Search

An electrochemical sensor has received much attention due to its importance for early infection identification, hinting at its critical relevance in diagnostic applications. For the detection of field-isolated strains of Pasteurella multocida, this paper reports the development and fabrication of a DNA-based electrochemical biosensor by integrating zinc oxide (ZnO) nanorods (NRs) into an electrochemical paper-based analytical device (ePAD). One significant improvement over the state-of-the-art features of the sensor is the using paper, an economically viable substrate that can be manufactured in large numbers. These sensors, being categorized under precision instruments with an ecologically friendly design, are ideal for mass production of eco-sensitive substrates. The biosensor is more sensitive and specific as compared to the conventional PCR-based sensing techniques. Moreover, the biosensor exploits the inherent properties of ZnO-NRs to amplify the signal output, whereas ePAD limits detection cost. In addition, a probe targeting the KMT gene of P. multocida was first characterized using conventional PCR and then immobilized onto the ZnO nanorods-modified ePAD surface, which improved the biosensor's ability for the rapid and selective genetic material of the pathogen detection. In addition, the sensor was validated using the methods of Cyclic Voltammetry (CV) and Linear Sweep Voltammetry (LSV). The reported biosensor it provides Linear Response of 0.001-10 μg/ml with LOD 0.001 μg/ml within a response time of 30 s. Subsequently, the biosensor reveals fast kinetics of the reaction as a powerful tool for timely and accurate diagnostics, pointing to its contribution to further development in biosensing technologies in the diagnostic area of infectious diseases at hospitals and clinics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Medical devices have progressed from their initial bulky forms to smart devices. However, their rigidity hampers their seamless integration into everyday life. The fields of stretchable, textile, and flexible electronics are emerging research areas with the potential to drive significant technological progress. This research presents a laboratory-based technique to produce highly sensitive and flexible biosensors for detecting the chikungunya virus. These biosensors are based on 0D nanomaterials and demonstrate significant advancements in voltammetry. The electrochemical platform was created utilizing the stencil printing (StPE) technique. Adapting the biosensor setup involved the selection of aptamer as the biorecognition element bound with silver nanoparticles (AgNPs). This biosensor was employed in the voltammetric identification of the Chikungunya virus antigen (CHIKV-Ag) within a solution containing 0.5 mM potassium ferro/ferri cyanide, a redox pair. The biosensor was employed to evaluate CHIKV-Ag within a human serum sample. It demonstrated a linear detection span ranging from 0.1 ng/mL to 1 μg/mL, with a detection limit of 0.1 ng/mL for CHIKV-Ag. The proposed approach, due to its flexibility in production and the electrocatalytic attributes displayed by the zero-dimensional nanostructure, presents innovative opportunities for cost-effective and tailored aptamer-based bioelectronics, thereby broadening the scope of this domain.

This paper reports an electrochemical paper analytical device (EPAD) for detection of recreational drug; methylenedioxymethamphetamine (MDMA). MDMA is used as an addictive narcotic by youth and there is an urgent need to detect this drug as it is a potential neurotoxic agent. The proposed EPAD represents many advantageous features of being simple, low-cost, consistent and disposable. The working electrode of the EPAD features zinc oxide nanorods (ZnONRs). The morphological, optical, elemental composition and phase analysis of the synthesized ZnONRs has been characterized by field emission scanning electron microscopy (FESEM), UV-Vis spectroscopy, energy dispersive X-ray spectroscopy (EDAX), photo-luminescence (PL) and X-ray diffraction (XRD). The developed sensor showed optimum response at 7.0 pH and wide linear range of 1 µM-1 mM with a low detection limit of 0.1 µM for MDMA. Evaluation of the sensor also revealed best results in terms of analytical recovery (95%) and accuracy (95%). The designed EPAD could prove to be very effective in case of forensic diagnostic applications. This work provides a reliable diagnostic method for remote areas with limited resources, and will also help people who cannot afford expensive medical tests and have limited access to power and trained personnel.

