Search

Summary: The magnetic couplers play an important role in electric vehicle (EV) wireless power transfer (WPT) systems. Conversational coupling structures are mainly based on unipolar, bipolar, and quadrupole coils, and the interoperability among them cannot be achieved. To solve the interoperability problem in the coupling structure, a novel bipolar coil structure is proposed in this paper. Energy transfer with unipolar and bipolar coils is achieved by interconnecting unipolar and bipolar types crosswise in the same plane and combining them with the corresponding topologies. They are connected in series on the dc side. An experimental prototype is built to verify the interoperability performance of the proposed novel bipolar coil structure. The proposed novel bipolar coil structure can be compatible with unipolar, bipolar, and quadrupole coils and achieve a maximum dc‐dc efficiency of more than 85%. [ABSTRACT FROM AUTHOR]

A substantial interest in inductive power transfer (IPT) is due to its straight forwardness and dependability in charging electric vehicle (EV) batteries for researchers. The mutual inductance (MI) plays a critical role in the IPT system as it enables efficient power transfer. Therefore, it is imperative to examine the MI between the two coils that are connected through inductive coupling. This work investigates the MI and efficiency of connected coils in interoperable conditions. The transmitter coil is arranged in the shape of a square (TxS), whereas the reception coil is arranged in the shape of a circle (RxC). A concise and user‐friendly collection of design guidelines for S‐S compensated resonant inductive power transfer (SS‐RIPT) systems the design concepts efficiently mitigate the possibility of systematically and unambiguously setting the specifications for a given load profile. A 3.6‐kW setup has been constructed and validated by finite element analysis and experimental testing, following the design specifications. The availability of suitable testing equipment in the laboratory influenced the choice of a resonance frequency and output voltage for a 3.6 kW system. [ABSTRACT FROM AUTHOR]

In the realm of wireless power transfer, considering misalignment between transmitting and receiving coils is imperative. Traditional wireless power transfer systems experience a significant decrease in output power when the coupling coefficient fluctuates. This paper proposes a reconfigurable dual‐frequency series–series (SS) topology with primary side inductive detuned and secondary side with full resonance. The proposed topology operates at two frequencies and can be transformed into two different SS topologies at each frequency. This allows the system to switch between the two SS topologies when a large misalignment occurs, thereby achieving a more stable output power level. Furthermore, a comprehensive parameter design flowchart for the proposed topology is presented, and the parameters for a 400 W prototype are designed and implemented. The prototype is tested to evaluate the performance of the topology. The frequency response analysis of the prototype validates the effectiveness of the parameter design method. The test results show that the topology can maintain output power fluctuations within 23% of the maximum power for misalignment ranging from k = 0.13 to k = 0.46. Additionally, the system maintains an efficiency of at least 80% across the entire output power flat range, peaking at a maximum efficiency of 91%. [ABSTRACT FROM AUTHOR]

This study proposes a novel approach for selecting the resonance capacitance of wireless power transfer systems, aiming to achieve a zero phase angle (ZPA) while simultaneously minimizing the leakage magnetic field. The performance of the method is validated across two key topologies: series–series (S–S or SS) and the double-sided inductor–capacitor–capacitor (LCC, LCC–LCC) topologies. By minimizing the vector phasor sum of the coil currents, the proposed approach effectively mitigates magnetic field leakage. The method is further validated through mathematical derivations, simulations, and experimental tests. The results reveal that using the proposed method to select resonance capacitances reduces the leakage magnetic field by up to 35.2% in the SS topology and by 42.0% in the double-sided LCC topology. Furthermore, the method improves the ZPA by more than 20° in both cases. These outcomes affirm the effectiveness of the proposed resonance tuning approach. [ABSTRACT FROM AUTHOR]

Capacitive power transfer (CPT) has emerged as a promising alternative to traditional inductive methods. CPT offers advantages like cost‐effectiveness, reduced weight and volume, and greater tolerance to alignment errors. However, the high‐Q resonant circuits used as matching networks can be susceptible to high voltage stress, especially when transmitting substantial power. Consequently, designing matching networks for CPT systems necessitates consideration of multiple parameters, including practical constraints such as component losses and breakdown thresholds. In this work an innovative algorithm is presented for designing practical matching networks in CPT systems. The algorithm conducts a methodical search of potential solutions, and converges on component values that maximize power transfer efficiency whilst also minimizing component voltage stress. The proposed algorithm is demonstrated theoretically and experimentally. [ABSTRACT FROM AUTHOR]

The growing adoption of electric vehicles (EVs) and advancements in dynamic wireless charging (DWC) technology have strengthened the interdependence between power distribution networks (PDNs) and electrified transportation networks (ETNs), leading to the emergence of coupled power and transportation energy systems (CPTESs). This development introduces new challenges, particularly as DWC technology shifts EV charging demand from residential plug-in charging to charging-while-driving during commuting hours, causing simultaneous congestion in both ETNs and PDNs during peak times. The present work addresses this issue by developing a collaborative optimization framework for CPTESs that incorporates integrated demand responses (IDRs) and EVs battery state-of-charge (SOC). In the ETN, a multiperiod traffic assignment model with time-shiftable traffic demands (MTA-TSTD) is established to optimize travelers' routes and departure times while capturing traffic flow distribution. Meanwhile, effective path generation models with EVs battery SOC are proposed to optimize charging energy during driving and construct the effective path sets for MTA-TSTD. In the PDN, a multiperiod optimal power flow model with time-shiftable power demands (MOPF-TSPD) is formulated to schedule local generators and flexible power demands while calculating the power flow distribution. To enhance temporal and spatial coordination in CPTESs, a distributed coordinated operation model considering IDRs is proposed, aiming to optimize energy consumption, alleviate congestion, and ensure system safety. Finally, an adaptive effective path generation algorithm and an ETN–PDN interaction algorithm are devised to efficiently solve these models. Numerical results on two test systems validate the effectiveness of the proposed models and algorithms. [ABSTRACT FROM AUTHOR]

