Search

Single nanoparticle collision (SNC) technology has attracted increasing attention to explore single nanoparticle electrochemistry. By improving the temporal resolution of electrochemical recording, several recent studies have uncovered the intermittent electron transfer processes during the SNC of single silver nanoparticles. The electrode current curve displayed multiple current peaks that were completely separated, instead of a single peak. In the present work, we employed surface plasmon resonance microscopy to monitor the collision and oxidation processes of single silver nanoparticles. Simultaneous optical and electrochemical recordings provided comprehensive capability to correlate the physical movement of nanoparticles (from optical signal) and the electron transfer activity (from electrochemical signal). While previous studies hypothesized the physical detachment of nanoparticles from the electrode due to electrostatic repulsion or Brownian motion, the optical imaging revealed that nanoparticles often remained in physical touch with the electrode even though no electron transfer was occurring. These results demonstrated that the electrical contact between nanoparticle and electrode, which could be rather stochastic due to thermal motion and micro‐convection, played critical roles in regulating the multi‐peak behavior of single silver nanoparticles. In touch: surface plasmon resonance microscopy is utilized to monitor collision and oxidation processes of single silver nanoparticles. Simultaneous optical and electrochemical recordings reveal that nanoparticles often remain in physical touch with the electrode even though no electron transfer is occurring. The electrical contact plays critical roles in regulating the multi‐peak behavior of single silver nanoparticles. [ABSTRACT FROM AUTHOR]

Abstract: A novel microfluidic immunoassay system for specific detection of hemoglobin A1c (HbA1c) was developed based on a three-component shell/shell/core structured magnetic nanocomposite Au/chitosan/Fe3O4, which was synthesized with easy handling feature of Fe3O4 by magnet, high affinity for gold nanoparticles of chitosan and good immobilization ability for anti-human hemoglobin-A1c antibody (HbA1c mAb) of assembled colloidal gold nanoparticles. The resulting HbA1c mAb/Au/chitosan/Fe3O4 magnetic nanoparticles were then introduced into microfluidic devices coupled with a gold nanoband microelectrode as electrochemical detector. After that, three-step rapid immunoreactions were carried out in the sequence of HbA1c, anti-human hemoglobin antibodies (Hb mAb) and the secondary alkaline phosphatase (AP)-conjugated antibody within 20min. The current response of 1-naphtol obtained from the reaction between the secondary AP-conjugated antibody and 1-naphthyl phosphate (1-NP) increased proportionally to the HbA1c concentration. Under optimized electrophoresis and detection conditions, HbA1c responded linearly in the concentration of 0.05–1.5μgmL−1, with the detection limit of 0.025μgmL−1. This system was successfully employed for detection of HbA1c in blood with good accuracy and renewable ability. The proposed method proved its potential use in clinical immunoassay of HbA1c. [Copyright &y& Elsevier]

Abstract: An interesting mode of reactivity of MnO2 nanoparticles modified electrode in the presence of H2O2 is reported. The MnO2 nanoparticles modified electrodes show a bi-direction electrocatalytic ability toward the reduction/oxidation of H2O2. Based on this property, a choline biosensor was fabricated via a direct and facile electrochemical deposition of a biocomposite that was made of chitosan hydrogel, choline oxidase (ChOx) and MnO2 nanoparticles onto a glassy carbon (GC) electrode. The biocomposite is homogeneous and easily prepared and provides a shelter for the enzyme to retain its bioactivity. The results of square wave voltammetry showed that the electrocatalytic reduction currents increased linearly with the increase of choline chloride concentration in the range of 1.0×10−5 –2.1×10−3 M and no obvious interference from ascorbic acid and uric acid was observed. Good reproducibility and stability were obtained. A possible reaction mechanism was proposed. [Copyright &y& Elsevier]

Abstract: A novel film of chitosan-gold nanoparticles is fabricated by a direct and facile electrochemical deposition method and its application in glucose biosensor is investigated. HAuCl4 solution is mixed with chitosan and electrochemically reduced to gold nanoparticles, which can be stabilized by chitosan and electrodeposited onto glassy carbon electrode surfaces along with the electrodeposition of chitosan. Then a model enzyme, glucose oxidase (GOD) is immobilized onto the resulting film to construct a glucose biosensor through self-assembly. The resulting modified electrode surfaces are characterized with both AFM and cyclic voltammetry. Effects of chitosan and HAuCl4 concentration in the mixture together with the deposition time and the applied voltage on the amperometric response of the biosensor are also investigated. The linear range of the glucose biosensor is from 5.0×10−5 ∼1.30×10−3 M with a Michaelis–Menten constant of 3.5 mM and a detection limit of about 13 μM. [Copyright &y& Elsevier]

Abstract: A new strategy for immobilization of horseradish peroxidase (HRP) has been presented by self-assembling gold nanoparticles on chitosan hydrogel modified Au electrode. From a mildly acidic chitosan solution, a chitosan film is electrochemically deposited on Au electrode surface via a negative voltage bias. This process is accompanied by the hydrogen evolution reaction, and the released hydrogen gas made the deposited chitosan film with porous structure, which facilitates the assembly of gold nanoparticles and HRP. The resulting substrates were characterized by atomic force microscopy (AFM) and electrochemical impedance spectroscopy (EIS). The immobilized HRP displayed an excellent catalytic property to the reduction of H2O2 in the presence of methylene blue mediator. The resulting biosensor (HRP-modified electrode) showed a wide dynamic range of 8.0μM–15mM H2O2, and the linear ranges were 8.0μM–0.12mM and 0.50–12mM, with a detection limit of 2.4μM estimated at a signal-to-noise ratio of 3. Moreover, the biosensor remained about 85% of its original sensitivity after four weeks’ storage. [Copyright &y& Elsevier]