Search

Recently, a two-dimension (2D) modulation waveform of orthogonal time-frequency-space (OTFS) has been a popular 6G candidate to replace existing orthogonal frequency division multiplexing (OFDM). The extensive OTFS researches help to make both the advantages and limitations of OTFS more and more clear. The limitations are not easy to overcome as they come from OTFS on-grid 2D convolution channel model. Instead of solving OTFS inborn challenges, this paper proposes a novel 2D modulation waveform named orthogonal time-frequency division multiplexing (OTFDM). OTFDM uses a 2D dot-product channel model to cope with doubly-selectivity. Compared with OTFS, OTFDM supports grid-free channel delay and Doppler and gains a simple and efficient 2D equalization. The concise dot-division equalization can be easily combined with MIMO. The simulation result shows that OTFDM is able to bear high mobility and greatly outperforms OFDM in doubly-selective channel., Comment: Accepted by IEEE PIMRC 2023

Joint communication and sensing (JCAS) is a very promising 6G technology, which attracts more and more research attention. Compared with communication, radar has many unique features in terms of waveform design criteria, self-interference cancellation (SIC), aperture-dependent resolution, and virtual aperture. This paper proposes a novel waveform design named max-aperture radar slicing (MaRS) to gain a large time-frequency aperture, which is generated by orthogonal frequency division multiplexing (OFDM) and occupies only a tiny fraction of OFDM resources. The proposed MaRS keeps the radar advantages of constant modulus, zero auto-correlation sequence, and simple SIC. As MaRS consumes much less resources, conventional processing methods fail, and novel angle-Doppler map based methods are proposed to obtain the range-velocity-angle information from MaRS echos and strong clutters. To avoid complex full-duplex communication, this paper proposes a hybrid-duplex JCAS scheme composed of half-duplex communication and full-duplex radar. The half-duplex communication antenna array is reused, and a small sensing-dedicated antenna array is added. Using these two arrays, a large space-domain sensing aperture is virtually formed to greatly improve the angle resolution. The numerical results show that the proposed MaRS and hybrid duplex can achieve a high sensing resolution with only 0.4% OFDM resources, which reduces the overheads of conventional methods to less than one tenth., Comment: in IEEE Internet of Things Journal

Joint communications and sensing is a promising 6G technology, and the challenge is how to integrate them efficiently. Existing frequency-division and time-division coexistence can hardly bring a gain of integration. Directly using orthogonal frequency-division multiplexing (OFDM) to sense requires complex in-band full-duplex to cancel the selfinterference (SI). To solve these problems, this paper proposes novel coexistence schemes to gain super sensing range (SSR) and simple SI cancellation. SSR enables JCS to gain a sensing range of a sensing-only scheme and shares the resources with communications. Random time-division is proposed to gain a super Doppler range. Flexible sensing implanted OFDM (FSIOFDM) is also proposed. FSI-OFDM uses random sensing occasions to gain super Doppler range, as well as utilizes the fixed tail sensing occasions to achieve supper distance range. The simulation results show that the proposed schemes can gain SSR with limited resources.

Reconfigurable intelligent surface (RIS) can improve the capacity of the wireless communication system by providing the extra link between the base station (BS) and the user. In order to resist the "multiplicative fading" effect, RIS is more likely to develop into extremely large-scale RIS (XL-RIS) for future 6G communications. Beam training is an effective way to acquire channel state information (CSI) for the XL-RIS assisted system. Existing beam training schemes rely on the far-field codebook, which is designed based on the far-field channel model. However, due to the large aperture of XL-RIS, the user is more likely to be in the near-field region of XL-RIS. The far-field codebook mismatches the near-field channel model. Thus, the existing far-field beam training scheme will cause severe performance loss in the XL-RIS assisted near-field communications. To solve this problem, we propose the efficient near-field beam training schemes by designing the near-field codebook to match the near-field channel model. Specifically, we firstly design the near-field codebook by considering the near-field cascaded array steering vector of XL-RIS. Then, the optimal codeword for XL-RIS is obtained by the exhausted training procedure between the XL-RIS and the user. In order to reduce the beam training overhead, we further design a hierarchical near-field codebook and propose the corresponding hierarchical near-field beam training scheme, where different levels of sub-codebooks are searched in turn with reduced codebook size. Simulation results show the two proposed near-field beam training schemes both perform better than the existing far-field beam training scheme. Particulary, the hierarchical near-field beam training scheme can greatly reduce the beam training overhead with acceptable performance loss., Comment: Simulation codes will be provided in the following link to reproduce the results presented in this paper after publication: http://oa.ee.tsinghua.edu.cn/dailinglong/publications/publications.html

Cell-free massive MIMO provides ubiquitous connectivity for multiple users, and implementation using radio stripes is very efficient. Compared with collocated massive MIMO, the major cost includes fronthaul overheads and AP hardware. Maximum ratio combination (MRC) achieves a low fronthaul loading and low-cost AP, but the performance is bad. This letter proposes to implement a quasi-LMMSE (Q-LMMSE) processing using MRC fronthaul design. Q-LMMSE is derived from a standard LMMSE, which gains interference information from MRC signal via singular value decomposition. Simulation results show that the proposed Q-LMMSE increases the spectral efficiency by several times using same MRC fronthaul., Comment: arXiv admin note: text overlap with arXiv:2012.11076

The focus of this white paper is on machine learning (ML) in wireless communications. 6G wireless communication networks will be the backbone of the digital transformation of societies by providing ubiquitous, reliable, and near-instant wireless connectivity for humans and machines. Recent advances in ML research has led enable a wide range of novel technologies such as self-driving vehicles and voice assistants. Such innovation is possible as a result of the availability of advanced ML models, large datasets, and high computational power. On the other hand, the ever-increasing demand for connectivity will require a lot of innovation in 6G wireless networks, and ML tools will play a major role in solving problems in the wireless domain. In this paper, we provide an overview of the vision of how ML will impact the wireless communication systems. We first give an overview of the ML methods that have the highest potential to be used in wireless networks. Then, we discuss the problems that can be solved by using ML in various layers of the network such as the physical layer, medium access layer, and application layer. Zero-touch optimization of wireless networks using ML is another interesting aspect that is discussed in this paper. Finally, at the end of each section, important research questions that the section aims to answer are presented.

With the open of the scale-up commercial deployment of 5G network, more and more researchers and related organizations began to consider the next generation of mobile communication system. This article will explore the 6G concept for 2030s. Firstly, this article summarizes the future 6G vision with four keywords: "Intelligent Connectivity", "Deep Connectivity", "Holographic Connectivity" and "Ubiquitous Connectivity", and these four keywords together constitute the 6G overall vision of "Wherever you think, everything follows your heart ". Then, the technical requirements and challenges to realize the 6G vision are analyzed, including peak throughput, higher energy efficiency, connection every where and anytime, new theories and technologies, self-aggregating communications fabric, and some non-technical challenges. Then the potential key technologies of 6G are classified and presented: communication technologies on new spectrum, including terahertz communication and visible light communication; fundamental technologies, including sparse theory (compressed sensing), new channel coding technology, large-scale antenna and flexible spectrum usage; special technical features, including Space-Air-Ground-Sea integrated communication and wireless tactile network. By exploring the 6G vision, requirements and challenges, as well as potential key technologies, this article attempts to outline the overall framework of 6G, and to provide directional guidance for the subsequent 6G research. Keywords 6G, vision, terahertz, VLC, compressed sensing, free duplex, wireless tactile network, Comment: 28 pages, 6 figures, SCIENTIA SINICA Informationis