Search

In low-power wide-area networks (LPWANs), various trade-offs among the bandwidth, data rates, and energy per bit have different effects on the quality of service under different propagation conditions (e.g. fading and multipath), interference scenarios, multi-user requirements, and design constraints. Such compromises, and the manner in which they are implemented, further affect other technical aspects, such as system's computational complexity and power efficiency. At the same time, this difference in trade-offs also adds to the technical flexibility in addressing a broader range of IoT applications. This paper addresses a physical layer LPWAN approach based on the Aggregate Spread Pulse Modulation (ASPM) and provides a brief assessment of its properties in additive white Gaussian noise (AWGN) channel. In the binary ASPM the control of the quality of service is performed through the change in the spectral efficiency, i.e., the data rate at a given bandwidth. Implementing M-ary encoding in ASPM further enables controlling service quality through changing the energy per bit (in about an order of magnitude range) as an additional trade-off parameter. Such encoding is especially useful for improving the ASPM's energy per bit performance, thus increasing its range and overall energy efficiency, and making it more attractive for use in LPWANs for IoT applications., Comment: 7 pages, 7 figures

In traditional spread-spectrum techniques, a wideband transmit signal is obtained by modulating a wideband carrier by a narrowband signal containing a relatively low-rate message. In the receiver, the respective demodulation/despreading restores the information-carrying narrowband signal. In this paper, we introduce an alternative approach, where the low-rate information is encoded directly into a wideband waveform of a given bandwidth, without physical "spreading" of the carrier's frequency. The main advantages of this approach lie in extended options for encoding the information, and in retaining a reversible control over the temporal and amplitude structures of the modulating wideband waveforms. Significant "excess bandwidth" (over that needed to carry the information) enables us to use allpass filters to manage statistical properties and time-domain appearances of these waveforms without changing their spectral composition. For example, a mixture of transmitted waveforms can be shaped as a low-crest-factor signal (e.g. to reduce the burden on the power amplifier), and/or made statistically indistinguishable from Gaussian noise (e.g. for covert transmissions and physical layer steganography), while the selected components of the received waveform can be transformed into high-crest-factor pulse trains suitable for multiplexing and/or low-SNR communications. Further, control over the temporal and amplitude structures of wideband waveforms carrying low-rate information enables effective use of nonlinear filtering techniques. Such techniques can be employed for robust real-time asynchronous extraction of the information, as well as for separation of wideband signal components with identical spectral content from each other. This can facilitate development of a large variety of low-SNR and covert communication configurations., Comment: 16 pages, 24 figures. arXiv admin note: substantial text overlap with arXiv:2005.00734, arXiv:2004.13610

In contrast to other spread-spectrum techniques, wideband pulse trains with relatively low pulse arrival rates may be considered unsuitable for covert communications. The high crest factor of such trains can be extremely burdensome for the transmitter hardware, and it makes the pulse trains easily detectable even at very low signal-to-noise ratios. In addition, it may appear that sharing the wideband channel by multiple users would require explicit allocation of the pulse arrival times for each sub-channel, which would be impractical in most cases. On the other hand, messaging by wideband pulse trains has many appealing features. Among those are the ease of synchronous as well as asynchronous pulse detection, and on-the-fly channel reconfigurability (e.g. changing the spreading factor). Favorably, the crest factor of a pulse train, as well as its apparent temporal and amplitude structure, can be easily, and reversibly, controlled by simple linear filtering. For example, a transmitted pulse train can be made statistically indistinguishable from the Gaussian component of the channel noise (e.g. the thermal noise) observed in the same spectral band, while the received signal will be the designed high-crest-factor wideband pulse train. In this paper, we utilize the so-called pulse pileup effect to perform such reversible control of the pulse train structure, enabling a wider use of this approach for synthesis of robust low-SNR covert communication links. We place a particular focus on the synchronous pulse detection in the receiver, that provides a better utilization of the channel spectrum., Comment: 8 pages, 11 figures. arXiv admin note: text overlap with arXiv:2004.13610

We outline an approach to physical-layer steganography where the transmitted low-power stego messages are statistically indistinguishable from the Gaussian component of the channel noise (e.g. the thermal noise) observed in the same spectral band, and thus the channel noise itself serves as an effective cover signal. We also demonstrate how the apparent spectral and temporal properties of transmitted additional, higher-power cover signals (including those using the existing communication protocols) can be made to match those of the low-power stego payload and the Gaussian noise, providing extra layers of obfuscation for both the cover and the stego messages. We further illustrate how a specific combination of linear and nonlinear filtering can be used for effective separation of the cover, payload, and/or "friendly jamming" signals even when all transmissions have essentially the same spectral characteristics as well as temporal and amplitude structures, and when there are no explicit differences in the spectral and/or temporal allocations for the cover and the stego messages., Comment: 20 pages, 18 figures

