Search

This article demonstrates the performance of back-to-back connected voltage source inverter (BTB-VSI)-based distribution static compensator (DSTATCOM). In the proposed system, a three-phase three wire electrical utility system (EUS) is integrated with distributed energy resources (DER) through BTB-VSI. It has drawn more attention due to enhanced active power filtering, simple design procedure and performs reliable operation. The objectives of the research work is to provide clean power for weak EUS with improved power quality (PQ) such as, better voltage regulation, improved power factor (P.F), reduced total harmonic distortion (THD), balanced voltage at point of common coupling (PCC) and better optimal active power flow control (OAPFC), and so on. An artificial neurocontrol technique Kernel Hebbian Least Mean Square (KHLMS) is chosen to determine the accurate reference source current for operation of voltage source inverter (VSI). The BTB-VSI performance is investigated on both shunt compensation and OAPFC. The proposed system is converted to a simulation model and hardware unit using MATLAB/Simulink software and SPARTAN−6 field programmable gate arrays (FPGA) controller. Finally, the Simulation and experimental results illustrate that the shunt compensating ability with OAPFC of BTB-VSI performs better over VSI as per IEEE Std 1159–2019 grid code. [ABSTRACT FROM AUTHOR]

This article proposes an adaptive Kernel-Hebbian least mean square (KHLMS) controller for a dual voltage source inverter (VSI). The recommended topology consists of a distributed energy resource (DER) supported VSI called main VSI (MVSI) and split capacitor supported VSI termed as auxiliary VSI (AVSI). Both the MVSI and AVSI are used to serve the shunt compensation when DER is not integrated with MVSI. The DER scenario is considered to suppress the active power flow shortage in the utility grid. Here, optimal active power flow control (OAPFC) is managed by MVSI and shunt compensation is achieved by AVSI during DER operated mode. Hence, a dual VSI based distribution static compensator (DSTATCOM) facilitates the configuration merits such as reduction in system downtime cost, filter rating switching stress etc. Supremacy of both the neural network (NN) based controller and topology is presented by comparing VSI (called AVSI) in the context of harmonic reduction in source side, voltage balancing, power factor (PF) enhancement, better voltage regulation and OAPFC. The experimental results are obtained through field programmable gate array (FPGA) based hardware units which exhibit radical improvement in the power quality (PQ) conferring as per the international standard grid code (IEEE-519-2017). [ABSTRACT FROM AUTHOR]

A propounded control strategy called naive back propagation (NBP)-based icosϕ is implemented in designing of distribution static compensator (DSTATCOM) in this study. The performance of the DSTATCOM using both the proposed and icosϕ control technique are compared under varying load condition in the three-phase three-wire (3P3W) distribution system. The extraction of both tuned active as well as reactive weighting components are obtained from the accuracy of the control algorithm with respect to proportional.integral controllers. The comparative study reveals with source current harmonics reduction, voltage regulation, load balancing, power factor correction and sizing of VSC. The results demonstrate the robustness of the DSTATCOM in order to show the superiority, reliability, robustness and effectiveness of the proposed approach compared with the conventional one. The effectiveness of both the algorithms are validated through the simulation using MATLAB and real-time implementation conducted in real time digital simulator (RTDS) environment, showing the power quality indices. [ABSTRACT FROM AUTHOR]