Search

The harsh working environments of proton exchange membrane fuel cells (PEMFCs) pose huge challenges to the stability of Pt‐based alloy catalysts. The widespread presence of metallic bonds with significantly delocalized electron distribution often lead to component segregation and rapid performance decay. Here we report L10−Pt2CuGa intermetallic nanoparticles with a unique covalent atomic interaction between Pt−Ga as high‐performance PEMFC cathode catalysts. The L10−Pt2CuGa/C catalyst shows superb oxygen reduction reaction (ORR) activity and stability in fuel cell cathode (mass activity=0.57 A mgPt−1 at 0.9 V, peak power density=2.60/1.24 W cm−2 in H2‐O2/air, 28 mV voltage loss at 0.8 A cm−2 after 30 000 cycles). Theoretical calculations reveal the optimized adsorption of oxygen intermediates via the formed biaxial strain on L10−Pt2CuGa surface, and the durability enhancement stems from the stronger Pt−M bonds than those in L11−PtCu resulted from Pt−Ga covalent interactions. [ABSTRACT FROM AUTHOR]

The harsh working environments of proton exchange membrane fuel cells (PEMFCs) pose huge challenges to the stability of Pt‐based alloy catalysts. The widespread presence of metallic bonds with significantly delocalized electron distribution often lead to component segregation and rapid performance decay. Here we report L10−Pt2CuGa intermetallic nanoparticles with a unique covalent atomic interaction between Pt−Ga as high‐performance PEMFC cathode catalysts. The L10−Pt2CuGa/C catalyst shows superb oxygen reduction reaction (ORR) activity and stability in fuel cell cathode (mass activity=0.57 A mgPt−1 at 0.9 V, peak power density=2.60/1.24 W cm−2 in H2‐O2/air, 28 mV voltage loss at 0.8 A cm−2 after 30 000 cycles). Theoretical calculations reveal the optimized adsorption of oxygen intermediates via the formed biaxial strain on L10−Pt2CuGa surface, and the durability enhancement stems from the stronger Pt−M bonds than those in L11−PtCu resulted from Pt−Ga covalent interactions. [ABSTRACT FROM AUTHOR]

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d‐band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water‐splitting electrocatalysis. [ABSTRACT FROM AUTHOR]

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d‐band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water‐splitting electrocatalysis. [ABSTRACT FROM AUTHOR]

PtM alloy catalysts (e.g., PtFe, PtCo), especially in an intermetallic L10 structure, have attracted considerable interest due to their respectable activity and stability for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, metal‐catalyzed formation of ·OH from H2O2 (i.e., Fenton reaction) by Fe‐ or Co‐containing catalysts causes severe degradation of PEM/catalyst layers, hindering the prospects of commercial applications. Zinc is known as an antioxidant in Fenton reaction, but is rarely alloyed with Pt owing to its relatively negative redox potential. Here, sub‐4 nm intermetallic L10‐PtZn nanoparticles (NPs) are synthesized as high‐performance PEMFC cathode catalysts. In PEMFC tests, the L10‐PtZn cathode achieves outstanding activity (0.52 A mgPt−1 at 0.9 ViR‐free, and peak power density of 2.00 W cm−2) and stability (only 16.6% loss in mass activity after 30 000 voltage cycles), exceeding the U.S. DOE 2020 targets and most of the reported ORR catalysts. Density function theory calculations reveal that biaxial strains developed upon the disorder‐order (A1L10) transition of PtZn NPs would modulate the surface PtPt distances and optimize PtO binding for ORR activity enhancement, while the increased vacancy formation energy of Zn atoms in an ordered structure accounts for the improved stability. [ABSTRACT FROM AUTHOR]

Alkaline hydrogen evolution reaction (HER), consisting of Volmer and Heyrovsky/Tafel steps, requires extra energy for water dissociation, leading to more sluggish kinetics than acidic HER. Despite the advances in electrocatalysts, how to combine active sites to synergistically promote both steps and understand the underlying mechanism remain largely unexplored. Here, Density Functional Theory (DFT) calculations predict that NiO accelerates the Volmer step while metallic Ni facilitates the Heyrovsky/Tafel step. A facile strategy is thus developed to control Ni/NiO heterosurfaces in uniform and well-dispersed Ni-based nanocrystals, targeting both reaction steps synergistically. By systematically modulating the surface composition, we find that steering the elementary steps through tuning the Ni/NiO ratio can significantly enhance alkaline HER activity, and Ni/NiO nanocrystals with a Ni/NiO ratio of 23.7% deliver the best activity, outperforming other state-of-the-art analogues. The results suggest that integrating bicomponent active sites for elementary steps is effective for promoting alkaline HER, but they have to be balanced. [ABSTRACT FROM AUTHOR]

