Search

The advent of Ultra-Reliable Low Latency Communication (URLLC) alongside the emergence of Open RAN (ORAN) architectures presents unprecedented challenges and opportunities in Radio Resource Management (RRM) for next-generation communication systems. This paper presents a comprehensive trade-off analysis of Deep Reinforcement Learning (DRL) approaches designed to enhance URLLC performance within ORAN's flexible and dynamic framework. By investigating various DRL strategies for optimising RRM parameters, we explore the intricate balance between reliability, latency, and the newfound adaptability afforded by ORAN principles. Through extensive simulation results, our study compares the efficacy of different DRL models in achieving URLLC objectives in an ORAN context, highlighting the potential of DRL to navigate the complexities introduced by ORAN. The proposed study provides valuable insights into the practical implementation of DRL-based RRM solutions in ORAN-enabled wireless networks. It sheds light on the benefits and challenges of integrating DRL and ORAN for URLLC enhancements. Our findings contribute to the ongoing discourse on advancements in URLLC and ORAN, offering a roadmap for future research to pursue efficient, reliable, and flexible communication systems., Comment: The manuscript is currently being reviewed by IEEE Communications Magazine

This paper presents the design and comprehensive measurements of a compact high-gain 32 element planar antenna array covering the n257 (26.5-29.5 GHz) millimeter wave (mmWave) band. First an 8-element quasi-uniform linear array is designed using a series-fed topology with fan shaped beams for point-to-multipoint connectivity followed by a compact corporate series feed network to design high-gain directive array for point-to-point connectivity. The radiation patterns of both antenna arrays in the azimuth and elevation planes are measured across a 180 degrees span using an over-the-air (OTA) compact antenna test range (CATR) system with a single rotary positioner. Moreover the procedure for quantifying and measuring the gain of mmWave antenna arrays is demonstrated in detail. The peak measured gain of the planar array is 18.45 dBi at 28.5 GHz while the half-power beamwidth of the planar array in the elevation and azimuth planes varies between 11 to 13 degrees, and 23-27 degrees respectively within the 26.5-29.5 GHz range. The measurement results match well with the simulations. The designed antenna array is suitable for various emerging 5G and beyond mmWave applications such as fixed wireless access, mmWave near-field focusing, high-resolution radar systems, and the characterization of mmWave path loss and channel sounding in diverse indoor environments and smart factories., Comment: 11 Pages, 15 Figues, Orignalsubmission

With the impending arrival of the sixth generation (6G) of wireless communication technology, the telecommunications landscape is poised for another revolutionary transformation. At the forefront of this evolution are intelligent meta-surfaces (IS), emerging as a disruptive physical layer technology with the potential to redefine the capabilities and performance metrics of future wireless networks. As 6G evolves from concept to reality, industry stakeholders, standards organizations, and regulatory bodies are collaborating to define the specifications, protocols, and interoperability standards governing IS deployment. Against this background, this article delves into the ongoing standardization efforts, emerging trends, potential opportunities, and prevailing challenges surrounding the integration of IS into the framework of 6G and beyond networks. Specifically, it provides a tutorial-style overview of recent advancements in IS and explores their potential applications within future networks beyond 6G. Additionally, the article identifies key challenges in the design and implementation of various types of intelligent surfaces, along with considerations for their practical standardization. Finally, it highlights potential future prospects in this evolving field.

Privacy, scalability, and reliability are significant challenges in unmanned aerial vehicle (UAV) networks as distributed systems, especially when employing machine learning (ML) technologies with substantial data exchange. Recently, the application of federated learning (FL) to UAV networks has improved collaboration, privacy, resilience, and adaptability, making it a promising framework for UAV applications. However, implementing FL for UAV networks introduces drawbacks such as communication overhead, synchronization issues, scalability limitations, and resource constraints. To address these challenges, this paper presents the Blockchain-enabled Clustered and Scalable Federated Learning (BCS-FL) framework for UAV networks. This improves the decentralization, coordination, scalability, and efficiency of FL in large-scale UAV networks. The framework partitions UAV networks into separate clusters, coordinated by cluster head UAVs (CHs), to establish a connected graph. Clustering enables efficient coordination of updates to the ML model. Additionally, hybrid inter-cluster and intra-cluster model aggregation schemes generate the global model after each training round, improving collaboration and knowledge sharing among clusters. The numerical findings illustrate the achievement of convergence while also emphasizing the trade-offs between the effectiveness of training and communication efficiency., Comment: 6 pages, 7 figures, 2023 IEEE International Workshop on Computer Aided Modeling and Design of Communication Links and Networks (IEEE CAMAD), Edinburgh UK

