Search

[Display omitted] • Ab initio studies on atomic and electronic structures of osmolyte glycine betaine (GB). • The solvent effects were studied using a hybrid explicit–implicit solvation model. • GB and its protonated form GBH bind water in a dramatically different way. • GB can bind with more water molecules than GBH due to variation of electron density. • Microsolvated structures are supported by modeling core-electron spectra. Glycine betaine (GB), a naturally occurring osmolyte, has many biological functions and is used in food supplements, pharmaceuticals, and animal feed. GB usually exists as a zwitterion in aqueous solutions. Due to the hygroscopic property of GB, protonated form of GB, GBH+ (noted as GBH) is often used. In order to understand the hydration structures of GB and GBH at the atomic and electronic-structure level, a combination of ab initio molecular dynamics simulations and electronic structure calculations based on density functional theory (DFT), single-excitation configuration interaction method, and coupled-cluster ansatz was utilized. A hybrid explicit–implicit solvation model was used to elucidate solvent effects. Within the hybrid scheme, microsolvated structures of GB and GBH with up to 100 water molecules were obtained, showing that water molecules bind to GB and GBH in a dramatically different manner. By calculating the molecular electron-density distributions at PBE0-D4/def2-TZVP level, it shows that the variation of electron density for GB is more significant than GBH, suggesting that GB can interact with more water molecules than GBH. The interaction energies of GB–(H 2 O) n and GBH–(H 2 O) n systems (n = 1–6) at DLPNO-CCSD(T)/cc-pVQZ level highlight the difference from an energy point of view. Using the microsolvated structures of GB and GBH, the features of experimental K-edge spectra can be reproduced using the efficient PNO-ROCIS/B3LYP method, implying the reliability of the hybrid explicit–implicit solvation approach. The results suggest that complementary insights into the geometries and electronic structures of GB and GBH could be obtained through combined methods, which provides a methodological approach for understanding the hydration structures of zwitterionic and charged molecules. [ABSTRACT FROM AUTHOR]

Abstract: The geometries, electronic structures, polarizabilities and hyperpolarizabilities, and UV–vis spectra of organic dye sensitizers D5, DST and DSS were studied by using density functional theory (DFT) and time-dependent DFT. The calculated geometries indicate that the strong conjugated effects are formed in the dyes. The polarizabilities depend on the length of conjugate bridge of the dye. The features of UV–vis spectra were assigned to transitions according to the qualitative agreement between experiment and the TDDFT calculations. The absorption in visible region are all photoinduced electron transfer processes, the diphenylaniline group in D5 and the aniline group in DST and DSS are main chromophore that contributed to the sensitization, the interfacial electron transfer is due to an electron injection processes from excited dyes to semiconductor conduction band. The role of different conjugate bridge in geometries, electronic structures and spectra properties were analyzed in a comparative study of the dyes. [Copyright &y& Elsevier]

The development and synthesis of novel dye sensitizers are important for improving the power conversion efficiency of dye-sensitized solar cells (DSSCs) in terms of the role of dye sensitizers in photon to electricity energy conversion processes. How the different moieties tune the electronic structures and related properties is the fundamental issue in designing dye sensitizers. Here, the geometries, electronic structures, excitation properties, and free energy variations for electron injection (EI) and dye regeneration (DR) of porphyrin dye sensitizers SM315, GY50, FA and KS, containing bulky bis(2',4'-bis(hexyloxy)-[1,1'-biphenyl]-4- yl)amine, diarylamino group with two hexyl chains, quinolizinoacridine and triazatruxene as electron donors, respectively, were investigated. The Q bands absorption spectra of FA and KS exhibit a blue-shift relative to those of SM315 and GY50, resulting from weak conjugation effects. The transition configurations and molecular orbital analysis suggest that the electron donors in these dyes are effective chromophores for photon-induced EI in DSSCs. The torsion angle between the electron-donor and the conjugation-bridge has significant effects on electronic structures, excited states, charge transfer (CT) properties, and free energy variations for EI and DR. The transferred charges and CT distances demonstrate that quinolizinoacridine in FA is the most prominent electron donor moiety among these porphyrin dyes. [ABSTRACT FROM AUTHOR]

Alkaline-earth metallic dopant can improve the performance of anatase TiO2 in photocatalysis and solar cells. Aiming to understand doping mechanisms, the dopant formation energies, electronic structures, and optical properties for Be, Mg, Ca, Sr, and Ba doped anatase TiO2 are investigated by using density functional theory calculations with the HSE06 and PBE functionals. By combining our results with those of previous studies, the HSE06 functional provides a better description of electronic structures. The calculated formation energies indicate that the substitution of a lattice Ti with an AEM atom is energetically favorable under O-rich growth conditions. The electronic structures suggest that, AEM dopants shift the valence bands (VBs) to higher energy, and the dopant-state energies for the cases of Ca, Sr, and Ba are quite higher than Fermi levels, while the Be and Mg dopants result into the spin polarized gap states near the top of VBs. The components of VBs and dopant-states support that the AEM dopants are active in inter-band transitions with lower energy excitations. As to optical properties, Ca/Sr/Ba are more effective than Be/Mg to enhance absorbance in visible region, but the Be/Mg are superior to Ca/Sr/Ba for the absorbance improvement in near-IR region. [ABSTRACT FROM AUTHOR]

