Search

This study considers a dual-polarized intelligent reflecting surface (DP-IRS)-assisted multiple-input multiple-output (MIMO) single-user wireless communication system. The transmitter and receiver are equipped with DP antennas, and each antenna features a separate phase shifter for each polarization. We attempt to maximize the system's spectral efficiency (SE) by optimizing the operations of the reflecting elements at the DP-IRS, precoder/combiner at the transmitter/receiver, and vertical/horizontal phase shifters at the DP antennas. To address this problem, we propose a three-step alternating optimization (AO) algorithm based on the semi-definite relaxation method. Next, we consider asymptotically low/high signal-to-noise ratio (SNR) regimes and propose low-complexity algorithms. In particular, for the low-SNR regime, we derive computationally low-cost closed-form solutions. According to the obtained numerical results, the proposed algorithm outperforms the various benchmark schemes. Specifically, our main algorithm exhibits a 65.6 \% increase in the SE performance compared to random operations. In addition, we compare the SE performance of DP-IRS with that of simple IRS (S-IRS). For \(N = 50\), DP-IRS achieves 24.8 \%, 28.2 \%, and 30.3 \% improvements in SE for \({4} \times {4}\), \({8} \times {8}\), and \({16} \times {16}\) MIMO, respectively, compared to S-IRS., Comment: 32 pages, 13 figures, 1 table

This work considers the multihop multiple-input multiple-output relay network under short-packet communications to facilitate not only ultra-reliability but also low-latency communications. We assume that the transmit antenna selection (TAS) scheme is utilized at the transmit side, whereas either selection combining (SC) or maximum ratio combining (MRC) is leveraged at the receive side to achieve diversity gains. For quasi-static Rayleigh fading channels and the finite-blocklength regime, we derive the approximate closed-form expressions of the end-to-end (e2e) block error rate (BLER) for both the TAS/MRC and TAS/SC schemes. The asymptotic performance in the high signal-to-noise ratio regime is derived, from which the comparison of TAS/MRC and TAS/SC schemes in terms of the diversity order, e2e BLER loss, and SNR gap is provided. The e2e latency and throughputs are also analyzed for the considered schemes. The correctness of our analysis is confirmed via Monte Carlo simulations., Comment: submitted to IEEE International Conference on Communications 2022 (Conference version of IEEE Transactions on Wireless Communications paper), Short-packet communication, ultra-reliable and low-latency communications (uRLLCs), multihop relaying, multiple-input multiple-output (MIMO), transmit and receive diversity

We propose a novel concept of hybrid relay-reflecting intelligent surface (HR-RIS), in which a single or few elements are deployed with power amplifiers (PAs) to serve as active relays, while the remaining elements only reflect the incident signals. The design and optimization of the HR-RIS is formulated in a spectral efficiency (SE) maximization problem, which is efficiently solved by the alternating optimization (AO) method. The simulation results show that a significant improvement in the SE can be attained by the proposed HR-RIS, even with a limited power budget, with respect to the conventional reconfigurable intelligent surface (RIS). In particular, the favorable design and deployment of the HR-RIS are analytically derived and numerically justified., Comment: arXiv admin note: substantial text overlap with arXiv:2103.03900

Reconfigurable intelligent surface (RIS) has emerged as a cost- and energy-efficient solution to enhance the wireless communication capacity. However, recent studies show that a very large surface is required for a RIS-assisted communication system; otherwise, they may be outperformed by the conventional relay. Furthermore, the performance gain of a RIS can be considerably degraded by hardware impairments such as limited-resolution phase shifters. To overcome those challenges, we propose a novel concept of hybrid relay-reflecting intelligent surface (HR-RIS), in which a single or few elements are deployed with power amplifiers (PAs) to serve as active relays, while the remaining elements only reflect the incident signals. Two architectures are proposed, including the fixed and dynamic HR-RIS. Their coefficient matrices are obtained based on alternating optimization (AO) and power allocation strategies, which enable understanding the fundamental performances of RIS and relaying-based systems with a trade-off between the two. The simulation results show that a significant improvement in both the spectral efficiency (SE) and energy efficiency (EE) with respect to the conventional RIS-aided system can be attained by the proposed schemes, especially, by the dynamic HR-RIS. In particular, the favorable design and deployment of the HR-RIS are analytically derived and numerically justified.