The future wireless communication applications demand seamless connectivity, higher throughput, and low latency, for which the millimeter-wave (mmWave) band is considered a potential technology. Nevertheless, line-of-sight (LoS) is often mandatory for mmWave band communication, and it renders these waves sensitive to sudden changes in the environment. Therefore, it is necessary to maintain the LoS link for a reliable connection. One such technique to maintain LoS is using proactive handover (HO). However, proactive HO is challenging, requiring continuous information about the surrounding wireless network to anticipate potential blockage. This paper presents a proactive blockage prediction mechanism where an unmanned aerial vehicle (UAV) is used as the base station for HO. The proposed scheme uses computer vision (CV) to obtain potential blocking objects, user speed, and location. To assess the effectiveness of the proposed scheme, the system is evaluated using a publicly available dataset for blockage prediction. The study integrates scenarios from Vision-based Wireless (ViWi) and UAV channel modeling, generating wireless data samples relevant to UAVs. The antenna modeling on the UAV end incorporates a polarization-matched scenario to optimize signal reception. The results demonstrate that UAV-assisted Handover not only ensures seamless connectivity but also enhances overall network performance by 20%. This research contributes to the advancement of proactive blockage mitigation strategies in wireless networks, showcasing the potential of UAVs as dynamic and adaptable base stations.

Generative artificial intelligence (GAI) has emerged as a rapidly burgeoning field demonstrating significant potential in creating diverse contents intelligently and automatically. To support such artificial intelligence-generated content (AIGC) services, future communication systems should fulfill much more stringent requirements (including data rate, throughput, latency, etc.) with limited yet precious spectrum resources. To tackle this challenge, semantic communication (SemCom), dramatically reducing resource consumption via extracting and transmitting semantics, has been deemed as a revolutionary communication scheme. The advanced GAI algorithms facilitate SemCom on sophisticated intelligence for model training, knowledge base construction and channel adaption. Furthermore, GAI algorithms also play an important role in the management of SemCom networks. In this survey, we first overview the basics of GAI and SemCom as well as the synergies of the two technologies. Especially, the GAI-driven SemCom framework is presented, where many GAI models for information creation, SemCom-enabled information transmission and information effectiveness for AIGC are discussed separately. We then delve into the GAI-driven SemCom network management involving with novel management layers, knowledge management, and resource allocation. Finally, we envision several promising use cases, i.e., autonomous driving, smart city, and the Metaverse for a more comprehensive exploration.

Semantic communication (SemCom) is expected to be a core paradigm in future communication networks, yielding significant benefits in terms of spectrum resource saving and information interaction efficiency. However, the existing SemCom structure is limited by the lack of context-reasoning ability and background knowledge provisioning, which, therefore, motivates us to seek the potential of incorporating generative artificial intelligence (GAI) technologies with SemCom. Recognizing GAI's powerful capability in automating and creating valuable, diverse, and personalized multimodal content, this article first highlights the principal characteristics of the combination of GAI and SemCom along with their pertinent benefits and challenges. To tackle these challenges, we further propose a novel GAI-integrated SemCom network (GAI-SCN) framework in a cloud-edge-mobile design. Specifically, by employing global and local GAI models, our GAI-SCN enables multimodal semantic content provisioning, semantic-level joint-source-channel coding, and AIGC acquisition to maximize the efficiency and reliability of semantic reasoning and resource utilization. Afterward, we present a detailed implementation workflow of GAI-SCN, followed by corresponding initial simulations for performance evaluation in comparison with two benchmarks. Finally, we discuss several open issues and offer feasible solutions to unlock the full potential of GAI-SCN., Comment: This article has been submitted to IEEE Wireless Communications Magazine for the third round of peer review after finishing the minor revision