In the present work, a comparative study was performed between single-walled carbon nanotubes and multi-walled carbon nanotubes coated gold printed circuit board electrodes for glucose detection. Various characterization techniques were demonstrated in order to compare the modified electrodes viz. cyclic voltammetry, electrochemical impedance spectroscopy and chrono-amperometry. Results revealed that single-walled carbon nanotubes outperformed multi-walled carbon nanotubes and proved to be a better sensing interface for glucose detection. The single-walled carbon nanotubes coated gold printed circuit board electrodes showed a wide linear sensing range (1 mM to 100 mM) with detection limit of 0.1 mM with response time of 5 s while multi-walled carbon nanotubes coated printed circuit board gold electrodes showed linear sensing range (1 mM to 100 mM) with detection limit of 0.1 mM with response time of 5 s. This work provided low cost sensors with enhanced sensitivity, fast response time and reliable results for glucose detection which increased the affordability of such tests in remote areas. In addition, the comparative results confirmed that single-walled carbon nanotubes modified electrodes can be exploited for better amplification signal as compared to multi-walled carbon nanotubes., (Copyright © 2018. Published by Elsevier B.V.)

The present study was aimed to develop "fluorine doped" tin oxide glass electrode with a MoSe2 nano-urchin based electrochemical biosensor for detection of Escherichia. coli Shiga toxin DNA. The study comprises two conductive electrodes, and the working electrodes were drop deposited using MoSe2 nano-urchin, and DNA sequences specific to Shiga toxin Escherichia. coli. Morphological characterizations were performed using Fourier transforms infrared spectrophotometer; X-ray diffraction technique and scanning electron microscopy. All measurements were done using methylene blue as an electrochemical indicator. The proposed electrochemical geno-sensor showed good linear detection range of 1 fM⁻100 μM with a low detection limit of 1 fM where the current response increased linearly with Escherichia. coli Shiga toxin dsDNA concentration with R2 = 0.99. Additionally, the real sample was spiked with the dsDNA that shows insignificant interference. The results revealed that the developed sensing platform significantly improved the sensitivity and can provide a promising platform for effective detection of biomolecules using minute samples due to its stability and sensitivity., Competing Interests: The authors declare no conflict of interest.

Development of platforms for a reliable, rapid, sensitive and selective detection of chikungunya virus (CHIGV) is the need of the hour in developing countries. To the best of our knowledge, there are no reports available for the electrochemical detection of CHIGVDNA. Therefore, we aim at developing a biosensor based on molybdenum disulphide nanosheets (MoS 2 NSs) for the point-of-care diagnosis of CHIGV. Briefly, MoS 2 NSs were synthesized by chemical route and characterized using scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopy, Raman spectroscopy and X-Ray Diffraction. MoS 2 NSs were then subjected to physical adsorption onto the screen printed gold electrodes (SPGEs) and then employed for the detection of CHIGV DNA using electrochemical voltammetric techniques. Herein, the role of MoS 2 NSs is to provide biocompatibility to the biological recognition element on the surface of the screen printed electrodes. The detection strategy employed herein is the ability of methylene blue to interact differentially with the guanine bases of the single and double-stranded DNA which leads to change in the magnitude of the voltammetric signal. The proposed genosensor exhibited a wide linear range of 0.1 nM to 100 µM towards the chikungunya virus DNA.

An electrochemical genosensor based on Zinc oxide/platinum-palladium (ZnO/Pt-Pd) modified fluorine doped tin oxide (FTO) glass plate was fabricated for detection of consensus DNA sequence of Dengue virus (DENV) using methylene blue (MB) as an intercalating agent. To achieve it, probe DNA (PDNA) was immobilized on the surface of ZnO/Pt-Pd nanocomposites modified FTO electrode. The synthesized nano-composites were characterized by high resolution transmission electron microscopy (HRTEM), energy dispersive X-ray analysis (EDX), atomic force microscopy (AFM), scanning electron microscopy (SEM), UV-Vis spectroscopy, X-ray diffraction (XRD) analysis and Fourier transform infra-red (FTIR) spectroscopy. This PDNA modified electrode (PDNA/ZnO/Pt-Pd/FTO) served as a signal amplification platform for the detection of the target hybridized DNA (TDNA). The hybridization between PDNA and TDNA was detected by reduction in current, generated by interaction of anionic mediator, i.e., methylene blue (MB) with free guanine (3'G) of ssDNA. The sensor showed a dynamic linear range of 1 × 10 -6 M to 100 × 10 -6 M with LOD as 4.3 × 10 -5 M and LOQ as 9.5 × 10 -5 M. Till date, majorly serotype specific biosensors for dengue detection have been developed. The genosensor reported here eliminates the possibility of false result as in case of serotype specific DNA sensor. This is the report where conserved sequences present in all the serotypes of Dengue virus has been employed for fabrication of a genosensor., (Copyright © 2017 Elsevier B.V. All rights reserved.)