Robust fencing is an essential component of intermittently nonlinear filtering for mitigation of outlier interference. In such filtering, the upper and the lower fences establish a robust range that excludes noise outliers while including the signal of interest and the non-outlier noise. Then, the outlier values are replaced with those in mid-range. To increase the effectiveness of outlier noise identification, and to minimize the false negatives, the fences need to be both tight and robust to outlier noise. On the other hand, to minimize the false positives and to avoid the detrimental effects, such as instabilities and excessive distortions, often associated with nonlinear filtering, the fences need to be inclusive, so that the signal of interest and the non-outlier noise remain within the fences. Quantile Tracking Filters (QTFs) are an appealing choice for such robust fencing in intermittently nonlinear filtering, as QTFs are analog filters suitable for wideband real-time processing of continuous-time signals and are easily implemented in analog circuitry. Further, their numerical computations are O(1) per output value in both time and storage, which also enables their high-rate digital implementations in real time. In this paper, we first provide a brief general discussion of the outlier noise and its mitigation by intermittently nonlinear filters. We then focus on the basic properties of the QTF-based fencing, discuss the approaches to choosing its parameters, and illustrate the use of the QTF fencing for various types of the signal+noise mixtures. We also demonstrate how the Complementary Intermittently Nonlinear Filtering (CINF) arrangements allow us to increase the tightness and robustness of the QTF fencing, while preserving its inclusivity, and to enable the mitigation of outlier noise obscured by high-amplitude non-outlier signals such as the signal of interest itself., Comment: 12 pages, 17 figures

In addition to ever-present thermal noise, communication and sensor systems can contain significant amounts of interference with outlier (e.g. impulsive) characteristics. Such outlier interference (including that caused by nonlinear signal distortions, e.g. clipping) can be efficiently mitigated in real-time using intermittently nonlinear filters. Depending on the interference nature and composition, improvements in the quality of the signal of interest achieved by such filtering will vary from "no harm" to substantial. In this tutorial, we explain in detail why the underlying outlier nature of interference often remains obscured, discussing the many challenges and misconceptions associated with state-of-art analog and/or digital nonlinear mitigation techniques, especially when addressing complex practical interference scenarios. We then focus on the methodology and tools for real-time outlier noise mitigation, demonstrating how the "excess band" observation of outlier noise enables its efficient in-band mitigation. We introduce the basic real-time nonlinear components that are used for outlier noise filtering and provide examples of their implementation. We further describe complementary nonlinear filtering arrangements for wide- and narrow-band outlier noise reduction, providing illustrations of their performance and the effect on channel capacity. Finally, we outline "effectively analog" digital implementations of these filtering structures, discuss their broader applications, and comment on the ongoing development of the platform for their demonstration and testing. To emphasize the effectiveness and versatility of this approach, in our examples we use particularly challenging waveforms that severely obscure low-amplitude outlier noise, such as broadband chirp signals (e.g. used in radar, sonar, and spread-spectrum communications) and "bursty," high crest factor signals (e.g. OFDM)., Comment: 9 pages, 12 figures. arXiv admin note: substantial text overlap with arXiv:1905.10476, arXiv:1906.01456

When interference affecting various communication and sensor systems contains clearly identifiable outliers (e.g. an impulsive component), it can be efficiently mitigated in real time by intermittently nonlinear filters developed in our earlier work, achieving improvements in the signal quality otherwise unattainable. However, apparent amplitude outliers in the interference can disappear and reappear due to various filtering effects, including fading and multipass, as the signal propagates through media and/or the signal processing chain. In addition, the outlier structure of the interference can be obscured by strong non-outlier interfering signals, such as thermal noise and/or adjacent channel interference, or by the signal of interest itself. In this paper, we first outline the overall approach to using intermittently nonlinear filters for in-band, real-time mitigation of such interference with hidden outlier components in practical complex interference scenarios. We then introduce Complementary Intermittently Nonlinear Filters (CINFs) and focus on the particular task of mitigating the outlier noise obscured by the signal of interest itself. We describe practical implementations of such nonlinear filtering arrangements for mitigation of hidden outlier interference, in the process of analog-to-digital conversion, for wide ranges of interference powers and the rates of outlier generating events. To emphasize the effectiveness and versatility of this approach, in our examples we use particularly challenging waveforms that severely obscure low-amplitude outlier noise, such as broadband chirp signals (e.g. used in radar, sonar, and spread-spectrum communications) and ``bursty," high crest factor signals (e.g. OFDM)., Comment: 9 pages, 14 figures. arXiv admin note: substantial text overlap with arXiv:1905.10476