Intelligent transportation systems increasingly depend on wireless communication, facilitating real-time vehicular communication. In this context, message authentication is crucial for establishing secure and reliable communication. However, security solutions must consider the dynamic nature of vehicular communication links, which fluctuate between line-of-sight (LoS) and non-line-of-sight (NLoS). In this paper, we propose a lightweight cross-layer authentication scheme that employs public-key infrastructure-based authentication for initial legitimacy detection while using keyed-based physical-layer re-authentication for message verification. However, the latter's detection probability (P_d) decreases with the reduction of the signal-to-noise ratio (SNR). Therefore, we examine using Reconfigurable Intelligent Surface (RIS) to enhance the SNR value directed toward the designated vehicle and consequently improve the P_d, especially for NLoS scenarios. We conducted theoretical analysis and practical implementation of the proposed scheme using a 1-bit RIS, consisting of 64 x 64 reflective units. Experimental results show a significant improvement in the P_d, increasing from 0.82 to 0.96 at SNR = - 6 dB for an orthogonal frequency division multiplexing system with 128 subcarriers. We also conducted informal and formal security analyses, using Burrows-Abadi-Needham (BAN)-logic, to prove the scheme's ability to resist passive and active attacks. Finally, the computation and communication comparisons demonstrate the superior performance of the proposed scheme compared to traditional crypto-based methods., Comment: 12 pages, 12 figures and 5 tables

Life on earth depends on healthy oceans, which supply a large percentage of the planet's oxygen, food, and energy. However, the oceans are under threat from climate change, which is devastating the marine ecosystem and the economic and social systems that depend on it. The Internet-of-underwater-things (IoUTs), a global interconnection of underwater objects, enables round-the-clock monitoring of the oceans. It provides high-resolution data for training machine learning (ML) algorithms for rapidly evaluating potential climate change solutions and speeding up decision-making. The sensors in conventional IoUTs are battery-powered, which limits their lifetime, and constitutes environmental hazards when they die. In this paper, we propose a sustainable scheme to improve the throughput and lifetime of underwater networks, enabling them to potentially operate indefinitely. The scheme is based on simultaneous wireless information and power transfer (SWIPT) from an autonomous underwater vehicle (AUV) used for data collection. We model the problem of jointly maximising throughput and harvested power as a Markov Decision Process (MDP), and develop a model-free reinforcement learning (RL) algorithm as a solution. The model's reward function incentivises the AUV to find optimal trajectories that maximise throughput and power transfer to the underwater nodes while minimising energy consumption. To the best of our knowledge, this is the first attempt at using RL to ensure sustainable underwater networks via SWIPT. The scheme is implemented in an open 3D RL environment specifically developed in MATLAB for this study. The performance results show up 207% improvement in energy efficiency compared to those of a random trajectory scheme used as a baseline model.

Virtual reality (VR) over wireless is expected to be one of the killer applications in next-generation communication networks. Nevertheless, the huge data volume along with stringent requirements on latency and reliability under limited bandwidth resources makes untethered wireless VR delivery increasingly challenging. Such bottlenecks, therefore, motivate this work to seek the potential of using semantic communication, a new paradigm that promises to significantly ease the resource pressure, for efficient VR delivery. To this end, we propose a novel framework, namely WIreless SEmantic deliveRy for VR (WiserVR), for delivering consecutive 360{\deg} video frames to VR users. Specifically, deep learning-based multiple modules are well-devised for the transceiver in WiserVR to realize high-performance feature extraction and semantic recovery. Among them, we dedicatedly develop a concept of semantic location graph and leverage the joint-semantic-channel-coding method with knowledge sharing to not only substantially reduce communication latency, but also to guarantee adequate transmission reliability and resilience under various channel states. Moreover, implementation of WiserVR is presented, followed by corresponding initial simulations for performance evaluation compared with benchmarks. Finally, we discuss several open issues and offer feasible solutions to unlock the full potential of WiserVR., Comment: This magazine article has been accepted for publication by IEEE Wireless Communications. Copyright may be transferred without notice, after which this version may no longer be accessible