We describe herein the fabrication of an electrochemical microfluidic paper based device (EμPAD) for the detection of diazepam, a sedative, anxiety-relieving and muscle-relaxing drug. To achieve it, silica coated gold nanorods (Si@GNRs) were synthesized and drop casted on an electrochemical microfluidic paper based device (EμPAD) for the detection of diazepam. The synthesized composites were characterized by recording its images in scanning electron microscope (SEM) and transmission electron microscope (TEM). The experimental results confirmed that Si@GNRs had good electrocatalytic activity towards diazepam. The modified paper based electrode showed a stable electrochemical response for diazepam in the concentration range of 3.5 nM to 3.5 mM. EμPAD offers many advantageous features such as facile approach, economical and have potential for commercialization. Si@GNRs modified EμPAD was also employed for determination of diazepam in spiked human urine samples. Reported facile lab paper approach integrated with Si@GNRs could be well applied for the determination of serum metabolites., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The present study was aimed to develop an ultrasensitive technique for electroanalysis of ketamine; a date rape drug. It involved the fabrication of nano-hybrid based electrochemical micro fluidic paper-based analytical device (EμPADs) for electrochemical sensing of ketamine. A paper chip was developed using zeolites nanoflakes and graphene-oxide nanocrystals (Zeo-GO). EμPAD offers many advantages such as facile approach, economical and potential for commercialization. Nanocrystal modified EμPAD showed wide linear range 0.001-5nM/mL and a very low detection limit of 0.001nM/mL. The developed sensor was tested in real time samples like alcoholic and non-alcoholic drinks and found good correlation (99%). The hyphenation of EμPAD integrated with nanocrystalline Zeo-GO for detection of ketamine has immense prospective for field-testing platforms. An extensive development could be made for industrial translation of this fabricated device., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Nanocrystals of zeolites (Nanocrys Zeo) and Multi-walled carbon nanotubes (MWCNT) based diagnostic genosensor was employed for detection of polymerase chain (PCR) amplified HBVDNA in blood of hepatitis B patients. The ssDNA-nanocomposite modified electrode was characterized by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). The hybridization between ss DNA probe and target ss DNA was detected by reduction in current, generated by interaction of methylene blue (MB) with free guanine (3'G) of ssDNA. Nanocrys zeo were deposited on the Fluorine doped tin oxide glass electrode (FTO) by drop-casting method for better immobilization of ss DNA while MWCNTs are incorporated into the zeolite-assembly to enhance the electro-conductivity of the present genosensor. The ssDNA-nanocomposite modified FTO electrode exhibited optimum current within 5s, at pH 5.6, and incubation temperature of 45°C. The value of charge transfer resistance (Rct) was linear with the number of copies of target DNA between 150 and 10(6) copies/ml. The limit of detection (LOD) of the sensor was 50 copies/ml. Within and between batches coefficients of variation (CV) were 2.5% and 3.2% respectively. Results obtained with our genosensor were also correlated with those by RT-PCR and r(2) value found with good accuracy of 97%. The electrode was reused by dipping it into 0.1M NaOH for 3min and lost 50% of its initial activity in 4 weeks. Furthermore the technique employed for detection of HBV is EIS, which is convenient and required less analysis time., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Zinc oxide nanocrystals-methylene blue nanocomposites were developed by electrodeposition of methylene blue onto the thin films of zinc oxide nanocrystals deposited onto SnO2/F coated glass substrates for in vitro sensing of anti-thalassemic drug i.e. deferiprone. Detailed morphological, electrochemical, structural and optical characterizations of ZnONC-MB/FTO electrode were done using XRD, SEM, EIS, FTIR, LSV, and CV and show quick response time (within 5 s), linearity as 1 × 10(-3) to 10(3) μM and shelf life of about 10 weeks under refrigerated conditions. Attempts have been made to utilize this electrode for estimation of deferiprone in urine samples. The developed sensor exhibited high reproducibility and good storage stability., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In present work, gold nanorods were used for amplification of electrochemical sensing of anti-HIV replication drug i.e. deferiprone. Gold nanorods (nano Au) deposited onto pencil graphite electrode (PGE) has been utilized for covalent immobilization of horse radish peroxidase (HRP), via glutaraldehyde (Glu), for deferiprone detection using impedimetric technique. Gold nanorods (nano Au) prepared were characterized by TEM and XRD. The resulting nano Au sensor exhibited a good response to deferiprone with a wide linear range (0.005-1000µM) and a low detection limit 0.005µM. The biosensor also showed a short response time (within 15s). In addition, the biosensor exhibited high reproducibility, good storage stability and anti-interference ability. The applicability of the nano Au sensor is to determine deferiprone level in spiked urine and serum samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A method is described for the construction of a highly sensitive amperometric sensor for the detection of tyrosine, employing a magnetic nanoparticles-zinc oxide/zinc hexacyanoferrate (Fe3O4NP-ZnO/ZnHCF) hybrid film electrodeposited on the surface of a Pt electrode as working electrode. The sensor is based on electrocatalytic mechanism initiated by electrochemical oxidation of the reduced form of the hybrid film at +0.2 V vs. Ag/AgCl followed by completion of chemical oxidation of tyrosine. The sensor showed optimum response within 2 s at pH 2. The working/linear range of the sensor was 0.02-2.76 mM with a detection limit of 4 μM. The sensor measured tyrosine level in serum, a potential biomarker of phenylketonuria. The working electrode lost only 5 % of its initial activity, when stored at 4 °C, after its regular use over a period of 100 days.

