Search

Root rot is a highly infectious disease in traditional Chinese medicine (TCM) that spreads quickly and significantly affects the yield and quality of TCM. Therefore, there is an urgent need for accurate and convenient early warning technology to guide root rot control. The root rot of TCM is mainly caused by Fusarium fungi infecting plants. After plants have been infected with fungi, zearalenone (ZEN), fumonisin (FB), fusarium acid (FA), and other compounds will produce duo to Fusarium infects plants to promote metabolism. And the trace expression of these compounds in plants is used as root rot early warning markers (RREWM). Herein, an electrochemical immunosensor was developed for the rapid, convenient, and sensitive detection of zearalenone (ZEN), an early warning marker for Radix isatidis root rot. The immunosensor utilizes Fe3O4@g-C3N4 composite ITO electrode. Initially, the ITO conductive films were modified with Fe3O4@g-C3N4 and gold nanoparticles (AuNPs) through droplet coating and chemical deposition, respectively. Subsequently, the AuNPs were conjugated with zearalenone antibody (ZEN-Ab) to generate high affinity sulfhydryl-bound recognition elements. Under the optimized condition, the sensor demonstrates a linear wide range of 10.00 pg mL−1 to 1.20 × 104 pg mL−1 with a LOD of 3.86 pg mL−1. Additionally, the sensor showed good reproducibility and stability. This study exhibits a convenient, accurate, and low-cost method for detecting early warning markers of root rot in TCM cultivation, which was expected to provide a reliable warning technology for the early warning and prevention of diseases in the planting process of TCM. [ABSTRACT FROM AUTHOR]

Schematic representation of constructing CS-Fc@SPCE electrochemical immunosensor for the detection of cTnI. [Display omitted] • A label-free electrochemical immunosensor based on ferrocene derivatives amplified signal for cTnI detection was created. • A novel redox-active hybrid material, CS-Fc, which significantly increases the electron transfer rate. • The immunosensor showed excellent analytical performances in the assay of AMI warning biomarker – cTnI. As a biomarker of acute myocardial infarction (AMI), screening for cardiac troponin I (cTnI) has extremely high clinical sensitivity and specificity, and is extremely important for early intervention and risk assessment of AMI. Therefore, a novel redox-active hybrid material, CS-Fc, was synthesized by the Schiff base reaction of chitosan (CS) and ferrocene-carboxylic acid (Fc(COOH)) to form an amide group bonded together, which was used as a substrate-modified material for screen-printed carbon electrode (SPCE), and then assembled with an antibody (Ab), which was constructed into a label-free electrochemical immunosensor for the highly sensitive and rapid detection of cTnI in this study. The redox activity and biocompatibility of the highly stable and conductive composite CS-Fc significantly increased the effective specific surface area, electron transfer rate, and achieved effective amplification and specific analysis of the response signal. Under the optimized experimental conditions, the immunosensor showed a good linear relationship between its response signal and cTnI concentration in the range of 2.44 × 10−2 ∼ 2.50 × 101 ng mL−1, with a limit of detection (LOD) as low as 3.70 × 10−3 ng mL−1 (3σ, n = 11). Meanwhile, when used for the detection of cTnI in actual serum samples, it showed better reproducibility and stability, and the analytical results were better than those of the ELISA method, which indicated that it has a great potential for the accurate and rapid detection of cTnI in serum samples. In addition, it also provides a reliable means and scientific basis for process screening, early warning and prognostic risk assessment of AMI. [ABSTRACT FROM AUTHOR]

In this study, a novel electrochemical immunosensor for early screening of depression markers-heat shock protein 70 (HSP70) was successfully developed based on the porous graphene (PG) with huge specific surface area and excellent structure. Benefiting from the strong adsorption and good bioactivity of PG which was initially prepared via a simple pyrolysis process, a variety of heat shock protein70 (HSP70) can be firmly loaded on the PG to construct the basic electrode (HSP70/PG/GCE)，which was characterized by the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Due to the HSP70 fixed on the surface of basic electrode and the HSP70 in the samples can competitively combine with the horseradish peroxidase labeled human HSP 70 antibody (HRP-Strept-Biotin-Ab). As a result, it presented a negative correlation between the concentration of HSP70 in samples and the detection signal of the proposed electrochemical immunosensor (HRP-Strept-Biotin-Ab-HSP70/PG/GCE) in the test liquid. The application of PG with excellent electrical conductivity in construction of immunosensor remarkably improved the sensitivity of the immunosensor for detection of HSP70. The proposed immunosensor demonstrated a wide linear range of 0.0448 ~ 100 ng/mL with a low detection limit of 0.02 ng/mL at 3σ. Moreover, the proposed immunosensor could be applied for the sensitive and efficient detection of HSP70 in real samples with good precision, acceptable stability, reproducibility and satisfactory results. Therefore, the HSP70 immunosensor provides a novel and convenient method for early clinical screening of depression markers-heat shock protein 70. [ABSTRACT FROM AUTHOR]