Intelligent signal processing for wireless communications is a vital task in modern wireless systems, but it faces new challenges because of network heterogeneity, diverse service requirements, a massive number of connections, and various radio characteristics. Owing to recent advancements in big data and computing technologies, artificial intelligence (AI) has become a useful tool for radio signal processing and has enabled the realization of intelligent radio signal processing. This survey covers four intelligent signal processing topics for the wireless physical layer, including modulation classification, signal detection, beamforming, and channel estimation. In particular, each theme is presented in a dedicated section, starting with the most fundamental principles, followed by a review of up-to-date studies and a summary. To provide the necessary background, we first present a brief overview of AI techniques such as machine learning, deep learning, and federated learning. Finally, we highlight a number of research challenges and future directions in the area of intelligent radio signal processing. We expect this survey to be a good source of information for anyone interested in intelligent radio signal processing, and the perspectives we provide therein will stimulate many more novel ideas and contributions in the future., Comment: Accepted for publication. Copyright may be transferred without notice, after which this version may no longer be accessible

In this paper, we propose a new hybrid analog and digital combining architecture for millimeter wave (mmWave) multi-user multiple-input multiple-output (MU-MIMO) systems. The proposed structure employs antenna subset selection per radio frequency (RF) chain based on active/inactive switches and uses constant phase shifters (CPS) to control the phases of signals in the RF circuit. In this scheme, for each RF chain, a subset of receive antennas that contribute more to the desired signal power than the interference power is chosen for signal combining in the analog domain, whereas other receive antennas are excluded from signal combining, thereby enhancing sum-rates. Simultaneously, the proposed structure reduces power consumption in the RF circuit by exclusively activating switches that correspond to the antennas selected for each RF chain. We also develop three low-complexity algorithms for per-RF chain antenna subset selection. Finally, through numerical simulation, we show that the proposed structure provides higher spectral efficiency and higher energy efficiency than conventional hybrid analog and digital combining schemes for mmWave MU-MIMO systems., Comment: 28 pages, 11 figures

In this paper, we propose a novel learning-aided sphere decoding (SD) scheme for large multiple-input--multiple-output systems, namely, deep path prediction-based sphere decoding (DPP-SD). In this scheme, we employ a neural network (NN) to predict the minimum metrics of the ``deep'' paths in sub-trees before commencing the tree search in SD. To reduce the complexity of the NN, we employ the input vector with a reduced dimension rather than using the original received signals and full channel matrix. The outputs of the NN, i.e., the predicted minimum path metrics, are exploited to determine the search order between the sub-trees, as well as to optimize the initial search radius, which may reduce the computational complexity of SD. For further complexity reduction, an early termination scheme based on the predicted minimum path metrics is also proposed. Our simulation results show that the proposed DPP-SD scheme provides a significant reduction in computational complexity compared with the conventional SD algorithm, despite achieving near-optimal performance., Comment: 15 pages, 5 figures

A variety of hybrid analog-digital beamforming architectures have recently been proposed for massive multiple-input multiple-output (MIMO) systems to reduce energy consumption and the cost of implementation. In the analog processing network of these architectures, the practical sub-connected structure requires lower power consumption and hardware complexity than the fully connected structure but cannot fully exploit the beamforming gains, which leads to a loss in overall performance. In this work, we propose a novel unequal sub-connected architecture for hybrid combining at the receiver of a massive MIMO system that employs unequal numbers of antennas in sub-antenna arrays. The optimal design of the proposed architecture is analytically derived, and includes antenna allocation and channel ordering schemes. Simulation results show that an enhancement of up to 10% can be attained in the total achievable rate by unequally assigning antennas to sub-arrays in the sub-connected system at the cost of a marginal increase in power consumption. Furthermore, in order to reduce the computational complexity involved in finding the optimal number of antennas connected to each radio frequency (RF) chain, we propose three low-complexity antenna allocation algorithms. The simulation results show that they can yield a significant reduction in complexity while achieving near-optimal performance.