathematical modeling, the unique filtering mechanism of the IAF method is revealed in theory. Further, the control strategy of the FT branch and the impedance coordination for the inductively filtered transformer are designed based on theoretical analysis. A case study is investigated in detail to illustrate the operating characteristics of the IAF method. Both the theoretical and the case studies show that the IAF method can effectively prevent harmonic components from flowing into the primary (grid) winding of the transformer. Since the harmonic components are suppressed near the harmonic source, it is good for the power-supply system and especially good for the converter transformer. Besides, since the harmonic flow is limited to near the harmonic source, the PQ of the public network can be guaranteed completely. [ABSTRACT FROM AUTHOR]

This paper presents a review of the time-domain polarization measurement techniques for the condition assessment of aged transformer insulation. The polarization process is first described with appropriate dielectric response theories and then commonly used polarization methods are described with special emphasis on the most widely used "return voltage" (rv) measurement. Most recent emphasis has been directed to techniques of determining moisture content of insulation indirectly by measuring rv parameters. The major difficulty still lies with the accurate interpretation of return voltage results. This paper investigates different thoughts regarding the interpretation of rv results for different moisture and ageing conditions. Other time domain polarization measurement techniques and their results are also presented in this paper. [ABSTRACT FROM AUTHOR]

This paper describes the investigation of the insulation condition of a number of power and distribution type transformers of different manufacturing dates and with different operating histories. Return voltage measurements were conducted for these transformers. Effects of moisture and aging on the oilpaper insulation of these transformers were investigated and results are presented in this paper. Moisture in oil samples at known temperature was measured for these transformers. Previously accelerated aging experiments were performed on paper wrapped insulated conductors in different environments over a temperature range of 115 to 145°C. Results from the measurements on transformers are compared with those of the accelerated aged samples and are described in this paper. [ABSTRACT FROM AUTHOR]