In this paper, we model, analyze and optimize the multi-user and multi-order-reflection (MUMOR) intelligent reflecting surface (IRS) networks. We first derive a complete MUMOR IRS network model applicable for the arbitrary times of reflections, size and number of IRSs/reflectors. The optimal condition for achieving sum-rate upper bound with one IRS in a closed-form function and the analytical condition to achieve interference-free transmission are derived, respectively. Leveraging this optimal condition, we obtain the MUMOR sum-rate upper bound of the IRS network with different network topologies, where the linear graph (LG), complete graph (CG) and null graph (NG) topologies are considered. Simulation results verify our theories and derivations and demonstrate that the sum-rate upper bounds of different network topologies are under a K-fold improvement given K-piece IRS.

The upsurge in wireless devices and real-time service demands force the move to a higher frequency spectrum. Millimetre-wave (mmWave) and terahertz (THz) bands combined with the beamforming technology offer significant performance enhancements for ultra-dense networks (UDNs). Unfortunately, shrinking cell coverage and severe penetration loss experienced at higher spectrum render mobility management a critical issue in UDNs, especially optimizing beam blockages and frequent handover (HO). Mobility management challenges have become prevalent in city centres and urban areas. To address this, we propose a novel mechanism driven by exploiting wireless signals and on-road surveillance systems to intelligently predict possible blockages in advance and perform timely HO. This paper employs computer vision (CV) to determine obstacles and users' location and speed. In addition, this study introduces a new HO event, called block event {BLK}, defined by the presence of a blocking object and a user moving towards the blocked area. Moreover, the multivariate regression technique predicts the remaining time until the user reaches the blocked area, hence determining best HO decision. Compared to typical wireless networks without blockage prediction, simulation results show that our BLK detection and PHO algorithm achieves 40\% improvement in maintaining user connectivity and the required quality of experience (QoE).

The prosperity of artificial intelligence (AI) has laid a promising paradigm of communication system, i.e., intelligent semantic communication (ISC), where semantic contents, instead of traditional bit sequences, are coded by AI models for efficient communication. Due to the unique demand of background knowledge for semantic recovery, wireless resource management faces new challenges in ISC. In this paper, we address the user association (UA) and bandwidth allocation (BA) problems in an ISC-enabled heterogeneous network (ISC-HetNet). We first introduce the auxiliary knowledge base (KB) into the system model, and develop a new performance metric for the ISC-HetNet, named system throughput in message (STM). Joint optimization of UA and BA is then formulated with the aim of STM maximization subject to KB matching and wireless bandwidth constraints. To this end, we propose a two-stage solution, including a stochastic programming method in the first stage to obtain a deterministic objective with semantic confidence, and a heuristic algorithm in the second stage to reach the optimality of UA and BA. Numerical results show great superiority and reliability of our proposed solution on the STM performance when compared with two baseline algorithms., Comment: This work has been accepted for publication by 2022 IEEE International Conference on Computer Communications (INFOCOM). Copyright may be transferred without notice, after which this version may no longer be accessible

Fertility monitoring in humans for either natural conception or artificial insemination and fertilization has been a critical challenge both for the treating physician and the treated patients. Eggs in human female can be fertilized when they reach the Fallopian tube from the upper parts of the reproductive system. However, no technology, till date, on its own could detect the presence of eggs in the Fallopian tube and communicate their presence to the consulting physician or nurse and the patient, so that the next step can be initiated in a timely fashion. In this paper, we propose a conceptual architecture from a communications engineering point of view. The architecture combines intra-body nano-sensor network for detecting Fallopian tube activity, with body-area network for receiving information from the intra-body network and communicating the same over-the-air to the involved personnel (physician/nurse/patient). Preliminary simulations have been conducted using particle based stochastic simulator to investigate the relationship between achievable information rates, signal to noise ratio (SNR) and distance. It has been found that data rate as high as 300 Mbps is achievable at SNR 45. Hence, the proposed architecture ensures transfer of information with near-zero latency and minimum energy along with high throughput, so that necessary action can be taken within the short time-window of the Fallopian tube activity.

