Search

Parasitic mutual inductance between capacitors is critical for the high-frequency performance of electromagnetic interference filter. In this article, a new cancelation method is proposed to eliminate mutual inductance completely without adding additional components. The principle of the cancelation method is to design the layout of input and output traces, and the mutual coupling of traces can be equivalent to adding a negative inductance on the transfer branch of the filter to cancel the mutual inductance between capacitors. The two cancelation designs of the filters with small and large capacitor spacing are proposed, respectively. Then, the filter model is established in the finite-element method analysis tool, and the mutual inductances under different layout parameters are calculated to explore the recommended layout, which is to make the negative mutual inductance of traces fully offsets the positive mutual inductance between capacitors. Finally, the effectiveness of cancelation method and the accuracy of model are verified by experiments. The method can significantly improve the filter performance without extra costs and is expected to become a filter design that can be widely promoted. [ABSTRACT FROM AUTHOR]

Insulated gate bipolar transistor (IGBT) has been widely used in the voltage-source-converter-based high-voltage direct current (VSC-HVDC). However, the electromagnetic interference (EMI) generated by its fast switching process affects the normal operation of the surrounding power equipment. The switching voltage and current of IGBT are the main sources of EMI. Different driving circuit parameters result in different IGBT switching characteristics. In this article, the switching model of IGBT is introduced first and the influence of driving parameters on EMI sources is analyzed. Based on the conducted EMI experiment platform of an IGBT module, the time-domain waveforms of switching voltage and current under different driving parameters are obtained and compared with the model. Then the interference voltage spectrums are measured by an EMI receiver under different driving parameters. The influence of driving parameters on conducted EMI in 0.15–30 MHz is then analyzed and explained by combining the result of time domain and frequency domain. This article comprehensively analyzes the relationship between driving parameters and EMI sources and summarizes the influence characteristics of driving parameters on common-mode (CM) and differential-mode (DM) noise. The conclusions can help the parameters design of driving board, which can effectively reduce the conducted EMI of the converter. [ABSTRACT FROM AUTHOR]