The high adoption of electric vehicles (EVs) and the rising need for charging power in recent years calls for advancing charging service infrastructures and assessing the readiness of the power system to cope with such infrastructures. This paper proposes a novel model for the integrated operation of dynamic wireless charging (DWC) and power distribution systems offering charging service to in‐motion EVs. The proposed model benefits from a hierarchical design, where DWC controllers capture the traffic flows of in‐motion EVs on different routes and translate them into estimations of charging power requests on power distribution system nodes. The charging power requests are then communicated with a central controller that monitors the distribution system operation by enforcing an optimal power flow model. This controller coordinates the operation of distributed energy resources to leverage charging power delivery to in‐motion EVs and mitigate stress on the distribution system operation. The proposed model is tested on a test distribution system connected to multiple DWC systems in Salt Lake City, and the findings demonstrate its efficiency in quantifying the traffic flow of in‐motion EVs and its translation to charging power requests while highlighting the role of distributed energy resources in alleviating stress on the distribution system operation. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to solve the problem that both the speed and the required driving power of electric vehicles (EVs) will change during the dynamic wireless charging (DWC) process, making it difficult to charge EVs with a constant power considering the overall efficiency of DWC system, the numbers of EVs and the power supply capacity. Therefore, this paper proposes the power control and efficiency optimization strategies for multiple EVs. Design/methodology/approach: The wireless power charging system for multiple loads with a structure of double-sided LCC compensation topology is established. The expressions of optimal transmission efficiency and optimal equivalent impedance are derived. Taking the Tesla Model 3 as an example, a method to determine the number of EVs allowed by one transmitter coil and the overall charging power is proposed considering EV speed, power supply capacity, safe braking distance and overall efficiency. Then, the power control strategy, which can adapt to the changes of EV speed and the efficiency optimization strategy under different numbers of EVs are proposed. Findings: In this paper, a method to determine the numbers of EVs allowed by one transmitter coil and the overall charging power is proposed considering EVs speed, power supply capacity, safe braking distance and overall efficiency. The accuracy of the charging power is good enough and the overall efficiency reaches a maximum of 91.79% when the load resistance changes from 5Ω to 20Ω. Originality/value: In this paper, the power control and efficiency optimization strategy of DWC system for multiple EVs are proposed. Specifically, a method of designing the number of EVs and charging power allowed by one transmitter coil considering the factors of EV speed, power supply capacity, safe braking distance and overall efficiency is designed. The overall efficiency of the experiment reaches a maximum of 91.79% after adopting the optimization strategy. [ABSTRACT FROM AUTHOR]

Wireless power transfer (WPT) system is gaining prominence for charging various applications, including electric vehicles, biomedical implants, smartphones, and network sensors. Efficient compensation networks are essential to minimize leakage inductance. The performances of singleelement compensation topologies are compared based on different coupling and loading conditions, revealing that series-series (SS) and series-parallel (SP) topologies exhibit lower peak efficiencies of 85% and 90%, respectively, than parallel-series (PS) and parallel-parallel (PP) topologies, having 99% and 98.5% peak efficiency, respectively; with efficiencies deteriorating under different loading and coupling conditions. To address these shortcomings, a hybrid inductor-capacitor capacitor (LC-S) compensation topology is proposed, outperforming the single element topologies and maintaining over 95% efficiency under varying loading and coupling conditions. A slight efficiency drop to 82% due to frequency splitting was observed with low load resistance. In terms of the output characteristics, the LC-S topology achieved 1.2 W. These results showcase the potential of the LC-S topology for enhancing WPT system efficiency. [ABSTRACT FROM AUTHOR]

This paper aims to improve the efficiency, affordability, and safety of Wireless Power Transfer (WPT) devices. While wireless inductive charging is common in devices like smartphones, charging electric vehicles presents significant challenges due to high frequency electromagnetic fields that can be dangerous for users and those nearby. Current systems are expensive due to the use of specialized materials and components. By developing WPT systems with drastically reduced frequency levels, this research has the potential to significantly impact the widespread adoption of affordable, safe, and efficient WPT devices for high-power applications like electric vehicle charging. In fact, using lower frequencies allows us to build WPT systems with far less expensive materials, e.g. no need of Litz wires and ferrites that can be replaced by single core copper wires and classical magnetic steels. The effectiveness of the method is demonstrated through simulation using MATLAB Simulink® and experimental tests. The results indicate that it is possible to maintain good performance, reduce limitations and costs, and improve user acceptance of WPT systems by considerably lowering the frequency of electromagnetic fields that are classically used in such systems. [ABSTRACT FROM AUTHOR]

Scholars and practitioners believe that the large-scale deployment of charging piles is imperative to our future electric transportation systems. Major economies ambitiously install charging pile networks, with massive construction spending, maintenance costs, and urban space occupation. However, recent developments in technology may significantly reduce the necessary charging capacity required by the system. This paper develops a linear programming model to characterize the effects of likely scenarios where vehicle-to-vehicle (V2V) charging is available via vehicle modularization or wireless charging. Specifically, we consider scenarios in which vehicles can transmit energy to each other (coordinated by a central platform) while traveling closely on the same road. We first estimate the number of charging piles needed for completing the travel plan of 73 cars from data, assuming a battery capacity of 400 km's range and no V2V charging. Our results show that once V2V charging technologies with an efficiency of 50% are available, more than 2/3 of the charging piles investment would be wasted. Additionally, if the efficiency of V2V charging increases to 75%, we can easily reduce the battery capacity of vehicles to 200 km, which will reduce production costs and improve energy efficiency. These results may reveal us an alternative pathway towards transportation electrification. [ABSTRACT FROM AUTHOR]