This paper presents a multi-bit reconfigurable intelligent surface (RIS) with a high phase resolution, capable of beam-steering in the azimuthal plane at sub-6 Gigahertz (GHz). Field trials in realistic indoor deployments have been carried out, with coverage enhancement performance ascertained for three common wireless communication scenarios. Namely, serving users in an open lobby with mixed line of sight and non-line of sight conditions, communication via a junction between long corridors, and a multi-floor scenario with propagation via windows. This work explores the potential for reconfigurable intelligent surface (RIS) deployment to mitigate non-line of sight effects in indoor wireless communications. In a single transmitter, single receiver non-line of sight link, received power improvement of as much as 40 dB is shown to be achievable by suitable placement of a RIS, with an instantaneous bandwidth of at least 100 MHz possible over a 3 to 4.5 GHz range. In addition, the effects of phase resolution on the optimal power reception for the multi-bit RIS have been experimentally verified, with a 2.65 dB improvement compared to a 1-bit case.

In this letter, we investigate the performance of reconfigurable intelligent surface (RIS)-assisted communications, under the assumption of generalized Gaussian noise (GGN), over Rayleigh fading channels. Specifically, we consider an RIS, equipped with $N$ reflecting elements, and derive a novel closed-form expression for the symbol error rate (SER) of arbitrary modulation schemes. The usefulness of the derived new expression is that it can be used to capture the SER performance in the presence of special additive noise distributions such as Gamma, Laplacian, and Gaussian noise. These special cases are also considered and their associated asymptotic SER expressions are derived, and then employed to quantify the achievable diversity order of the system. The theoretical framework is corroborated by numerical results, which reveal that the shaping parameter of the GGN ($\alpha$) has a negligible effect on the diversity order of RIS-assisted systems, particularly for large $\alpha$ values. Accordingly, the maximum achievable diversity order is determined by $N$.

Human motion detection is getting considerable attention in the field of Artificial Intelligence (AI) driven healthcare systems. Human motion can be used to provide remote healthcare solutions for vulnerable people by identifying particular movements such as falls, gait and breathing disorders. This can allow people to live more independent lifestyles and still have the safety of being monitored if more direct care is needed. At present wearable devices can provide real time monitoring by deploying equipment on a person's body. However, putting devices on a person's body all the time make it uncomfortable and the elderly tends to forget it to wear as well in addition to the insecurity of being tracked all the time. This paper demonstrates how human motions can be detected in quasi-real-time scenario using a non-invasive method. Patterns in the wireless signals presents particular human body motions as each movement induces a unique change in the wireless medium. These changes can be used to identify particular body motions. This work produces a dataset that contains patterns of radio wave signals obtained using software defined radios (SDRs) to establish if a subject is standing up or sitting down as a test case. The dataset was used to create a machine learning model, which was used in a developed application to provide a quasi-real-time classification of standing or sitting state. The machine learning model was able to achieve 96.70 % accuracy using the Random Forest algorithm using 10 fold cross validation. A benchmark dataset of wearable devices was compared to the proposed dataset and results showed the proposed dataset to have similar accuracy of nearly 90 %. The machine learning models developed in this paper are tested for two activities but the developed system is designed and applicable for detecting and differentiating x number of activities., Comment: 20 pages 18 figures, journal

Following the standardization and deployment of fifth generation (5G) network, researchers have shifted their focus to beyond 5G communication. Existing technologies have brought forth a plethora of applications that could not have been imagined in the past years. Beyond 5G will enable us to rethink the capability, it will offer in various sectors including agriculture, search and rescue and more specifically in the delivery of health care services. Unobtrusive and non-invasive measurements using radio frequency (RF) sensing, monitoring and control of wearable medical devices are the areas that would potentially benefit from beyond 5G. Applications such as RF sensing, device charging and remote patient monitoring will be a key challenge using millimetre (mmWave) communication. The mmWaves experience multi-path induced fading, where the rate of attenuation is larger as compared to the microwaves. Eventually, mmWave communication systems would require range extenders and guided surfaces. A proposed solution is the use of intelligent reflective surfaces, which will have the ability to manipulate electromagnetic (EM) signals. These intelligent surfaces mounted and/or coated on walls aka - Intelligent Walls are planar and active surfaces, which will be a key element in beyond 5G and 6G communication. These intelligent walls equipped with machine learning algorithm and computation power would have the ability to manipulate EM waves and act as gateways in the heterogeneous network environment. The article presents the application and vision of intelligent walls for next-generation healthcare in the era of beyond 5G., Comment: 6 pages, 3 figures

