Search

The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Transition Edge Sensors) on SiNx membrane with gold absorbers. Considering the large number of pixels and an event rate of about 300 Hz/pixel, a large multiplexing factor and a large bandwidth are needed. To fulfill this requirement, HOLMES will exploit recent advances in microwave multiplexing. In this contribution, we present the status of the activities in development, the performances of the developed microwave-multiplexed readout system, and the results obtained with the detectors specifically designed for HOLMES in terms of noise, time, and energy resolutions

HOLMES is an experiment aiming at performing a direct measurement of the neutrino mass from the electron capture (EC) spectrum of $$^{163}\hbox {Ho}$$. In order to reach a sensitivity of the order of $$\sim $$1 eV/c$$^2$$ on the neutrino mass, it is necessary to gather as many as $$10^{13}$$ events in the 3-year projected live time of HOLMES, keeping the pileup fraction as low as $$10^{-4}$$. This is not a trivial matter when it comes to low- temperature calorimeters, which usually have a rather slow time response. At the same time, a large number of detectors need to be operated simultaneously, and hence, in order to avoid an extremely large cryogenic facility, multiplexing is required. In this contribution, I will outline the current status and perspective of HOLMES, with special care devoted to the detectors and readout system, which have currently reached their target performance.

International audience; The absolute neutrino mass is still an unknown parameter in the modern landscape of particle physics. The HOLMES experiment aims at exploiting the calorimetric approach to directly measure the neutrino mass through the kinematic measurement of the decay products of the weak process decay of $^{163}$Ho. This low energy decaying isotope, in fact, undergoes electron capture emitting a neutrino and leaving the daughter atom, $^{163}$Dy$^*$, in an atomic excited state. This, in turn, relaxes by emitting electrons and, to a considerably lesser extent, photons. The high-energy portion of the calorimetric spectrum of this decay is affected by the non-vanishing neutrino mass value. Given the small fraction of events falling within the region of interest, to achieve a high experimental sensitivity on the neutrino mass, it is important to have a high activity combined with a very small undetected pileup contribution. To achieve these targets, the final configuration of HOLMES foresees the deployment of a large number of $^{163}$Ho ion-implanted TESs characterized by an ambitiously high activity of 300 Hz each. In this paper, we outline the status of the major tasks that will bring HOLMES to achieve a statistical sensitivity on the neutrino mass as low as 2 eV/c$^2$.

We present the first performance results obtained with microwave multiplexed Transition Edge Sensors prototypes specifically designed for the HOLMES experiment, a project aimed at directly measuring the electron neutrino mass through the calorimetric measurement of the $$^{163}$$ Ho electron capture spectrum. The detectors required for such an experiment feature a high energy resolution at the Q–value of the transition, around $$\sim $$ 2.8 keV, and a fast response time combined with the compatibility to be multiplexed in large arrays in order to collect a large statistics while keeping the pile-up contribution as small as possible. In addition, the design has to be suitable for future ion-implantation of $$^{163}$$ Ho. The results obtained in these tests allowed us to identify the optimal detector design among several prototypes. The chosen detector achieved an energy resolution of (4.5 ± 0.3) eV on the chlorine K $$_\alpha $$ line, at $$\sim $$ 2.6 keV, obtained with an exponential rise time of 14 $$\upmu $$ s. The achievements described in this paper pose a milestone for the HOLMES detectors, setting a baseline for the subsequent developments, aiming to the actual ion-implantation of the $$^{163}$$ Ho nuclei. In the first section the HOLMES experiment is outlined along with its physics goal, while in the second section the HOLMES detectors are described; the experimental set-up and the calibration source used for the measurements described in this paper are reported in Sects. 3 and 4, respectively; finally, the details of the data analysis and the results obtained are reported in Sect. 6.

The HOLMES project aims to directly measure the ν mass down to the eV scale using the electron capture decay (EC) of 163Ho. It will perform a precise calorimetric measurement of the end-point of the Ho energy spectrum looking for the deformation caused by a finite ν mass. The choice of 163Ho as source is driven by the very low Q-value of the EC reaction, which allows for high sensitivity with low activities (O(10 2 )Bq/detector), thus reducing the pile-up probability. A large array made by thousands of transition edge sensors based micro-calorimeters will be used. The calorimetric approach eliminates systematic uncertainties arising from the use of an external β source, and minimizes the effect of the atomic de-excitation process. The commissioning of the first implanted sub-array is scheduled for the end of 2018. It will provide useful data about the EC decay of 163Ho together with a first limit on ν mass.

The assessment of neutrino absolute mass scale is still a crucial challenge in today particle physics and cosmology. Beta or electron capture spectrum end-point study is currently the only experimental method which can provide a model independent measurement of the absolute scale of neutrino mass. HOLMES is an experiment funded by the European Research Council to directly measure the neutrino mass. HOLMES will perform a calorimetric measurement of the energy released in the electron capture decay of the artificial isotope $^{163}$Ho. In a calorimetric measurement the energy released in the decay process is entirely contained into the detector, except for the fraction taken away by the neutrino. This approach eliminates both the issues related to the use of an external source and the systematic uncertainties arising from decays on excited final states. The most suitable detectors for this type of measurement are low temperature thermal detectors, where all the energy released into an absorber is converted into a temperature increase that can be measured by a sensitive thermometer directly coupled with the absorber. This measurement was originally proposed in 1982 by A. De Rujula and M. Lusignoli, but only in the last decade the technological progress in detectors development has allowed to design a sensitive experiment. HOLMES plans to deploy a large array of low temperature microcalorimeters with implanted $^{163}$Ho nuclei. In this contribution we outline the HOLMES project with its physics reach and technical challenges, along with its status and perspectives., This is a pre-print of an article published in Journal of Low Temperature Physics. The final authenticated version is available online at: https://doi.org/10.1007/s10909-018-2025-x