To address the dual problems of fuel reliance and air pollution, this study describes the design of a wireless ground to vehicle charging system powered by solar energy and specifically designed for electric vehicle (EV) charging stations. As the number of electric vehicles on the road steadily rises, they present a viable way to cut travel expenses by switching from conventional fuel to electricity, which is a more economical and sustainable option. With the introduction of a wireless EV charging system, this creative solution does away with the need for external power sources and permits continuous charging without interfering with driving. Utilizing solar power, the charging system incorporates solar panels, batteries, circuit regulators, boost converters, receiver and transmitter copper coils, AC/DC converters, microcontrollers (such as ATmega), LCD screens, and circuit regulators. This study describes a technique that shows that charging electric cars while driving is feasible and eliminates the need to stop. This technology for wireless solar electric vehicle charging presents a forward-thinking approach to sustainable mobility by providing a workable solution that can be easily included in the road infrastructure. For the wireless charging, in addition, various coil designs are suggested. [ABSTRACT FROM AUTHOR]

This investigation is part of a topical situation where wireless equipment is gradually being used for energy transfer, particularly for autonomous systems and the use of decarbonized energies. A characteristic example of decarbonized autonomous use is linked to the substitution of thermal engine vehicles for electric vehicles (EVs) equipped with energy storage batteries. This response was considered in an ecological context of reducing air pollution and defending planetary biodiversity, which are currently vital. These EVs ultimately operate thanks to the wireless charging of their batteries when stationary or running. By changing long-established means of transport that have become a threat to biodiversity, it is necessary to ensure that innovative replacement solutions protect this biodiversity. In addition, the construction of wireless power transfer (WPT) battery chargers for these EVs must offer an optimal ecology of clean energy saving. In such a context, the two concepts of One Health (OH) and Responsible Attitude (RA) will find their place in the design and control of WPT tools in EVs. This contribution aims to illustrate and analyze the roles of the green and non-wasteful OH and RA approaches in the design and control of WPT embedded in EVs for the smart city (SC) environment. In the paper, WPT tools are first introduced. The design and control of EV battery charging tools are then examined. The biological effects on living tissues due to the electromagnetic field (EMF) radiation of WPT are analyzed. The phenomena and equations governing the design of WPT and the effects of EMF radiation are then exposed. The OH and RA approaches in the SC context are afterward analyzed. The protection against the unsafe effects of WPT tools in the SC environment is consequently explored. The analyses followed in the paper are supported by examples from the literature. The explorations proposed in this contribution have made it possible to highlight certain notions, allowing a more in-depth understanding of the use of EVs with WPT rechargeable batteries for SCs. Thus, the analysis and fusion of these topics are at the heart of this contribution. [ABSTRACT FROM AUTHOR]

This paper deals with the mitigation of magnetic field levels produced by a wireless power transfer (WPT) system to recharge the battery of an electric vehicle (EV). In this work, an array of active coils surrounding the WPT coils is proposed as a mitigation technique. The theory and new methodological aspects are the focus of the paper. Magnetic field levels in the environment are calculated numerically without and with the presence of an array of active coils in a stationary WPT system for automotive applications. By the proposed mitigation method, the field levels beside the vehicle are significantly reduced and comply with the reference levels (RLs) of the ICNIRP 2010 guidelines for human exposure to electromagnetic fields and the magnetic flux density limits proposed by ISO 14117 for electromagnetic interference (EMI) in cardiac implantable electronic devices (CIEDs). [ABSTRACT FROM AUTHOR]

The DWCS (dynamic wireless charging system) is an innovative electric vehicle charging solution that allows for charging while the vehicle is in motion without requiring direct physical contact. This groundbreaking technology has the capacity to significantly reduce the size of electric vehicle batteries and improve battery life if the DWCS is installed correctly along the route. However, using smaller batteries and improving battery life requires more DWCS stations to be installed along the route. This becomes more challenging due to the heterogeneity of battery vehicles, making finding the optimal compromise between batteries cost and charging infrastructure cost complex since each type has unique characteristics. To address this challenge, we present a quantitative analysis of the benefits of dynamic charging using a mathematical model that considers both batteries and charging infrastructure costs, considering the heterogeneity and life of battery vehicles. Our analysis focuses on identifying how much batteries cost can be reduced to decrease system costs while demonstrating the benefits of dynamic charging on battery life. In the resolution stage, we have created an innovative approach that utilizes multi-agent systems and reinforcement learning, explicitly Q-learning, within the framework of distributed artificial intelligence. [ABSTRACT FROM AUTHOR]

Copyright of Automobile Technology is the property of Automobile Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

For a segmented dynamic wireless power transfer (DWPT) system, when electric vehicles (EVs) move over two adjacent transmitting coils, the received power fluctuates greatly and has some loss. Arming at this problem, this paper proposes a dual receiver segmented DWPT topology to reduce the received power fluctuation of the receiving coil passing through the rail junction during the moving process of the EV. Through magnetic field analysis in this paper, tuning the current phase difference between two adjacent transmitting coils to 180° can enhance the magnetic field. In this paper, a dual receiver series topology (DRST) is designed to pick up power, which consists of four fully controlled components and four diodes. According to EVs' real-time position, the segment DWPT system has three working modes and six working states under the control of DRST. Finally, experiments are carried out. Compared to the single-receiving-coil system, DRST is effective in improving the average output power from 2.007 to 5.657 W and significantly reducing the power fluctuation. [ABSTRACT FROM AUTHOR]

The design and integration of intelligent energy management systems in hybrid electric vehicle (EV) charging stations, leveraging industry 4.0 and renewable energy sources, is crucial for advancing sustainability, efficiency, and technological development. The innovative hybrid EV charging station described in this study uses a combination of fuel cells, batteries, and solar panels that run at 14 amps a piece at 240 volts. The system consists of five essential components that work together to transfer power wirelessly: an EV battery bank, a boost converter, an HF inverter, transfer coils, and a power supply. Two crucial phases make up the optimization process. In phase 1, the boost converter's maximum power point is tracked and optimized to generate the most power possible by varying the duty cycle between 10% and 90%. In phase 2, the HF uses a class ϕ2 inverter at 30 MHz to synchronize with the resonant frequency of wireless power transfer coils. Zero-voltage switching is used by a digital signal processor card to carry out control for effective operations. By utilizing hybrid sources to optimize power transmission, this design improves the sustainability of EV charging options. [ABSTRACT FROM AUTHOR]

