Search

As a new high-end bearing product, full ceramic ball bearings are favoured in a variety. However, there have been few studies on the lubrication of full ceramic ball bearings. The purpose of this study is to reveal the relationship between the vibration and temperature rise of full ceramic angular contact ball bearings and the lubricant viscosity, and to improve the service life of the bearings. In this study, the effects of lubricant viscosity on the vibration and temperature rise of silicon nitride full ceramic angular contact ball bearings under different axial loads and rotation speeds were tested. Herein, a mathematical model of oil lubrication suitable for full ceramic ball bearings is established and the relationship between the lubricant viscosity, lubricant film thickness, outer ring vibration and temperature rise of the bearing is analyzed. It was found that the vibration and temperature rise first decrease and then increase with the increase of lubricant viscosity. In this range, there is an optimal viscosity value to minimize the vibration and temperature rise of the full ceramic angular contact ball bearing. The contact surface wear of the full ceramic angular contact ball bearing varies greatly under different lubricant viscosities. There is no obvious wear on the contact surface under optimal viscosity, and the service life of the bearing is greatly improved. These results can play an important role in revealing the lubricant mechanism of full ceramic ball bearings and improving their service life under optimal lubrication.

In order to reveal the friction properties and improve the wear resistance of silicon nitride ceramic materials, a calculation model of static friction coefficient of silicon nitride ceramic is established. The influence law of contact surface roughness on friction coefficient under different contact load and friction speed is analyzed. The test and the results verification are carried out by using Friction Wear Testing Machine. Then the dry friction process of silicon nitride ceramic is simulated based on UDEC, and the wear failure form is analyzed. In the dry friction process of silicon nitride ceramics, the coefficient of friction is directly proportional to the contact surface roughness, inversely proportional to the contact load, and directly proportional to the friction speed. There is a critical value for the roughness of friction sub-contact surface. Silicon nitride ceramics can self-lubricate by friction when the contact surface roughness is less than this critical value. In the dry friction process, the oxidation of SiO2 has little effect on the friction. The wear surface of silicon nitride ceramics consists of shear failure units and tensile failure units, and their formation is related to the surface roughness. The results play an important role in revealing the frictional properties of engineering ceramics such as silicon nitride, as well as helpful to improve the wear resistance and service life of ceramic materials.