Search

Plasma arc welding (PAW)-cable-type seven-wire GMAW (gas metal arc welding) hybrid welding is known as a high-efficiency welding combining plasma arc, GMAW arc and cable-type welding wire. In this study, numerical simulation via Fluent of the molten pool temperature field and flow field and experimental verification were conducted on Q235 thin plate hybrid welding with cable-type wire to explore molten pool fluid behavior. The simulation results show that keyholes form in the molten pool due to the strong penetration ability of a plasma arc and then the evolved pores by the surface tension float out of the molten pool. When the GMAW welding current increases, both the length and width of the weld pool enlarge, the weld reinforcement increases and the flow rate of molten metal in the weld pool also speeds up. While the PAW current increases, the weld pool length also increases and the molten metal in the weld pool significantly flows faster, but the weld reinforcement decreases. When the welding speed increases, the weld pool length and fusion depth decrease, but the reinforcement will first increase and then decrease. The experimental results are in strong agreement with the simulation results. It shows that the numerical analysis model established in this paper is accurate, laying a certain theoretical foundation for the popularization of PAW-cable-type seven-wire GMAW hybrid welding. [ABSTRACT FROM AUTHOR]

A three-dimensional numerical model of double-arc in tandem gas metal arc welding (GMAW) was established based on the theory of arc physics, momentum equation, energy equation, continuous equation and Maxwell equations. The effects of different welding current on temperature field, velocity field and pressure field on the surface of workpieces were investigated. The results showed that the maximum values of arc temperature, arc plasma velocity and arc pressure on workpieces surface were increased with the increasing welding current. These maximum values occurred at the tip of double-wire. The current density and axial deflection angle of coupling arc were increased following the increasing welding current. [ABSTRACT FROM AUTHOR]

A cable-type welding wire (CWW) gas metal arc welding (GMAW) method was proposed as a novel approach, using CWW for the consumable electrode. Droplet transfer influences the welding process, and the forces on the droplet were analyzed to elucidate the metal transfer phenomenon observed during the welding process. The effects of the arc pressure, rotating force, and welding parameters were analyzed to understand the metal transfer. The special structure of the CWW affected the arc characteristics and forces during metal transfer as part of the welding process. The droplet formed by droplets from each thin wire, the arc, and electromagnetic forces on droplet formation and the coupling process were analyzed. The arc pressure and rotating forces are beneficial to metal transfer and increase the droplet transfer frequency. The droplet size decreases with increasing welding parameters. [ABSTRACT FROM AUTHOR]

• A numerical analysis model is developed for the arc of hybrid welding with T-joint. • The interaction behavior between arc and laser-induced metal vapor during welding process can be simulated. • Laser-induced metal vapor has a cooling effect on the arc. • The influence of laser rotation frequency on arc and laser-induced metal vapor is discussed. • The influence of laser rotation radius on arc and laser-induced metal vapor is discussed. In order to improve the reliability and stability of complex joints hybrid welding, this paper establishes an arc numerical analysis model, studies the T-joint high-frequency rotating laser-GMAW hybrid welding arc physical characteristics, and expounds the effects of laser rotation frequency along with rotation radius on arc plasma temperature, velocity, and metal vapor concentration field distribution. The research results show: the arc is more likely to start on the bottom plate and vertical plate surfaces, and the current density at the angle between the plates decreases significantly; temperature drops at the hybrid welding arc tail, the current effective distribution radius was reduced, and current density was more concentrated; the laser beam rotation frequency increases, the eruption speed of the metal vapor ejected from the keyhole decreases, while the meeting height of arc plasma and laser-induced metal vapor decreases; and, with an increase in rotation radius, the laser rotation speed increases accordingly. At the same rotation frequency, the injected metal vapor kinetic energy and rising height are reduced. [ABSTRACT FROM AUTHOR]