International audience; The assessment of the neutrino absolute mass scale is still a crucial challenge in today particle physics and cosmology. Beta or electron capture spectrum end-point study is currently the only experimental method which can provide a model independent measurement of the absolute scale of neutrino mass. HOLMES is an experiment to directly measure the neutrino mass by performing a calorimetric measurement of the energy released in the electron capture decay of the artificial isotope 163Ho. In a calorimetric measurement the energy released in the decay process is entirely contained into the detector, except for the fraction taken away by the neutrino. This approach eliminates both the issues related to the use of an external source and the systematic uncertainties arising from decays on excited final states. HOLMES will deploy a large array of low temperature microcalorimeters implanted with 163Ho nuclei. The achievable neutrino mass statistical sensitivity is expected in the eV range, thereby making HOLMES an important step forward in the direct neutrino mass measurement with a calorimetric approach as an alternative to spectrometry. HOLMES will also establish the potential of this approach to achieve a sub-eV sensitivity. HOLMES is designed to collect about 3 × 1013 decays with an instrumental energy resolution around 1 eV FWHM and a time resolution around 1 µs. To achieve this in three years of measuring time, HOLMES is going to deploy 16 sub-arrays of TES microcalorimeters. Each sub-array has 64 pixels ion implanted with 163Ho nuclei to give a pixel activity of 300 Bq per pixel. The TES arrays are read out using microwave multiplexed rf-SQUIDs in combination with a Software Designed Radio data acquisition system. The commissioning of the first implanted sub-array is scheduled for 2018 and it will provide first high statistics data about the EC decay of 163Ho together with a preliminary limit on the neutrino mass. In this contribution we outline the HOLMES project with its physics reach and technical challenges, along with its status and perspectives. In particular we will present the status of the HOLMES activities concerning the 163Ho isotope production by neutron irradiation and purification, the TES pixel design and optimization, the multiplexed array read-out characterization, the cryogenic set-up installation, and the setting up of the mass separation and ion implantation system for the isotope embedding in the TES absorbers.

HOLMES is an experiment aimed at directly measuring the neutrino mass through the calorimetric measurement of the 163Ho electron capture decay. The final goal of the project consists in providing a sensitivity on the neutrino mass below 2 eV; in addition, it will establish the potential of this approach to achieve a sub-eV sensitivity. The detectors performances play a crucial role in achieving the desired sensitivity. Indeed, for such an experiment, the following characteristics are required: short response time ( ∼ 1 μ s ) to solve pile-up events, great energy resolution ( ∼ 1 eV @ 2.8 keV) and compatibility to be multiplexed in large detector arrays ( ≳ 1000). HOLMES will deploy 1000 Transition Edge Sensors which will be readout with the microwave multiplexing technique. In this contribution we outline the experimental setup used in the characterization phase of the detectors.

Measuring the neutrino mass is one of the most compelling issues in particle physics. HOLMES is an experiment for a direct measurement of the neutrino mass. HOLMES will perform a precise measurement of the end point of the electron capture decay spectrum of $$^{163}\hbox {Ho}$$ in order to extract information on the neutrino mass with a sensitivity as low as 1 eV. HOLMES, in its final configuration, will deploy a 1000-pixel array of low-temperature microcalorimeters: each calorimeter is made of an absorber, where the Ho atoms will be implanted, coupled to a transition-edge sensor (TES) thermometer. The detectors will be operated at the working temperature of $$100\,\hbox { mK}$$ provided by a dilution refrigerator. In order to read out the 1000-detector array of HOLMES, a multiplexing system is necessary: the choice is to couple the transition-edge sensors to a multiplexed rf-SQUID. In this contribution we outline the progress made towards the final configuration of HOLMES regarding both the performances of the TES detectors and the characteristics of the multiplexing system.

HOLMES is a new experiment to directly measure the neutrino mass with a sensitivity as low as 0.4 eV. HOLMES will perform a calorimetric measurement of the energy released in the electron capture decay of 163 Ho. HOLMES will deploy a large array of low temperature microcalorimeters with implanted 163 Ho nuclei. HOLMES baseline detector is an array of 1000 microcalorimeters each with an implanted 163 Ho activity of about 300 Bq, an energy resolution FWHM of about 1 eV at the spectrum end-point ( Q ≈ 2.5 keV), and a time resolution of about 1 μs. Matching these performances requires a careful optimization of all components, from the microcalorimeters to the signal processing algorithms. We outline here the project technical challenges and the present status of the development.

International audience; The measurement of neutrino masses is still one of the most compelling issues in modern particle physics. HOLMES is an experiment that aims to measure the effective νe mass using a calorimetric approach. It will measure the spectrum end point of the electron capture (EC) decay of $^{163}$Ho. The very low Q-value (2.8 keV) of the decay and its half life (4570 y) are optimal to reach simultaneously a reasonable activity to have sufficient statistics in the end-point, reducing the pile-up probability and have a small quantity of $^{163}$Ho embedded in the detector not to alter significantly its heat capacity. Holmium will be implanted into a micro calorimeter made by a metallic absorber coupled to transition edge sensor (TES). Each detector will be implanted with around 300 Bq of holmium and the goal of the experiment is implanting ≈500 detectors (8x64 array of detectors) to reach an accuracy of the order of eV. In this contribution, we show the HOLMES experiment with its physics reach and technical challenges, along with its status and perspectives.