The commercialization of proton exchange membrane fuel cells (PEMFCs) relies on highly active and stable electrocatalysts for oxygen reduction reaction (ORR) in acid media. The most successful catalysts for this reaction are nanostructured Pt‐alloy with a Pt‐skin. The synthesis of ultrasmall and ordered L10‐PtCo nanoparticle ORR catalysts further doped with a few percent of metals (W, Ga, Zn) is reported. Compared to commercial Pt/C catalyst, the L10‐W‐PtCo/C catalyst shows significant improvement in both initial activity and high‐temperature stability. The L10‐W‐PtCo/C catalyst achieves high activity and stability in the PEMFC after 50 000 voltage cycles at 80 °C, which is superior to the DOE 2020 targets. EXAFS analysis and density functional theory calculations reveal that W doping not only stabilizes the ordered intermetallic structure, but also tunes the Pt‐Pt distances in such a way to optimize the binding energy between Pt and O intermediates on the surface. [ABSTRACT FROM AUTHOR]

The serious durability concerns of carbon supported Pt electrocatalysts for oxygen reduction reaction (ORR) have strictly limited the commercialization of fuel cells. Herein, cable-like carbon nanotubes (CNTs)@SnO 2 core@shell supports with regulable electronic metal-support interaction (EMSI) are designed for Pt nanoparticles (NPs) as ORR catalysts. Impressively, the best-performing Pt-CNT@SnO 2 catalyst with optimized d- band center achieves an excellent activity (mass activity (MA) of 0.68 A mg Pt −1 at 0.9 V iR-free and peak power density of 1618 mW cm−2) and record-high durability in H 2 -O 2 fuel cells (9.2 % MA and 8 % power density loss after 5k cycles under 1.0–1.5 V) among the reported Pt-based catalysts, which is also superior to the U.S. DOE 2025 targets. Density functional theory (DFT) calculations reveal that the strong metal-support bonding interaction (SMSBI) endows much larger adhesion energy and migration barrier towards Pt atoms compared to carbon supports, leading to the extraordinarily high stability in fuel cells. [Display omitted] • The Pt-CNT@SnO 2 catalyst demonstrates the best stability among reported Pt-based ORR catalysts under high potential regions. • Strong metal-support bonding interaction (SMSBI) between Pt and SnO 2 is able to stabilize Pt NPs against migration/agglomeration. • The d -band center of Pt is optimized by regulating the electronic metal-support interaction (EMSI). [ABSTRACT FROM AUTHOR]

[Display omitted] • Bi-Pd single atom alloy (SAA) nanodendrites (NDs) with Bi atomically dispersed in Pd matrices have been synthesized. • The FEs of CO on Bi 6 Pd 94 -SAA NDs catalyst reach 90.5 % and 91.8 % in H-type and gas diffusion flow cells, respectively. • The Pd mass normalized current densities of CO are 173.7 mA/cm2 and 111.4 A/g Pd at only -0.48 vs. RHE in a gas diffusion flow cell. • DFT calculation indicate that single Bi atom doping decreases H affinity and increases the reaction barrier for H 2 evolution on Pd. • Bi doping also decreases the free energy for *COOH generation which is a key intermediate for CO production. Pd is a catalyst for electrochemical CO 2 reduction to CO but often disturbed by H 2 and formate formation at low overpotentials due to its strong affinity to H atoms. Herein, guided by density functional theory (DFT) calculations, Bi-Pd single atom alloy (SAA) nanodendrites (NDs) with Bi atomically dispersed in Pd matrices have been developed for efficient CO 2 reduction to CO. The Faradic efficiencies (FEs) of CO on the Bi 6 Pd 94 -SAA ND catalyst reach 90.5 % and 91.8 % in H-type and gas diffusion flow cells with overpotentials of only 290 and 200 mV, respectively, which are among the best of the reported Pd-based electrocatalysts. The greatly enhanced CO formation on the Bi 6 Pd 94 -SAA NDs can be attributed to the increased reaction barriers for H 2 formation due to a lower H coverage resulted from Bi doping, and the decreased free energy for *COOH generation which is a key intermediate for CO production. [ABSTRACT FROM AUTHOR]

Engineering the crystal structure of Pt–M (M = transition metal) nanoalloys to chemically ordered ones has drawn increasing attention in oxygen reduction reaction (ORR) electrocatalysis due to their high resistance against M etching in acid. Although Pt–Ni alloy nanoparticles (NPs) have demonstrated respectable initial ORR activity in acid, their stability remains a big challenge due to the fast etching of Ni. In this work, sub‐6 nm monodisperse chemically ordered L10‐Pt–Ni–Co NPs are synthesized for the first time by employing a bifunctional core/shell Pt/NiCoOx precursor, which could provide abundant O‐vacancies for facilitated Pt/Ni/Co atom diffusion and prevent NP sintering during thermal annealing. Further, Co doping is found to remarkably enhance the ferromagnetism (room temperature coercivity reaching 2.1 kOe) and the consequent chemical ordering of L10‐Pt–Ni NPs. As a result, the best‐performing carbon supported L10‐PtNi0.8Co0.2 catalyst reveals a half‐wave potential (E1/2) of 0.951 V versus reversible hydrogen electrode in 0.1 m HClO4 with 23‐times enhancement in mass activity over the commercial Pt/C catalyst along with much improved stability. Density functional theory (DFT) calculations suggest that the L10‐PtNi0.8Co0.2 core could tune the surface strain of the Pt shell toward optimized Pt–O binding energy and facilitated reaction rate, thereby improving the ORR electrocatalysis. [ABSTRACT FROM AUTHOR]