Search

This paper proposes a solid-state pulsed power modulator (PPM) with fast rising/falling time and high repetition rates to drive pockels cells. Since the proposed circuit is based on the modular structure using silicon carbide (SiC) metal–oxide silicon field-effect transistors (MOSFETs) for bypass devices as well as for main switches, it can achieve fast switching speed and high reliability. In addition, by a control scheme employing the voltage difference, the proposed circuit can accomplish a high repetition rate and short pulsewidth. Design and implementation of 1.8-kV PPMs with repetition rate of 1 MHz and rising/falling time below 6 ns are presented. Also, important issues for the practical use of the SiC-based PPM are discussed. Experimental results from the developed PPMs are shown to verify the proposed works. [ABSTRACT FROM AUTHOR]

This paper describes the circuit of a capacitor charger for a solid-state Marx modulator. A high-efficiency LCC resonant inverter is proposed for the simultaneous charging of many capacitors in parallel using a multistage transformer and rectifier. Using a high-voltage insulation cable, the charging loop, which represents the primary winding of transformer, is implemented to transfer the power from the resonant inverter to each stage. In addition to the simultaneous charging of separate capacitors, the advantages of the proposed circuit and structure include compact design and reliable insulation performance against high-voltage pulses. Based on the relevant approximation, the simplified analysis of an LCC resonant converter with a trapezoidal shape of resonant current is provided and a 50-kW high-voltage capacitor charger is designed for a 40-kV solid-state Marx modulator. The power stage, which consists of a transformer with four voltage-doubled rectifiers, is designed, and six power stages are configured for generating a pulse output of 40 kV. The detailed implementation of the multistage transformer and rectifier is presented in accordance with the design requirements of a high voltage modulator. Finally, the developed charger achieves 96% of the maximum efficiency and 0.96 of the maximum power factor. The experimental results verify that the proposed circuit and structure can be effectively used for a solid-state Marx modulator. [ABSTRACT FROM PUBLISHER]