This paper presents an advanced Wireless Power Transfer (WPT) system for electric vehicles (EVs) featuring Active Load Impedance Matching (ALIM) at the rectification stage. Unlike traditional synchronous rectification, ALIM dynamically adjusts load impedance, optimizing energy transfer efficiency and reducing thermal stresses, system costs, and mass. The system incorporates two circuits optimized for distinct frequency bands: one operates below 10 kHz using standard copper wiring for cost-effectiveness, and the other at 85 kHz, which significantly reduces the mass of the onboard coil and magnetic circuit while ensuring interoperability according to SAE J2954 standard. Our approach enhances charging efficiency across various operating conditions, improves thermal management, and minimizes maintenance costs. Additionally, it enables partial compensation for vehicle misalignment and ground assembly impedance, further boosting efficiency and interoperability. Experimental results demonstrate a notable increase in efficiency and reduction in system mass, confirming the superiority of the ALIM-equipped WPT system over conventional solutions. This paper underscores the potential of ALIM to advance the scalability, efficiency, and economic viability of wireless EV charging technology, promoting broader adoption and sustainability in EV infrastructures. By providing a comprehensive solution that addresses key challenges in wireless charging, our work paves the way for more efficient and cost-effective EV charging systems. [ABSTRACT FROM AUTHOR]

Wireless charging technology provides a convenient and safe method for electric vehicles. To meet the needs of commercial operations, it is essential to accurately measure the active power at the transmitter end of the wireless charging system. However, due to the high-frequency and high-voltage, measuring the voltage at the transmitting coil is challenging. In response to this issue, this paper focuses on the bilateral LCC compensation network and analyzes the harmonic components of the current and voltage at transmitting coil. It derives the voltage relationship between compensation capacitor and the transmitting coil and indirectly measure voltage at transmitting coil, finally proposing an active power calculation method for the transmitting coil. An experimental prototype of a wireless charging system utilizing bilateral LCC compensation is built. Simulations and experiments verify that the active power consumed by the transmitting coil is mainly the fundamental component, and the impact of the sampling frequencies and power levels on the measurement accuracy is discussed. [ABSTRACT FROM AUTHOR]

The fundamentals of wireless power transmission began with Nikola Tesla, who used a Tesla coil to transmit energy wirelessly. These studies have paved the way for today's wireless power transmission technologies. In recent years, wireless power transmission has also garnered attention from phone companies and is now being considered for use in electric vehicles. One of the main reasons lithium-ion batteries are preferred in electric vehicles is the ease of charging. These batteries provide longer range compared to other types of batteries due to their high energy density, meaning they can store more energy relative to their size. Additionally, their faster charging capabilities are a major advantage for electric vehicle owners. As a result, charging technology is of great importance for electric vehicles. In this study, a design is presented that allows electric vehicles, which are becoming more common in daily life due to advancing technology, to wirelessly transfer charge to each other in emergency situations. In the design, the receiving coil is placed in the front hood of the vehicle, and the transmitting coil is placed in the rear hood, with the model being configured accordingly. The design also allows the location of the transmitting coil to be adjusted via distance sensors. When electric vehicles reach the optimum distance, the distance sensor gives an alert, allowing enough charge to be transferred for the vehicle to reach the nearest charging station. Additionally, the system can be designed to allow emergency vehicles (such as ambulances) to quickly receive energy from another vehicle in emergencies, due to the ease of sharing provided by the system. This system reduces the towing costs of electric and hybrid vehicles and offers drivers uninterrupted driving. Furthermore, the system provides numerous advantages such as eliminating cable clutter, offering ease of use, compatibility with all devices, multi-charging capability, and durability. [ABSTRACT FROM AUTHOR]

Background: Wireless Power Transfer is becoming more and more popular in electric vehicle (EV) charging systems. Without any mechanical contact, wireless power transfer can provide energy transmission from the power source to the load in application situations like "park and charge" and "move and charge.". Methods: This study investigates the effects of various inductive power transfer (IPT) coupler geometries on performance. It considers four possible coupler topologies: circular, rectangular, double-D (DD), and double-D-quadrature receiver (DD-Q). We have made a comparison between these different coupler topologies, according to this comparison, we have found that DD and DDQ have the best performance, but this article aims to use coils that have good performance and cost, for this reason, we have designed these rectangular and circular coils on ANSYS Maxwell to test their performances, because, they are the cheapest using less materials to construct them. Results: The simulation results help us to visualize that the performance of the rectangular coil is better than that of the circular coil. Conclusion: Finally, after choosing the coil that has the best performance, it is possible to install this coil on the ground of the road to power the battery of the electric vehicle. [ABSTRACT FROM AUTHOR]

The shift towards cars electric vehicle (EVs) plays a role in the global effort to combat climate change by reducing dependence on fossil fuels. An important part of this shift involves creating user EV charging systems. This study looks into how a connected coil design in a wireless power transfer system can help overcome challenges in EV charging when dealing with varying loads. We examine how well the system performs under load resistances that mimic states of charge and battery capacities in EVs. By assessing the stability of output voltage and efficiency of power transfer across these loads we focus on maintaining resonance within the system. Our findings show that the LCCL to LC WPT system maintains efficiency in power transfer 50-94% when coupling coefficient change (0-0.9) at load resistance 3 ꭥ and stable output voltage when facing changes in load resistance 1-4.5 ꭥ. This suggests that the system is resilient against load variations, which's crucial for real world EV charging situations. This research supports the potential of WPT systems as an efficient solution to meet the evolving demands of EV infrastructure leading towards increased adoption of EVs and a sustainable future for transportation. [ABSTRACT FROM AUTHOR]

