Search

The magnetic coupler is the most vital component for charging EV wirelessly. Through it, the output power can be transported from the transmitter to the receiver by means of electromagnetic fields. Therefore, this manuscript presents a proposed design of a magnetic coupler in the form of Double-D (DD) on both sides, which is suitable for in-motion inductive charging. This charger is capable of transferring power of 200-kW through an airgap of 250 mm with an efficiency of 91.88% and an operating frequency of 85 kHz. Computational modeling is conducted to obtain the magnetic coupler and the compensation parameters of the proposed system. The appropriate dimensions of the coils, magnetic and metallic shielding are obtained by using the finite element model (FEM). The effect of misalignments on the self and mutual inductances of the two coils (Lp, Ls, M), the output power (Po), and the transmission efficiency (η) is studied in case of one and two coils at transmitter side. The output power in the distance between the two transmitter coils (d) is improved by controlling the operating frequency, adding magnetizable concrete (MC), or both together. These techniques have proven effectiveness in improving the output power by 45.15% for small d and 72.51% for large d. In addition, the efficiency improved by 15.95% for small d and 60.76% for large d. Moreover, these improvement cases were compared in terms of size, weight and cost for a 100-m driving track. [ABSTRACT FROM AUTHOR]

Inductive power transfer (IPT) technology is a promising solution for charging the electric vehicles (EVs) by enabling an EV to charge its energy storage system (battery) without any connecting wires through magnetic coupling. This paper proposes a new receiver design named Hollow Solenoid receiver that is compatible with the standard double-D transmitter defined by the SAE J2954 standard. A deep design analysis for the proposed Hollow Solenoid receiver is presented to define the optimum design parameters for coil (inductances, number of turns, dimensions, wires, etc.) and ferrite core (dimensions, number, arrangement, etc.). Several WPT3 (11.1kVA) solenoid receiver (SR) designs were presented and analyzed based on efficiency, weight, size, volume, and cost. The performance of the proposed SR was compared with the global Double-D receiver (DDR) presented by the SAE J2954 standard under different lateral and rotational alignment and loading conditions considering coupling factor, transmission power and efficiency, and stray electromagnetic fields (EMFs). The entire IPT system including coils, compensation network, power converters, controls, and battery load was modeled and analyzed for both SR and DDR coils. The results reveal that the proposed SR is compatible with the global DD transmitter at different alignment and loading conditions and is able to transmit the desired power (11 kW) at an efficiency > 85%. Hollow SR design shows the highest efficiency and lowest size, weight, and cost compared to DDR and other designs. [ABSTRACT FROM AUTHOR]

The proper magnetic design is one of the most difficult and critical phases in developing an inductive power transfer system, especially for electric vehicle charging. In this communication, a fast and an efficient improved Tabu search algorithm coupled with 2-D finite-element analysis (FEA) was used to determine the optimum design parameters of power pads. A two-objective optimization problem was investigated considering the magnetic coupling, misalignment (horizontal, vertical, and rotational), as well as the cost. The double-D power pad structure was considered as a case of study, and the most effective design parameters were obtained. The 2-D FEA was utilized to calculate the coupling factor at different misalignment conditions. For verification purposes, the system coupling performance and cost are analyzed using the optimum design parameters and compared with three other designs presented in the literature. The proposed optimized design shows the best coupling performance with moderate cost. The results proved the validity and advantages of the proposed design methodology. [ABSTRACT FROM AUTHOR]

This paper proposes a simple single-phase new pulse-width modulated seven-level inverter architecture for photovoltaic (PV) systems supporting home-grid with electric vehicle (EV) charging port. The proposed inverter includes a reduced number of power components and passive elements size, while showing less output-voltage total harmonic distortion (THD), and unity power factor operation. In addition, the proposed inverter requires simple control and switching strategies compared to recently published topologies. A comparative study was performed to compare the proposed inverter structure with the recent inverter topologies based on the number of components in the inverter circuit, number of components per output-voltage level, average number of active switches, THD, and operating efficiency as effective parameters for inverter performance evaluation. For design and validation purposes, numerical and analytical models for a grid-tied solar PV system driven by the proposed seven-level inverter were developed in MATLAB/Simulink environment. The inverter performance was evaluated considering grid-integration and stand-alone home with level-2 AC EV charger (3–6 kW). Compared with recently published topologies, the proposed inverter utilizes a reduced number of power components (7 switches) for seven-level terminal voltage synthesis. An experimental prototype for proposed inverter with the associated controller was built and tested for a stand-alone and grid-integrated system. Due to the lower number of ON-switches, the inverter operating efficiency was enhanced to 92.86% with load current THD of 3.43% that follows the IEEE standards for DER applications. [ABSTRACT FROM AUTHOR]