A sensitively competitive electrochemical immunosensor for the detection of cortisol was successfully developed based on gold nanoparticles and magnetic functionalized reduced graphene oxide (AuNPs/MrGO). In order to construct the base of the immunosensor, the MrGO was initially fabricated by chemical cross-linking and used to modify the nafion pretreated glassy carbon electrode. Subsequently, the surface of electrode was modified by AuNPs via electrochemical deposition. A variety of cortisol (Cor) can be firmly loaded in the AuNPs/MrGO with large specific surface area and good bioactivity to construct the basic electrode (Cor/AuNPs/MrGO/Nafion@GCE), which was characterized by the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Due to the cortisol on the surface of basic electrode and samples can competitively combine with the cortisol antibody labelled by horseradish peroxidase (HRP-Strept-Biotin-Ab). Finally, the detection signal of electrochemical immunosensor (HRP-Strept-Biotin-Ab-Cor/AuNPs/MrGO/Nafion@GCE) in the test liquid had negative correlations with the concentration of cortisol in samples. The AuNPs/MrGO with excellent electrical conductivity being applied, the electrochemical response of the immunosensor was immensely amplified. The immunosensor displayed excellent analytical performance for the detection of cortisol range from 0.1 to 1000 ng/mL with a detection limit of 0.05 ng/mL at 3σ. Moreover, compared the developed immunoassay with commercially available enzyme linked immunosorbent assay, the proposed method showed good precision, acceptable stability and reproducibility, indicating the immunosensor could be used for the sensitive, efficient and real-time detection of cortisol in real samples. Therefore, the present strategy provides a novel and convenient method for clinical determination of cortisol. [ABSTRACT FROM AUTHOR]

Sleep debt (SD) is one of the important triggers for causing not only physiological and mental illness but also dangerous work. Therefore, achieving an early and objective assessment of SD is of great significance in the precaution against SD-related diseases and unsafe work. Here, an ultrasensitive electrochemical immunosensor was constructed for analysis of SD biomarker amyloid-β (A β). The gold nanoparticles/chitosan-coated polyaniline-functionalized activated carbon (AuNPs/AC@PANI@CS) composites were employed as the sensing platforms. Since PANI and AC can form an effective conductive path, it can effectively enhance the penetration of electrolytes on the electrode surface and the rapid transport of charges and ions, significantly enhancing the electrochemical response signal of the immunosensor. Under the optimized experimental conditions, the fabricated immunosensor had a wide linear range of 1.95 pg mL−1 to 1000.00 pg mL−1, with a low detection limit of 0.014 pg mL−1. This study not only provides an effective method for the accurate and rapid detection of A β , but also offers a novel evaluation strategy for the objective assessment of SD and the study of related pathological mechanisms. AuNPs/AC@PANI@CS signal amplified electrochemical immunosensor for sensitive detection of amyloid-β (Aβ). [Display omitted] • A highly sensitive and selective electrochemical immunosensor for the determination of amyloid-β (A β) was fabricated. • The prepared AC@PANI with a large specific surface area, excellent electrical conductivity and structure can amplify the signal of the immunosensor. • The proposed immunosensor can be used to sensitively and efficiently analyze A β in serum samples. • This method would provide an effective method for the objective assessment of sleep debt. [ABSTRACT FROM AUTHOR]