The growing demand for Electric Vehicles (EVs) necessitates the advancement of efficient charging systems. While dynamic charging models exhibit superior efficiency in Wireless Power Transfer (WPT) systems compared to static charging, however, the inherent challenges impede the effective operation of EV charging. This research aims to effectively address the existing research gap causing coil misalignment and sub-optimal efficiency in wireless charging systems for EVs by proposing a circuit design integrating an enhanced LCC compensation topology specifically tailored for wireless charging systems. The key innovation lies in the inclusion of a dual transmitter winding which optimizes power transmission between receiver and transmitter coils while ensuring high efficiency. The duo transmitter winding is split into sub windings one connected to the inverter and the other left open which further enhances performance, enabling operation under higher misalignment conditions while maintaining elevated efficiency levels. The advantage of both open and closed inductance in the circuit configuration significantly improves performance, overcoming previous constraints and providing a more robust and reliable charging solution. The circuit design implements Zero Voltage Switching (ZVS) to minimize energy losses in the Snubber MOSFET capacitance, typically used as a switch. Additionally, a ZVS feedback mechanism is incorporated to dynamically adjust the series capacitor on the receiver side, suggesting the presence of a resonant circuit. This approach aims to optimize the switching characteristics of the MOSFET, reduce losses, and enhance the overall efficiency of the power electronic system, potentially for applications such as wireless power transfer or power supplies. By enhancing the effectiveness and reliability of wireless power transfer in EVs, this study contributes to advancing the ease and feasibility of charging electric vehicles, potentially revolutionizing the EV industry's charging infrastructure. [ABSTRACT FROM AUTHOR]

Copyright of Automotive Digest is the property of Automotive Digest Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The editorial discusses the advancements, applications, and future outlook of Wireless Power Transfer (WPT) technology. It highlights the significance of WPT in various industries, such as consumer electronics, automotive, healthcare, and Internet of Things (IoT). The editorial also addresses challenges in WPT, including efficiency, electromagnetic interference, and regulatory issues, while exploring future directions in materials, renewable energy integration, and artificial intelligence optimization. Overall, WPT technology is seen as a transformative solution with the potential to drive innovation and create a more connected, sustainable, and energy-efficient world. [Extracted from the article]

Resonant inductive‐based wireless power transfer (WPT) for battery charging has potential applications in electric vehicles (EVs). The EV battery charging process requires the regulation of both charging voltage and current. Duty ratio or frequency control is generally preferred to manage the power flow between the transmitter and receiver coils in the WPT system. In the case of WPT charging, misalignment between the coils and parameter variations are unavoidable issues that result in changes to the output power. Therefore, it is essential to control the power flow to maintain constant current (CC) and constant voltage (CV) modes during battery charging. To address these challenges, various primary‐side control techniques, such as asymmetric clamped mode (ACM), asymmetric duty cycle (ADC), and phase‐shift (PS) fixed frequency control strategies, have been proposed for WPT systems. This paper conducts a comparative analysis of these control methods, considering their output voltage ranges and their ability to maintain zero‐voltage switching (ZVS) for the entire control range. Furthermore, the paper presents a generalized design for reduced‐order small signal modelling, utilizing an extended describing function. The designed controller, based on small signal modelling, will undergo real‐time testing to evaluate its dynamic performance in the series‐series resonant converter. [ABSTRACT FROM AUTHOR]

Wireless charging of Electric Vehicles (EVs) has been extensively researched in the realm of electric cars, offering a convenient method. Nonetheless, there has been a scarcity of experiments conducted on low-power electric vehicles. To establish a wireless power transfer system for an electric vehicle, optimal power and transmission efficiency necessitate arranging the coils coaxially. In wireless charging systems, coils often experience angular and lateral misalignments. In this paper, a new alignment strategy is introduced to tackle the misalignment problem between the transmitter and receiver coils in the wireless charging of Electric Vehicles (EVs). The study involves the design and analysis of a coil, considering factors such as mutual inductance and efficiency. Wireless coils with angular misalignment are modelled in Ansys Maxwell simulation software. The proposed practical EV system aims to align the coils using angular motion, effectively reducing misalignment during the parking of two-wheelers. This is achieved by tilting the transmitter coil in the desired direction. Furthermore, micro sensing coils are employed to identify misalignment and facilitate automatic alignment. Additionally, adopting a power control technique becomes essential to achieve both constant current (CC) and constant voltage (CV) modes during battery charging. Integrating CC and CV modes is crucial for efficiently charging lithium-ion batteries, ensuring prolonged lifespan and optimal capacity utilization. The developed system can improve the efficiency of the wireless charging system to 90.3% with a 24 V, 16 Ah Lithium Ion Phosphate (LiFePO4) battery at a 160 mm distance between the coils. [ABSTRACT FROM AUTHOR]

Introduction: The rapid development of electric vehicle technology in the field of renewable energy has brought significant challenges to wireless charging systems. The efficiency of these systems is crucial for improving availability and sustainability. The main focus of the research is to develop an intelligent charging strategy that utilizes fuzzy logic to optimize the efficiency of wireless charging systems for electric vehicles. Method: Introduce a model that combines fuzzy logic algorithm with automatic control system to improve the wireless charging process of electric vehicles. The model adopts dynamic tracking and adaptive control methods by analyzing the characteristics of static wireless charging systems. Utilizing primary phase shift control and secondary controllable rectifier regulation, combined with optimized fuzzy control algorithm. Result and discussion: The experimental results show that when the secondary coil is stable, the model maintains a stable duty cycle of about 75.6% and a stable current of 5A. It was observed that when the mutual inductance values were set to 10, 15, and 20 uH, the efficiency of the primary coil before applying control decreased with increasing resistance. Conclusion: The proposed system has shown great potential for application in real-world electric vehicle charging systems, demonstrating good applicability and feasibility in controlling the charging process and tracking the optimal efficiency point. The integration of fuzzy logic enhances the system's ability to adapt to different operating conditions, which may lead to wider implementation and improved operational efficiency. [ABSTRACT FROM AUTHOR]