A novel approach is presented in this work for context-aware connectivity and processing optimization of Internet of things (IoT) networks. Different from the state-of-the-art approaches, the proposed approach simultaneously selects the best connectivity and processing unit (e.g., device, fog, and cloud) along with the percentage of data to be offloaded by jointly optimizing energy consumption, response-time, security, and monetary cost. The proposed scheme employs a reinforcement learning algorithm, and manages to achieve significant gains compared to deterministic solutions. In particular, the requirements of IoT devices in terms of response-time and security are taken as inputs along with the remaining battery level of the devices, and the developed algorithm returns an optimized policy. The results obtained show that only our method is able to meet the holistic multi-objective optimisation criteria, albeit, the benchmark approaches may achieve better results on a particular metric at the cost of failing to reach the other targets. Thus, the proposed approach is a device-centric and context-aware solution that accounts for the monetary and battery constraints.

Recent advances in programmable metasurfaces, also dubbed as reconfigurable intelligent surfaces (RISs), are envisioned to offer a paradigm shift from uncontrollable to fully tunable and customizable wireless propagation environments, enabling a plethora of new applications and technological trends. Therefore, in view of this cutting edge technological concept, we first review the architecture and electromagnetic waves manipulation functionalities of RISs. We then detail some of the recent advancements that have been made towards realizing these programmable functionalities in wireless communication applications. Furthermore, we elaborate on how machine learning (ML) can address various constraints introduced by the real-time deployment of RISs, particularly in terms of latency, storage, energy efficiency, and computation. A review of the state-of-the-art research on the integration of ML with RISs is presented, highlighting their potentials as well as challenges. Finally, the paper concludes by offering a look ahead towards unexplored possibilities of ML mechanisms in the context of RISs.

With the huge advancement of nanotechnology over the past years, the devices are shrinking into micro-scale, even nano-scale. Additionally, the Internet of nano-things (IoNTs) are generally regarded as the ultimate formation of the current sensor networks and the development of nanonetworks would be of great help to its fulfilment, which would be ubiquitous with numerous applications in all domains of life. However, the communication between the devices in such nanonetworks is still an open problem. Body-centric nanonetworks are believed to play an essential role in the practical application of IoNTs. BCNNs are also considered as domain specific like wireless sensor networks and always deployed on purpose to support a particular application. In these networks, electromagnetic and molecular communications are widely considered as two main promising paradigms and both follow their own development process. In this survey, the recent developments of these two paradigms are first illustrated in the aspects of applications, network structures, modulation techniques, coding techniques and security to then investigate the potential of hybrid communication paradigms. Meanwhile, the enabling technologies have been presented to apprehend the state-of-art with the discussion on the possibility of the hybrid technologies. Additionally, the inter-connectivity of electromagnetic and molecular body-centric nanonetworks is discussed. Afterwards, the related security issues of the proposed networks are discussed. Finally, the challenges and open research directions are presented.

