Search

This paper reports a novel oscillator circuit topology based on a transformer-coupled p-network. As a case study, the proposed oscillator topology has been designed and studied for 60 GHz applications in the frame of the emerging fifth generation wireless communications. The analytical expression of the oscillation frequency is derived and validated through circuit simulations. The root-locus analysis shows that oscillations occur only at that resonant frequency of the LC tank. Moreover, a closed-form expression for the quality factor (Q) of the LC tank is derived which shows the enhancement of the equivalent quality factor of the LC tank due to the transformer-coupling. Last, a phase noise analysis is reported and the analytical expressions of phase noise due to flicker and thermal noise sources are derived and validated by the results obtained through SpectreRF simulations in the Cadence design environment with a 28 nm CMOS process design kit commercially available. [ABSTRACT FROM AUTHOR]

This paper presents a 67GHz LC oscillator exploiting a three-spiral transformer and implemented in 65nm bulk complementary metal-oxide-semiconductor technology by STMicroelectronics. The three-spiral transformer allows operating with a lower voltage supply, still obtaining good phase noise performance, and achieving a compact design. Measured performances when supplied with 1.2 V are: oscillation frequency of 67 GHz, phase noise ( PN) equal to −96 dBc/Hz at 1 MHz frequency offset from the carrier, power consumption ( PC) equal to 19.2 mW and figure of merit ( FOM) equal to −179.7 dB/Hz. Measured performances when supplied with 0.6 V are: oscillation frequency of 67 GHz; PN equal to −88.7 dBc/Hz at a 1 MHz frequency offset from the carrier; PC equal to 3.6 mW and FOM equal to −179.7 dB/Hz. Copyright © 2016 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

The design of modern radiofrequency integrated circuits on silicon operating at microwave and millimeterwaves requires the integration of several spiral inductors and transformers that are not commonly available in the process design-kits of the technologies. In this work we present an auxiliary CAD tool for Microwave Inductor (and transformer) Design Automation on Silicon (MIDAS) that exploits commercial simulators and allows the implementation of an automatic design flow, including threedimensional layout editing and electromagnetic simulations. In detail, MIDAS allows the designer to derive a preliminary sizing of the inductor (transformer) on the bases of the design entries (specifications). It draws the inductor (transformer) layers for the specific process design kit, including vias and underpasses, with or without patterned ground shield, and launches the electromagnetic simulations, achieving effective design automation with respect to the traditional design flow for RFICs. With the present software suite the complete design time is reduced significantly (typically 1 hour on a PC based on Intel® Pentium® Dual 1.80 GHz CPU with 2-GB RAM). Afterwards both the device equivalent circuit and the layout are ready to be imported in the Cadence environment. [ABSTRACT FROM AUTHOR]