This study focuses on stabilizing a bidirectional inductive wireless power transfer (WPT) system using an event‐triggered approach. It is only assumed the inductor currents on both the primary and pickup sides are measurable, and they are sent synchronously to the controller via a digital channel. To estimate the unmeasured states and maintain plant stability, a full‐order state observer and an observer‐based controller have been developed. The control parameters are optimized through a genetic algorithm to achieve the desired output response. An emulation methodology is then applied to create an output‐based event‐triggering condition. This condition ensures the stability of the closed‐loop system even in the presence of communication constraints. To prevent Zeno sampling, a minimal time interval between two transmissions is enforced using time‐regularization techniques. Furthermore, the performance of the event‐triggered controller is enhanced by solving a linear matrix inequality condition, which further reduces the number of transmission instances. The methodology offers a systematic and optimal design for the bidirectional inductive WPT system. It eliminates the need for manual tuning of control parameters, which is particularly beneficial given the system's complex nature. To address both continuous‐time and discrete‐time dynamics, the entire system is represented as a hybrid dynamical system, making it more intuitive for networked control systems. The efficiency of this approach is assessed through numerical simulations of a WPT system, demonstrating its effectiveness. The results show that the average intertransmission interval has been increased from 0.0799 to 0.1782 s, that is, the proposed event‐triggering strategy reduced the number of transmissions to more than 50% compared with conventional periodic sampling. [ABSTRACT FROM AUTHOR]

Electric vehicle (EV) fast charging systems are rapidly evolving to meet the demands of a growing electric mobility landscape. This paper provides a comprehensive overview of various fast charging techniques, advanced infrastructure, control strategies, and emerging challenges and future trends in EV fast charging. It discusses various fast charging techniques, including inductive charging, ultra-fast charging (UFC), DC fast charging (DCFC), Tesla Superchargers, bidirectional charging integration, and battery swapping, analysing their advantages and limitations. Advanced infrastructure for DC fast charging is explored, covering charging standards, connector types, communication protocols, power levels, and charging modes control strategies. Electric vehicle battery chargers are categorized into on-board and off-board systems, with detailed functionalities provided. The status of DC fast charging station DC-DC converters classification is presented, emphasizing their role in optimizing charging efficiency. Control strategies for EV systems are analysed, focusing on effective charging management while ensuring safety and performance. Challenges and future trends in EV fast charging are thoroughly explored, highlighting infrastructure limitations, standardization efforts, battery technology advancements, and energy optimization through smart grid solutions and bidirectional chargers. The paper advocates for global collaboration to establish universal standards and interoperability among charging systems to facilitate widespread EV adoption. Future research areas include faster charging, infrastructure improvements, standardization, and energy optimization. Encouragement is given for advancements in battery technology, wireless charging, battery swapping, and user experience enhancement to further advance the EV fast charging ecosystem. In summary, this paper offers valuable insights into the current state, challenges, and future directions of EV fast charging, providing a comprehensive examination of technological advancements and emerging trends in the field. [ABSTRACT FROM AUTHOR]

The seamless adoption of electric vehicles (EVs) in the United States necessitates the development of extensive and effective charging infrastructure. Various charging systems have been proposed, including Direct Current Fast Charging, Battery Swapping, and Dynamic Wireless Power Transfer. While many studies have evaluated the charging costs and greenhouse gas (GHG) intensity of EVs, a comprehensive analysis comparing these systems and their implications across vehicle categories remains unexplored. This study compares the total cost of ownership (TCO) and GHG-intensity of EVs using these charging systems. Based on nationwide infrastructure deployment simulations, the change to TCO from adopting EVs varies by scenario, vehicle category, and location, with local fuel prices, electricity prices, and traffic volumes dramatically impacting results. Further, EV GHG-intensity depends on local electricity mixes and infrastructure utilizations. This research highlights the responsiveness of EV benefits resulting from technology advancements, deployment decisions, and policymaking. Results show meaningful variations in electric vehicle costs and emissions benefits across the United States, differing by vehicle category and charging systems: Direct Current Fast Charging, Battery Swapping, and Dynamic Wireless Power Transfer. [ABSTRACT FROM AUTHOR]

This paper addresses the control task of a wireless power transfer (WPT) charger designed for electric vehicles (EVs). The challenge is to maintain a constant battery charging current when the WPT is controlled on the ground side. Indeed, the intermittent latency involved in the wireless data communication between the ground and vehicle sides leads to system instability. To overcome this issue, a new control approach has been proposed in this paper. The proposed technique ensures indirect control of the battery charging current through control of the current on the ground side. The control technique relies on an adaptive hill-climbing algorithm in conjunction with a PI-based controller. The adaptive parameter is adjusted online, during the operation of the charger, only when a new measure of the battery charging current is received on the primary side. This makes it possible to avoid the need for real-time wireless data communication. It should be noted that this aspect is crucial in ensuring the controller's robustness and stability of the system regardless of potential delays in wireless communication and large misalignments between the coils. The validity of the proposed control technique has been confirmed through simulation. In addition, experimental validation, using a laboratory test bed, demonstrated satisfactory results. [ABSTRACT FROM AUTHOR]

When an inductive power transfer (IPT) system conducts wireless charging for electric cars, the coupling coefficient between the coils is easily affected by fluctuations in the external environment. With frequent changes in the battery load impedance, it is difficult for the IPT system to achieve constant-voltage and constant-current (CVCC) controls. A CVCC control method is proposed for the IPT system that has a double-sided LCC compensation structure based on full-bridge synchronous rectification. The proposed method achieved good dynamic stability and was able to effectively switch between the output current and voltage of the system by adjusting only the duty cycle of the switch on the secondary side of the rectification bridge. As a result, the system efficiency was improved. The output characteristics of the double-sided LCC compensation structure was derived and the conduction condition with zero voltage was analyzed by using four switches through two conduction time series of the rectifier circuit. Then, the output voltage of the synchronized rectifier was derived. The hardware implementation of the full-bridge controllable rectifier was described in detail. Finally, a MATLAB/Simulink 2018a simulation model was developed and applied to an 11 kW prototype to analyze and validate the design. The results showed that the designed system had good CVCC output characteristics and could maintain constant output under certain coupling offsets. Compared with semi synchronous rectification methods, the proposed method had a higher efficiency, which was 95.6% at the rated load. [ABSTRACT FROM AUTHOR]