In this paper, using the stochastic geometry, we develop a tractable uplink modeling framework for the outage probability of both the single and multi-tier millimeter wave (mmWave) cellular networks. Each tier's mmWave base stations (BSs) are randomly located and they have particular spatial density, antenna gain, receiver sensitivity, blockage parameter and pathloss exponents. Our model takes account of the maximum power limitation and the per-user power control. More specifically, each user, which could be in line-of-sight (LOS) or non-LOS to its serving mmWave BS, controls its transmit power such that the received signal power at its serving BS is equal to a predefined threshold. Hence, a truncated channel inversion power control scheme is implemented for the uplink of mmWave cellular networks. We derive closed-form expressions for the signal-to-interference-and-noise-ratio (SINR) outage probability for the uplink of both the single and multi-tier mmWave cellular networks. Furthermore, we analyze the case with a dense network by utilizing the simplified model, where the LOS region is approximated as a fixed LOS disc. The results show that imposing a maximum power constraint on the user significantly affects the SINR outage probability in the uplink of mmWave cellular networks., Comment: 11 Figures

Index modulation (IM) has recently emerged as a promising concept for spectrum and energy-efficient next generation wireless communications systems since it strikes a good balance among error performance, complexity, and spectral efficiency. IM technique, when applied to multicarrier waveforms, yields the ability to convey the information not only by M-ary signal constellations as in conventional multicarrier systems but also by the indexes of the subcarriers, which are activated according to the incoming bit stream. Although IM is well studied for OFDM based systems, FBMC with index modulation has not been thoroughly investigated. In this paper, we shed light on the potential and implementation of IM technique for QAM based FBMC system. We start with a mathematical model of the IM based QAM-FBMC system (FBMC/QAM-IM) along with the derivation of interference terms at the receiver due to channel distortions and noise. The interference terms including the ones introduced by the multipath channel are analyzed in terms of MSE and output SINR. It is shown with analytical and simulation results that the interference power in FBMC/QAM-IM is smaller compared to that of the conventional FBMC/QAM system as some of the subcarriers are inactive. The performance of FBMC/QAM with IM is investigated by comparing the SIR and output SINR with that of the conventional FBMC/QAM system along with the BER performance which shows that the FBMC/QAM-IM is a promising transmission technique for future wireless networks.

Transmission of complex-valued symbols using filter bank multicarrier systems has been an issue due to the self-interference between the transmitted symbols both in the time and frequency domain (so-called intrinsic interference). In this paper, we propose a novel low-complexity interference-free filter bank multicarrier system with QAM modulation (FBMC/QAM) using filter deconvolution. The proposed method is based on inversion of the prototype filters which completely removes the intrinsic interference at the receiver and allows the use of complex-valued signaling. The interference terms in FBMC/QAM with and without the proposed system are analyzed and compared in terms of mean square error (MSE). It is shown with theoretical and simulation results that the proposed method cancels the intrinsic interference and improves the output signal to interference plus noise ratio (SINR) at the expense of slight enhancement of residual interferences caused by multipath channel. The complexity of the proposed system is also analyzed along with performance evaluation in an asynchronous multiservice scenario. It is shown that the proposed FBMC/QAM system with filter deconvolution outperforms the conventional OFDM system.

Due to the use of an appropriately designed pulse shaping prototype filter, filter bank multicarrier (FBMC) system can achieve low out of band (OoB) emissions and is also robust to the channel and synchronization errors. However, it comes at a cost of long filter tails which may reduce the spectral efficiency significantly when the block size is small. Filter output truncation (FOT) can reduce the overhead by discarding the filter tails but may also significantly destroy the orthogonality of FBMC system, by introducing inter carrier interference (ICI) and inter symbol interference (ISI) terms in the received signal. As a result, the signal to interference ratio (SIR) is degraded. In addition, the presence of intrinsic interference terms in FBMC also proves to be an obstacle in combining multiple input multiple output (MIMO) with FBMC. In this paper, we present a theoretical analysis on the effect of FOT in an MIMO-FBMC system. First, we derive the matrix model of MIMO-FBMC system which is subsequently used to analyze the impact of finite filter length and FOT on the system performance. The analysis reveals that FOT can avoid the overhead in time domain but also introduces extra interference in the received symbols. To combat the interference terms, we then propose a compensation algorithm that considers odd and even overlapping factors as two separate cases, where the signals are interfered by the truncation in different ways. The general form of the compensation algorithm can compensate all the symbols in a MIMO-FBMC block and can improve the SIR values of each symbol for better detection at the receiver. It is also shown that the proposed algorithm requires no overhead and can still achieve a comparable BER performance to the case with no filter truncation.