The electronic structures and excitation properties of dye sensitizers determine the photon-to-current conversion efficiency of dye sensitized solar cells (DSSCs). In order to understand the different performance of porphyrin dye sensitizers YD2 and YD2-o-C8 in DSSC, their geometries and electronic structures have been studied using density functional theory (DFT), and the electronic absorption properties have been investigated via time-dependent DFT (TDDFT) with polarizable continuum model for solvent effects. The geometrical parameters indicate that YD2 and YD2-o-C8 have similar conjugate length and charge transfer (CT) distance. According to the experimental spectra, the HSE06 functional in TDDFT is the most suitable functional for describing the Q and B absorption bands of porphyrins. The transition configurations and molecular orbital analysis suggest that the diarylamino groups are major chromophores for effective CT excitations (ECTE), and therefore act as electron donor in photon-induced electron injection in DSSCs. The analysis of excited states properties and the free energy changes for electron injection support that the better performance of YD2-o-C8 in DSSCs result from the more excited states with ECTE character and the larger absolute value of free energy change for electron injection. [ABSTRACT FROM AUTHOR]

To understand the role of the conjugate bridge in modifying the properties of organic dye sensitizers in solar cells, the computations of the geometries and electronic structures for 10 kinds of tetrahydroquinoline dyes were performed using density functional theory (DFT), and the electronic absorption and fluorescence properties were investigated via time dependent DFT. The population analysis, molecular orbital energies, radiative lifetimes, exciton binding energies (EBE), and light harvesting efficiencies (LHE), as well as the free energy changes of electron injection (ΔG inject) and dye regeneration (ΔGdyeregen) were also addressed. The correlation of charge populations and experimental open-circuit voltage (Voc) indicates that more charges populated in acceptor groups correspond to larger Voc. The elongating of conjugate bridge by thiophene units generates the larger oscillator strength, higher LHE, larger absolute value of ΔGinject, and longer relative radiative lifetime, but it induces the decreasing of EBE and ΔGdyeregen. So the extending of conjugate bridge with thiopene units in organic dye is an effective way to increase the harvest of solar light, and it is also favorable for electron injection due to their larger ΔGinject. While the inversely correlated relationship between EBE and LHE implies that the dyes with lower EBE produce more efficient light harvesting. [ABSTRACT FROM AUTHOR]

Phenyl C71 butyric acid methyl ester (PC71BM) has been adopted as electron acceptor materials in bulk heterojunction solar cells with relatively higher power conversion efficiency. The understanding of the mechanism and performance for the devices based upon PC71BM requires the information of conformations, electronic structures, optical properties, and so forth. Here, the geometries, IR and Raman, electronic structures, polarizabilities, and hyperpolarizabilities of PC71BM isomers are studied by using density functional theory (DFT); the absorption and excitation properties are investigated via time-dependent DFT with B3LYP, PBE0, and CAM-B3LYP functionals. The calculated results show that [6,6]PC71BM is more stable than [5,6]PC71BM due to the lower total energy. The vibrational modes of the isomers at IR and Raman peaks are quite similar. As to absorption properties, CAM-B3LYP functional is the suitable functional for describing the excitations of PC71BM because the calculated results with CAM-B3LYP functional agree well with that of the experiment. The analysis of transition configurations and molecular orbitals demonstrated that the transitions at the absorption maxima in UV/Vis region are localized π-π * transitions in fullerenes cages. Furthermore, the larger isotropic polarizability of PC71BM indicates that the response of PC71BM to applied external electric field is stronger than that of PC61BM, and therefore resulting into better nonlinear optical properties. [ABSTRACT FROM AUTHOR]

Confinement of electrons can occur in metal islands or in continuous films grown heteroepitaxially upon a substrate of a different metal or on a metallic alloy. Associated quantum size effects (QSE) can produce a significant height-dependence of the surface free energy for nanoscale thicknesses of up to 10-20 layers. This may suffice to induce height selection during film growth. Scanning STM analysis has revealed remarkable flat-topped or mesa-like island and film morphologies in various systems. We discuss in detail observations of QSE and associated film growth behavior for Pb/Cu(111), Ag/Fe(100), and Cu/fcc-Fe/Cu(100) [A/B or A/B/A], and for Ag/NiAl(110) with brief comments offered for Fe/Cu3Au(001) [A/BC binary alloys]. We also describe these issues for Ag/5-fold i-Al-Pd-Mn and Bi/5-fold i-Al-Cu-Fe [A/BCD ternary icosohedral quasicrystals]. Electronic structure theory analysis, either at the level of simple free electron gas models or more sophisticated Density Functional Theory calculations, can provide insight into the QSE-mediated thermodynamic driving force underlying height selection. [ABSTRACT FROM AUTHOR]