Nowadays business has shifted from product-centric to customer-centric due to the industrial revolution. As a result, the customer's problem and experience need to be studied and inspected thoroughly to find solutions. Charging stations implementing different charging technologies are reinforced in various topographical locations. Varied charging methods, including AC slow charging, AC fast charging, DC level 1 charging, DC level 2 charging, wireless charging is implemented so far to reduce the charging time. Various business models are established and reported by researchers to support the EV ecosystem. This paper presents one such business model for an electric vehicle (EV) charging system. Design Thinking is one of the problem-solving approaches discussed here. How to tackle the charging issues by implementing different technologies is also discussed. Different phases of Design Thinking are used to find the possible solution to the problems faced by customers. Different groups of customers' problems and how the proposed solution can fulfil a major group of customers' needs are discussed here. [ABSTRACT FROM AUTHOR]

In the context of inductive power transfer (IPT) for electric vehicle (EV) charging, the precise determination of the mutual inductance between the magnetic pads is of critical importance. The value of this inductance varies depending on the EV positioning, affecting the power transfer capability. Therefore, the precise determination of its value yields various advantages, particularly by contributing to the optimization of the charging process of the EV batteries, since it offers the possibility of adjusting the position of the vehicle depending on the level of misalignment. Within this framework, algorithms grounded in artificial intelligence (AI) techniques emerge as promising solutions. This research work revolves around the estimation of the mutual inductance in a wireless inductive power transfer system using a resonant converter topology, implemented in MATLAB/Simulink® R2021b. The system output was developed to emulate the behavior of a battery charger. To estimate this parameter, an artificial neural network (ANN) was developed. Given the characteristics of the system, the features were chosen in a way that they could provide a clear indication to the ANN if the vehicle position changed, independently of the charging power. In the pursuit of creating a robust AI model, the training dataset contained approximately 1% of the available data. Upon the analysis of the results, it was verified that the largest estimation error observed was around 3%, occurring at the lowest charging power considered. Hence, it can be inferred that the proposed ANN exhibits the capability to accurately estimate the value of mutual inductance in this type of system. [ABSTRACT FROM AUTHOR]

Dynamic wireless charging (DWC) has emerged as a viable approach to mitigate range anxiety by ensuring continuous and uninterrupted charging for electric vehicles in motion. DWC systems rely on the length of the transmitter, which can be categorized into long-track transmitters and segmented coil arrays. The segmented coil array, favored for its heightened efficiency and reduced electromagnetic interference, stands out as the preferred option. However, in such DWC systems, the need arises to detect the vehicle's position, specifically to activate the transmitter coils aligned with the receiver pad and de-energize uncoupled transmitter coils. This paper introduces various machine learning algorithms for precise vehicle position determination, accommodating diverse ground clearances of electric vehicles and various speeds. Through testing eight different machine learning algorithms and comparing the results, the random forest algorithm emerged as superior, displaying the lowest error in predicting the actual position. [ABSTRACT FROM AUTHOR]

• Structural equation modeling approach to analyze EV users' decision-making process. • Acceptability of dynamic wireless charging facilities influenced by latent factors. • User's acceptance and latent constructs are mediated by the intention to use. • Urban users are more likely to adopt DWC technology compared to rural users. • EV experience strengthens the relationship between perceived usefulness and users' intention. Gaining insights into how users perceive dynamic wireless charging (DWC), also known as dynamic wireless power transfer (DWPT), technology for electric vehicle charging is crucial for developing effective measures and policies for its successful integration into the transportation network. This research paper presents a study conducted in New Zealand using an online stated preference survey and employing a structural equation modelling approach. The study investigates users' intention and acceptance of DWC technology, considering various latent factors, while incorporating attributes related to technology acceptance and the theory of planned behaviour in the modelling framework. The findings reveal that perceived concern negatively influences users' intention to use DWC facilities, while perceived usefulness in terms of ease of use and convenience, as well as environmental awareness and social norms, positively impact users' intention. These results offer valuable insights for devising strategies to enhance the acceptance of DWC technology in the future. [ABSTRACT FROM AUTHOR]

In recent years, wireless charging technology for electric vehicles has gained significant attention. To accurately analyze the distribution characteristics of the electromagnetic field during the wireless charging process of electric vehicles, a finite element-based electromagnetic analysis method was employed. Applied in the commercial simulation software, the electromagnetic environment of the resonant coil and electric vehicle model was simulated under high-power charging conditions, resulting in an overall electromagnetic field distribution for the electric vehicle. The results indicated that within the coil region, the magnetic induction intensity in the central area of the coil was zero, and it increased as the distance from the center of the coil grew. Outside the coil region, the magnetic induction intensity gradually decreased. The electric field intensity of the resonant coil was maximum in the central area of the coil, and it weakened as the distance from the center of the coil increased. When a magnetic shielding resonant coil was used, the electromagnetic field was confined between the shielding materials, and the magnetic field rapidly attenuated on both sides of the magnetic shield. The electromagnetic field energy of the electric vehicle body was mainly concentrated at the bottom of the vehicle near the coil. When the coil was located in the front of the car body, the maximum electric field intensity distribution in the car body was 8.50 V/m, and the maximum magnetic induction intensity was 0.024 μ T. When the coil was located in the middle of the car body, the maximum electric field intensity was 2.31 V/m, the maximum magnetic induction intensity was 0.019 μ T. As the distance from the coil position increased, the energy weakened. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to solve the problem of high output voltage fluctuation and low efficiency caused by the misalignment of the magnetic coupling structure in the wireless charging system for electric vehicles. To address these issues, this paper proposes a dual LCC-S wireless power transfer (WPT) system based on the double-D double-layer quadrature (DDDQ) coil, which can realize the anti-misalignment constant voltage output of the system. Design/methodology/approach: First, this paper establishes the equivalent circuit of a WPT system based on dual LCC-S compensation topology and analyzes its constant-voltage output characteristics and the relationship between system transmission efficiency and coupling coefficient. 1. Quadruple D (Ahmad et al., 2019) and double-D quadrature pad (DDQP) (Chen et al., 2019) coils have good anti-misalignment in the transverse and longitudinal directions, but the magnetic induction intensity in the center of the coils is weak, making it difficult for the receiving coil to effectively couple to the magnetic field energy. 2. Based on the double-D quadrature (DDQ) structure coil that can eliminate the mutual inductance between coupling coils and cross-coupling, Gong et al. (2022a) proposed a parameter optimized LCC-LC series-parallel hybrid topology circuit, which ensures that the output current fluctuation is controlled within 5% only when the system is misaligned within the 50% range along the X direction, achieving constant current output with anti-misalignment. The magnetic coupling structure's finite element simulation model is established to analyze the change in magnetic induction intensity and the system's anti-misalignment characteristics when the coil offsets along the x and y axes. Finally, an experimental prototype is developed to verify the constant voltage output performance and anti-misalignment performance of the system, and the proposed anti-misalignment system is compared with the systems in existing literature, highlighting the advantages of this design. Findings: The experimental results show that the system can achieve a constant voltage output of 48V under a time-varying load, and the output voltage fluctuates within ±5% of the set value within the range of ±60 mm lateral misalignment and ±72 mm longitudinal misalignment. Originality/value: Based on the dual LCC-S WPT system, the mutual inductance between the same side coils is reduced by adding decoupling coils, and the anti-misalignment characteristics and output power of the system are improved in a certain range. It is aimed at improving the stability of the system output and transmission efficiency. [ABSTRACT FROM AUTHOR]

