Search

Sodium (Na) metal batteries (SMBs) using Na anode are potential “beyond lithium” electrochemical technology for future energy storage applications. However, uncontrollable Na dendrite growth has plagued the application of SMBs. Understanding Na deposition mechanisms, particularly the early stage of Na deposition kinetics, is critical to enable the SMBs. In this context, we conducted in situ observations of the early stage of electrochemical Na deposition. We revealed an important electrochemical Ostwald ripening (EOR) phenomenon which dictated the early stage of Na deposition. Namely, small Na nanocrystals were nucleated randomly, which then grew. During growth, smaller Na nanocrystals were contained by bigger ones via EOR. We observed two types of EOR with one involving only electrochemical reaction driven by electrochemical potential difference between bigger and smaller nanocrystals; while the other being dominated by mass transport governed by surface energy minimization. The results provide new understanding to the Na deposition mechanism, which may be useful for the development of SMB for energy storage applications.

High interfacial resistance and uncontrollable lithium (Li) dendrite are major challenges in solid-state Li-metal batteries (SSLMBs), as they lead to premature short-circuiting and failure of SSLMBs. Here, we report the synthesis of a composite anode comprising a three-dimensional LiCux nanowire network host infiltrated with Li (Li* anode) with low interfacial impedance and superior electrochemical performance. The Li* anode is fabricated by dissolving Cu foil into molten Li followed by solidification. The Li* anode exhibits good wettability with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) and high mechanical strength, rendering low Li*/LLZTO interfacial impedance, homogeneous deposition of Li, and suppression of Li dendrites. Consequently, the Li* anode-based symmetric cells and full cells with LiNi0.88Co0.1Al0.02O2 (NCA), LiFePO4 (LFP), and FeF2 cathodes deliver remarkable electrochemical performance. Specifically, the Li*/LLZTO/Li* symmetrical cell achieves a remarkably long cycle lifetime of 10 000 h with 0.1 mA·cm-2; the Li*/LLZTO/NCA full cell maintains capacity retention of 73.4% after 500 cycles at 0.5C; and all-solid-state Li*/LLZTO/FeF2 full cell achieves a reversible capacity of 147 mAh·g-1 after 500 cycles at 100 mA·g-1. This work demonstrates potential design tactics for an ultrastable Li*/garnet interface to enable high-performance SSLMBs.

We report real time imaging of the oxygen reduction reactions (ORRs) in all solid state sodium oxygen batteries (SOBs) with CuO nanowires (NWs) as the air cathode in an aberration-corrected environmental transmission electron microscope under an oxygen environment. The ORR occurred in a distinct two-step reaction, namely, a first conversion reaction followed by a second multiple ORR. In the former, CuO was first converted to Cu2O and then to Cu; in the latter, NaO2 formed first, followed by its disproportionation to Na2O2 and O2. Concurrent with the two distinct electrochemical reactions, the CuO NWs experienced multiple consecutive large volume expansions. It is evident that the freshly formed ultrafine-grained Cu in the conversion reaction catalyzed the latter one-electron-transfer ORR, leading to the formation of NaO2. Remarkably, no carbonate formation was detected in the oxygen cathode after cycling due to the absence of carbon source in the whole battery setup. These results provide fundamental unde...

Lithium metal is an ideal anode for next-generation lithium batteries owing to its very high theoretical specific capacity of 3860 mAh g-1 but very reactive upon exposure to ambient air, rendering it difficult to handle and transport. Air-stable lithium spheres (ASLSs) were produced by electrochemical plating under CO2 atmosphere inside an advanced aberration-corrected environmental transmission electron microscope. The ASLSs exhibit a core-shell structure with a Li core and a Li2 CO3 shell. In ambient air, the ASLSs do not react with moisture and maintain their core-shell structures. Furthermore, the ASLSs can be used as anodes in lithium-ion batteries, and they exhibit similar electrochemical behavior to metallic Li, indicating that the surface Li2 CO3 layer is a good Li+ ion conductor. The air stability of the ASLSs is attributed to the surface Li2 CO3 layer, which is barely soluble in water and does not react with oxygen and nitrogen in air at room temperature, thus passivating the Li core.