In addition to ever-present thermal noise, various communication and sensor systems can contain significant amounts of interference with outlier (e.g. impulsive) characteristics. Such outlier noise can be efficiently mitigated in real-time using intermittently nonlinear filters. Depending on the noise nature and composition, improvements in the quality of the signal of interest will vary from "no harm" to substantial. In this paper, we explain in detail why the underlying outlier nature of interference often remains obscured, discussing the many challenges and misconceptions associated with state-of-art analog and/or digital nonlinear mitigation techniques, especially when addressing complex practical interference scenarios. We then focus on the methodology and tools for real-time outlier noise mitigation, demonstrating how the "excess band" observation of outlier noise enables its efficient in-band mitigation. We introduce the basic real-time nonlinear components that are used for outlier noise filtering, and provide examples of their implementation. We further describe complementary nonlinear filtering arrangements for wide- and narrow-band outlier noise reduction, providing several illustrations of their performance and the effect on channel capacity. Finally, we outline "effectively analog" digital implementations of these filtering structures, discuss their broader applications, and comment on the ongoing development of the platform for their demonstration and testing., Comment: 14 pages, 34 figures

Impulsive noise is a major impediment to orthogonal frequency-division multiplexing (OFDM) based underwater acoustic (UWA) communications. In this work, we evaluate the performance of a memoryless analog nonlinear preprocessor (MANP) that is used to mitigate outliers. The proposed MANP exhibits intermittent nonlinearity only in the presence of the impulsive noise and suppresses the power of outliers based on their amplitudes. Since the outliers are distinguishable in the analog domain prior to anti-aliasing filtering, the MANP outperforms its digital counterparts in all scenarios. Experimental results using data collected in an under-ice environment, demonstrate the superior BER performance of our approach relative to classical nonlinear approaches such as blanking and clipping., Comment: Accepted in IEEE CCWC 2019

An Adaptive Nonlinear Differential Limiter (ANDL) is proposed in this paper to efficiently alleviate the impact of impulsive noise (IN) in a communication system. Unlike existing nonlinear methods, the ANDL is implemented in the analog domain where the broader acquisition bandwidth makes outliers more detectable and consequently it is easier to remove them. While the proposed ANDL behaves like a linear filter when there is no outlier, it exhibits intermittent nonlinearity in response to IN. Therefore, the structure of the matched filter in the receiver is modified to compensate the filtering effect of the ANDL in the linear regime. In this paper, we quantify the performance of the ANDL by deriving a closed-form analytical bound for the average signal-to-noise ratio (SNR) at the output of the filter. The calculation is based on the idea that the ANDL can be perceived as a time-variant linear filter whose bandwidth is modified based on the intensity of the IN. In addition, by linearizing the filter time parameter variations, we treat the ANDL as a set of linear filters where the exact operating filter at a given time depends upon the magnitude of the outliers. The theoretical average bit error rate (BER) is validated through simulations and the performance gains relative to classical methods such as blanking and clipping are quantified., Comment: Accepted in IEEE Transactions on Vehicular Technology

It is well known that the performance of OFDM-based Powerline Communication (PLC) systems is impacted by impulsive noise. In this work, we propose a practical blind adaptive analog nonlinear filter to efficiently detect and mitigate impulsive noise. Specially, we design an Adaptive Canonical Differential Limiter (ACDL) which is constructed from a Clipped Mean Tracking Filter (CMTF) and Quartile Tracking Filters (QTFs). The QTFs help to determine a real-time range that excludes outliers. This range is fed into the CMTF which is responsible for mitigating impulsive noise. The CMTF is a nonlinear analog filter and its nonlinearity is controlled by the aforementioned range. Proper selection of this range ensures the improvement of the desired signal quality in impulsive environment. It is important to note that the proposed ACDL behaves like a linear filter in case of no impulsive noise. In this context, the traditional matched filter construction is modified to ensure distortionless processing of the desired signal. The performance improvement of the proposed ACDL is due to the fact that unlike other nonlinear methods, the ACDL is implemented in the analog domain where the outliers are still broadband and distinguishable. Simulation results in PRIME (OFDM-based narrowband PLC system) demonstrate the superior BER performance of ACDL relative to other nonlinear approaches such as blanking and clipping in impulsive noise environments., Comment: This paper has been accepted in IEEE International Conference on Communications (ICC) 2018. arXiv admin note: text overlap with arXiv:1712.03267

Asynchronous and cyclostationary impulsive noise can severely impact the bit-error-rate (BER) of OFDM-based powerline communication systems. In this paper, we analyze an adaptive nonlinear analog front end filter that mitigates various types of impulsive noise without detrimental effects such as self-interference and out-of-band power leakage caused by other nonlinear approaches like clipping and blanking. Our proposed Adaptive Nonlinear Differential Limiter (ANDL) is constructed from a linear analog filter by applying a feedback-based nonlinearity, controlled by a single resolution parameter. We present a simple practical method to find the value of this resolution parameter that ensures the mitigation of impulsive without impacting the desired OFDM signal. Unlike many prior approaches for impulsive noise mitigation that assume a statistical noise model, ANDL is blind to the exact nature of the noise distribution, and is designed to be fully compatible with existing linear front end filters. We demonstrate the potency of ANDL by simulating the OFDM-based narrowband PLC compliant with the IEEE standards. We show that the proposed ANDL outperforms other approaches in reducing the BER in impulsive noise environments., Comment: This paper has been accepted and presented in Latincom 2017