The studies on Wireless Power Transfer (WPT) technology and peripherals in Electric Vehicle (EV) applications are intensifying. While the energy received from the WPT system is transferred to the EV battery, the direct current (dc)/dc converter circuits are used. The dc/dc buck converter topologies are one of them. The converter circuits must be highly efficient, lightweight, and compact to have a high range in EV vehicles. There are asynchronous buck, synchronous buck, and interleaved synchronous buck converter circuit topologies from the literature. In this study, the efficiency results of these circuit topologies were analyzed using MATLAB/Simulink and experimental studies. This study contributes to the literature by conducting circuit-level efficiency analysis and component-level power loss analysis. It has been observed that the interleaved synchronous buck converter circuit operates at 99% efficiency at 1066 W. In addition, it has been shared with the oscilloscope results that the current ripples of this circuit topology are lower than other circuit converters. Specifically, there has been a significant reduction of 56% in power losses, particularly in the interleaved synchronous buck converter (ISBC). This study analyzes the dynamic behavior of the dc/dc buck converter topologies, and results about their performance are given. [ABSTRACT FROM AUTHOR]

Wireless power transfer (WPT) via magnetic resonance offers efficient electrical power transfer, making it an increasingly attractive option for charging electric vehicles (EVs) without conventional plugs. However, EV charging requires a transfer power in order of kW or higher, resulting in a higher-leaked magnetic field than conventional wireless systems. The leaked magnetic field is nonuniform, and the assessment in terms of the limit prescribed in the guideline is highly conservative because it assumes that a person standing in free space is exposed to a uniform field. In such cases, an assessment should be performed using the limits of the internal electric field, as it is more relevant to the adverse health effects, whereas its evaluation is time-consuming. To mitigate this over-conservativeness, international product standards introduce a spatial averaging method for nonuniform exposure assessment. In this study, we investigate assessment methods, especially for measurement points of nonuniform magnetic field strength leaked from the WPT system. Various spatial averaging methods are correlated with the internal electric field derived from electromagnetic field analysis using an anatomically based human body model. Our computational results confirm a good correlation between the spatially averaged magnetic and internal electric fields. Additionally, these methods provide an appropriate compliance assessment with the exposure guidelines. This study advances our understanding of the suitability of spatial averaging methods for nonuniform exposure and contributes to the smooth assessment in WPT systems. [ABSTRACT FROM AUTHOR]

In challenging operational environments such as underground buildings beneath roadways, reliability and performance of wireless power transfer (WPT) systems for electric vehicles (EVs) heavily hinge on the operating temperature of the magnetic couplers. Addressing this, this study introduces a novel approach employing heat sink and thermoelectric cooler technologies to mitigate temperature rise in magnetic couplers, which is particularly crucial for high-power applications. Utilizing ANSYS simulation, the study evaluates a WPT high-power application coil model with a total output power of 2 KW and an 18 cm air gap, with a 3.5 cm adjacent alignment to enhance thermal performance on both transmitter and receiver sides. Results demonstrate significant thermal enhancement, reducing the temperature of coils from 63 ℃ to 54 ℃ solely with the heat sink and further down to 48 ℃ with the combined implementation of both heat sink and thermoelectric cooler. These measures effectively dissipate heat from the coils into the surrounding air, ensuring system efficiency and stability while facilitating functionality of system components. [ABSTRACT FROM AUTHOR]

The three-phase voltage type Pulse Width Modulation (PWM) rectifier is widely used in the front-end power factor of electric vehicle wireless charging systems due to its simple control structure and easy implementation. The system often adopts a double closed-loop PI control method based on voltage and current, which inevitably leads to a significant starting current surge and poses significant risks to the safe operation of the equipment. On the basis of establishing a mathematical model for PWM rectifiers, this article analyzes in detail the causes of starting over-current and designs a starting strategy with a voltage outer proportional and integral separated active current directly given. Simulation experiments show that this method can reduce the starting over-current of PWM rectifiers and the excessive DC voltage surge towards normal operation during the starting process. [ABSTRACT FROM AUTHOR]

Recently, demand for electric vehicles has been increasing as a countermeasure against global warming, but they currently face many problems compared to gasoline-powered vehicles. For example, charging takes time, and there are few places where electric vehicles can be charged. If AC power supplies that can transfer energy to electric vehicles wirelessly exist under the lanes where electric vehicles drive, the cruising range will be increased. In this study, assuming wireless power transfer to a moving electric vehicle, an experiment was conducted to light up a light-emitting diode (LED) on a moving electric model car. To improve the efficiency of transfer, the optimal frequency for the position of the electric model car was calculated, and the value was fed back to the power supply to adjust the frequency in real time. [ABSTRACT FROM AUTHOR]