Developing wearable flexible biosensors with excellent electrical conductivity and outstanding flexibility simultaneously for disease diagnosis and health monitoring is a current hot topic in the field of sensor research. In this study, nitrogen-doped graphene (N-Gr) and gold nanoparticles (AuNPs) were successively deposited onto ITO-PET flexible conductive films by chemical deposition, and then a flexible electrochemical immunosensor with high sensitivity and selectivity was constructed for detecting depression markers by exploiting the high affinity between AuNPs and the sulfhydryl groups of depression marker (DM) antibody. Due to the composite of N-Gr, AuNPs and ITO-PET, the prepared flexible sensor can maintain a relatively stable electrical signal response regardless of the deformation such as spiral, rolling, and bending, without shedding or fracture of the N-Gr and AuNPs, and can also significantly amplify the electrochemical response signal of the immunosensor. Under optimized experimental conditions, the fabricated immunosensor showed good linearity over a wide range of 0.023–300.00 ng/mL with a low detection limit of 0.010 ng/mL (3σ, n = 5), when it was used for the determination of depression markers-human Apo-A4 in 100% whole serum samples. The flexibility of the constructed immunosensor and the stability and sensitivity of biomolecular analysis are expected to be further made into implantable depression marker in-situ monitoring probe with the help of micro-machining technology, which will develop a promising method for objective, efficient and accurate clinical diagnosis of depression. Schematic representation of constructing AuNPs@N-Gr@ITO-PET-based electrochemical immunosensor for determination of apolipoprotein A4 (Apo-A4). [Display omitted] • A highly sensitive and selective flexible immunosensor for determination of human apolipoprotein A4 (Apo-A4) has been fabricated. • The prepared AuNPs@N-Gr with large specific surface area, excellent electrical conductivity and outstanding flexibility can amplify the signal of immunosensor. • The proposed immunosensor can be used to sensitively and efficiently analyze apolipoprotein A4 (Apo-A4) in serum samples. • This method would provide a promising potential in early clinical screening and diagnosis of depression. [ABSTRACT FROM AUTHOR]

• ZIF-8@N-Gr with excellent performance was prepared. • ZIF-8@N-Gr can be used in immunosensor development for Apo-A4 detection. • Lower limit of detection and wider linear range than ELISA kit. • Determination of Apo-A4 in plasma with no need for sample treatment. The fabrication of electrochemical biosensors to directly, rapidly and ultrasensitively detect disease markers in urine or blood samples has become a new and competitive challenge in the field of sensor research. In this paper, a novel electrochemical immunosensor with high selectivity and sensitivity for the detection of the depression marker human apolipoprotein A4 (Apo-A4) was successfully constructed using zeolite imidazole ester metal organic skeleton-nitrogen doped graphene composites (ZIF-8@N-Gr). To this end, because of the higher surface area and biocompatibility, ZIF-8 with abundant biomolecular binding sites provided a good microenvironment for effectively immobilizing antigens. ZIF-8@N-Gr presented a flake structure, as the electrode displayed excellent electrical conductivity, which enhanced the electron transfer and significantly amplified the current signal of the immunosensor. More importantly, these immunosensors are capable of assaying human apolipoprotein A4 (Apo-A4) in 100% serum without suffering from any significant biological interference. Under optimized experimental conditions, the sensor was used for the analysis of whole serum samples and presented a wide linear range from 1.47 × 10−10 g/mL to 3.00 × 10−7 g/mL with a low detection limit of 8.33 × 10−11 g/mL (3σ, n = 15). The satisfactory results of human serum sample analysis indicated that the proposed immunosensor had promising potential in the clinical diagnosis of depression. [ABSTRACT FROM AUTHOR]

Leptin is a vital biomarker of non-alcoholic fatty liver (NAFLD), and its evaluation of the concentration level in vivo is of great significance to NAFLD diagnosis. Therefore, it is pressing to develop a method for rapid and sensitive detection of leptin. This paper describes an environmentally friendly and label-free immunosensor based on porous graphene functionalized black phosphorus (PG-BP) composite to detect of leptin. The PG-BP was synthesized via strong coherent coupling between porous graphene (PG) surface plasmons and anisotropic black phosphorus (BP) localized surface plasmons, which made the electrochemical performance of PG and BP synergistic as well as increased the stability and conductive capability of BP material. The PG-BP modified electrodes was further prepared by gold nanoparticles, cysteamine, and glutaraldehyde in turn. Due to the cross-linking effect of glutaraldehyde, anti-leptin can be firmly fixed. These properties of the platform improved the conductive capability of the immunosensor and enhanced the load capacity of the proteins, thereby, the sensitivity of the immunosensor was significantly increased. Under the optimal conditions, the proposed immunosensor exhibited a wide linear range of 0.150–2500 pg/mL with a low detection limit of 0.036 pg/mL. The leptin immunosensor displayed excellent selectivity and anti-interference ability, which could be used for early screening and diagnosis of clinical NALFD. • A BSA/anti-leptin/Glu/Cys/AuNPs/PG-BP/GCE immunosensor was successfully fabricated. • The proposed immunosensor was successfully used for the detection of leptin with a wide range of detection and low detection limits. • The immunosensor can be used for the sensitive, efficient and real-time analysis of leptin in real samples. • The immunosensor is expected to provide a reliable, real-time and convenient method for clinical trials of NAFLD markers. [ABSTRACT FROM AUTHOR]