A bienzymatic choline biosensor was constructed by coimmobilizing acetylcholinesterase (AChE) and choline oxidase (ChO) onto nanocomposite of carboxylated multiwalled carbon nanotubes (c-MWCNTs) and zirconium oxide nanoparticles (ZrO(2)NPs) electrodeposited on the surface of a glassy carbon electrode (GCE) and using it (AChE-ChO/c-MWCNT/ZrO(2)NPs/GCE) as working electrode, Ag/AgCl as reference electrode, and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and cyclic voltammetry (CV) studies, optimized, and evaluated. The biosensor exhibited optimum response within 4 s at +0.2V, pH 7.4, and 25 °C. The detection limit and working range of the biosensor were 0.01 μM and 0.05 to 200 μM, respectively. The half-life of the enzyme electrode was 60 days at 4 °C. The serum choline level, as measured by the biosensor, was 9.0 to 12.8 μmol/L (with a mean of 10.81 μmol/L) in apparently healthy persons and 5.0 to 8.4 μmol/L (with a mean of 6.53 μmol/L) in persons suffering from Alzheimer's disease. The enzyme electrode was unaffected by a number of serum substances., (Copyright © 2012 Elsevier Inc. All rights reserved.)

A method is described for construction of a novel amperometric triglyceride (TG) biosensor based on covalent co-immobilization of lipase, glycerol kinase (GK) and glycerol-3-phosphate oxidase (GPO) onto chitosan (CHIT) and zinc oxide nanoparticles (ZnONPs) composite film deposited on the surface of Pt electrode. The enzymes-ZnONPs-CHIT composite was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The sensor showed optimum response within 6s at pH 7.5 and temperature of 35°C. The sensor measures current due to electrons generated at 0.4V against Ag/AgCl from H(2)O(2), which is produced from triolein by co-immobilized enzymes. A linear relationship was obtained between a wide triolein concentration range (50-650 mg/dl) and current (mA) under optimum conditions. The biosensor showed high sensitivity, low detection limit (20 mg/dl) and good storage stability (half-life of 7 months at 4°C). The biosensor was unaffected modified by a number of serum substances at their physiological concentrations. The biosensor was evaluated and employed for determination of TG in sera in apparently healthy subjects and persons suffering from hypertriglyceridemia., (Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.)

Objectives: A method is described for construction of an amperometric triglyceride (TG) biosensor using PVA membrane bound enzymes., Design and Methods: A mixture of commercial lipase, glycerol kinase, glycerol-3-phosphate oxidase and horseradish peroxidase was co-immobilized onto polyvinyl alcohol (PVA) membrane through glutaraldehyde coupling. The biosensor measures current when polarized at 0.4 V., Results: The sensor showed optimum response within 2 s at pH 7.0 and 25 degrees C. The current (mA) was in proportion to concentration of TG in the range 0.56-2.25 mM. The minimum detection limit of the method was 0.21 mM. The analytic recovery of added TG was 94.3%. Within batch and between batch coefficients of variations (CV) were <5.85% and <4.13%, respectively. A good correlation (r=0.99) was found. Among various serum substances tested, only cholesterol caused slight stimulation (20%)., Conclusions: An amperometric method was developed for determination of TG employing this enzyme electrode., (Copyright 2009 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.)