Search

In the recently researched Sn-contained perovskite solar cells (PSCs), limited work is focused on corrosion of a metal electrode, which is recognized as the obstacle of efficient and stable devices. Here, it is found that a pure Sn based PSC shows the most serious and quick corrosion of an Ag electrode, compared with Pb and Sn–Pb PSCs. I2, SnOX, and AgI are the main products of the aged Ag electrode in Sn based PSCs, which greatly differed from Pb and Sn–Pb PSCs. Oxidation of FASnI3 under O2/H2O produces aggressive I2, together with gaseous FA and diffusive I−, degrading the PVK film and Ag electrode greatly. This work highlights the corrosion velocity and mechanism of Ag electrodes in Sn-contained PSCs, which may help to find out possible solutions to circumvent the instable issue. [ABSTRACT FROM AUTHOR]

Silver nanowire (Ag NW)-based transparent back electrodes prepared via all solution-process are promising for bifacial and semitransparent perovskite solar cells (PSCs). However, the inadequate electrical contact between the silver nanowires themselves and the contact with substrate leads to reduced overall solar cell performance; meanwhile, serious corrosion of Ag NW in ambient environment restricting the further applications. In this work, polyvinylpyrrolidone (PVP) as a binder in Ag NW electrode significantly enhances the conductivity and transparency at the same time improving the interface electric contact. The PSC with PVP modified Ag NW electrode demonstrated frontside and backside efficiency approaching 18 % and 14.1 % (AM1.5, 1 Sun), respectively, which achieves 82 % efficiency with normal Ag device and bifacial factor of 79 %. The long-term storage stability of PSC is also improved by PVP protection. The final device structure is ITO/Ni O x /MeO/(FA0.92MA0.08)0.95Cs0.05Pb(I0.9Br0.1)3/PEAI/PC61BM/BCP/ Ag NW. This work highlights the method to fabricate robust transparent Ag NW electrode for bifacial perovskite solar cells. • Polyvinylpyrrolidone (PVP) in Ag nanowire (Ag NW) electrode significantly enhances the conductivity and transparency. • PVP modified Ag NW electrode improves the interface electric contact and charge transport of the solar cell. • The Perovskite solar cell (PSC) with PVP modified Ag NW electrode demonstrated high efficiency and bifacial factor. • The long-term storage stability of PSC is also improved by PVP protection. [ABSTRACT FROM AUTHOR]

CH3NH3PbI3 perovskite films with full coverage and negligible roughness have been obtained by the two-step sequential thermal evaporation (TSSTE) process, which are further applied to fabricate thin-film transistors (TFTs). To gain the optimal electrical characteristics in our TFTs, the effect of the evaporation amount of PbI2 on the crystallization and thickness of CH3NH3PbI3 films is studied during the process of TSSTE. As a result, we demonstrate a thin-film field-effect transistors possessing a hole field-effect mobility of 3.55 cm2 V− 1 s− 1 as well as on/off ratio greater than 105 with the optimal CH3NH3PbI3 films as the channel layer. Through a further comparative analysis, MoO3 buffer layer is inserted between the perovskite channel layer and the source-drain electrode to improve the contact resistance of TFTs. As an understanding of device mechanism, a fact that insertion of MoO3 buffer layer into the Au/perovskite interface significantly reduced the contact resistance from 705 to 0.2 kΩ cm is unveiled. By inserting MoO3 buffer layer, the hole field-effect mobility of the CH3NH3PbI3 organic-inorganic hybrid TFTs can reach to 7.47 cm2 V− 1 s− 1. [ABSTRACT FROM AUTHOR]