17 results on '"Simoes, Marcelo"'
Search Results
2. Experimental evaluation of active filtering in a single-phase high-frequency AC microgrid
- Author
-
Chakraborty, Sudipta and Simoes, Marcelo G.
- Subjects
Alternating current -- Observations ,Filtration -- Observations ,Filtration -- Methods ,Business ,Electronics ,Electronics and electrical industries - Published
- 2009
3. Performance evaluation of a novel hybrid multipulse rectifier for utility interface of power electronic converters
- Author
-
de Freitas, Luiz Carlos Gomes, Simoes, Marcelo Godoy, Canesin, Carlos Alberto, and de Freitas, Luiz Carlos
- Subjects
Electric current converters -- Design and construction ,Electric current rectifiers -- Design and construction ,Rectifier instruments -- Design and construction ,Light rail transit -- Technology application ,Electric current converter ,Technology application ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper presents an improved analysis of a novel Programmable Power-factor-corrected-Based Hybrid Muitipulse Power Rectifier (PFC-HMPR) for utility interface of power electronic converters. The proposed hybrid multipuise rectifier is composed of an ordinary three-phase six-pulse diode-bridge rectifier (Graetz bridge) with a parallel connection of single-phase switched converters in each three-phase rectifier leg. In this paper, the authors present a complete discussion about the controlled rectifiers' power contribution and also a complete analysis concerning the total harmonic distortion of current that can be achieved when the proposed converter operates as a conventional 12-pulse rectifier. The mathematical analysis presented in this paper corroborate, with detailed equations, the experimental results of two 6-kW prototypes implemented in a laboratory. Index Terms--AC motor drives, high power drives for trolley-bus systems, high power factor three-phase rectifiers, multipulse rectifiers, tractions applications, 12-pulse rectifiers.
- Published
- 2007
4. Three-port bidirectional converter for hybrid fuel cell systems
- Author
-
Duarte, Jorge L., Hendrix, Marcel, and Simoes, Marcelo Godoy
- Subjects
Fuel cells -- Usage ,Power converters -- Design and construction ,Hybrid integrated circuits -- Design and construction ,Business ,Electronics ,Electronics and electrical industries - Abstract
The implementation of a hybrid fuel cell/battery system is proposed to improve the slow transient response of a fuel cell stack. This system can be used for an autonomous device with quick load variations. A suitable three-port, galvanic isolated, bidirectional power converter is proposed to control the power flow. An energy management method for the proposed three-port circuit is analyzed and implemented. Measurements from a 500-W laboratory prototype are presented to demonstrate the validity of the approach. Index Terms--Battery, fuel cells.
- Published
- 2007
5. Programmable PFC based hybrid multipulse power rectifier for ultra clean power application
- Author
-
de Freitas, Luis Carlos Gomes, Simoes, Marcelo G, Canesin, Carlos Alberto, and de Freitas, Luiz Carlos
- Subjects
Power electronics -- Research ,Electric current rectifiers -- Research ,Rectifier instruments -- Research ,Business ,Electronics ,Electronics and electrical industries - Abstract
A novel hybrid three-phase rectifier is proposed. It is capable to achieve high input power factor (PF) and low total harmonic input currents distortion (TH[D.sub.I]. The proposed hybrid high power rectifier is composed by a standard three-phase six-pulse diode rectifier (Graetz bridge) with a parallel connection of single-phase Sepic rectifiers in each three-phase rectifier leg. Such topology results in a structure capable of programming the input current waveform and providing conditions for obtaining high input power factor and low harmonic current distortion. In order to validate the proposed hybrid rectifier, this work describes its principles, with detailed operation, simulation, experimental results, and discussions on power rating of the required Sepic converters as related to the desired total harmonic current distortion. It is demonstrated that only a fraction of the output power is processed through the Sepic converters, making the proposed solution economically viable for very high power installations, with fast investment payback. Moreover, retrofitting to existing installations is also feasible since the parallel path can be easily controlled by integration with the existing dc-link. A prototype has been implemented in the laboratory and it was fully demonstrated to both operate with excellent performance and be feasibly implemented in higher power applications.
- Published
- 2006
6. ABET 2000 challenges in curricular compression: fluids and circuits--a pilot 2 + 1 + 1 approach
- Author
-
Skokan, Catherine K., Simoes, Marcelo G., Delplanque, Jean-Pierre, and Gosink, Joan
- Subjects
Science -- Study and teaching ,Engineering -- Study and teaching ,Fluids ,Electric circuits ,Business ,Education ,Electronics ,Electronics and electrical industries - Abstract
In response to a call from the National Science Foundation (NSF) for curriculum reform and elimination of legacy materials in engineering curricula, the faculty at the Colorado School of Mines, Golden, has developed and offered a combined set of course modules in fluids and circuits. These modules consist of a two-credit interdisciplinary course in fundamentals, followed by two one-credit modules focusing on applications in fluids and in circuits, respectively. The course set reduces the overall number of credits from six (three in each of the standard fluids and circuits classes) to four through the 2 + 1 + 1 format. The fundamentals course, consisting of two credits, is based on conservation and accounting principles for the concepts of mass, momentum, energy, and charge. Two applications modules, each of one credit, develop these ideas in the respective disciplines. During the study, four challenges to implementation were uncovered: faculty and administrative buy-in, textbook selection, logistics, and stakeholders' acceptance. Index Terms--Accreditation, Accreditation Board for Engineering & Technology (ABET), circuits, curriculum, fluids, reform.
- Published
- 2005
7. Sensitivity analysis of the modeling parameters used in simulation of proton exchange membrane fuel cells
- Author
-
Correa, Jeferson M., Farret, Felix A., Popov, Vladimir A., and Simoes, Marcelo G.
- Subjects
Fuel cells -- Research ,Business ,Electronics ,Electronics and electrical industries - Abstract
The simulation of proton-exchange membrane fuel cells (PEMFC) may work as a powerful tool in the development and widespread testing of alternative energy sources. In order to obtain an adequate PEMFC model, (which could be used in the analysis of FC generation systems), it is necessary to define the values for a specific group of modeling parameters. The simulation results are strongly affected by the choice of such modeling parameters. Multiparametric sensitivity analysis is a tool that can be used to define the relative importance of the factors related to the model, because it encompasses the entire parameter space. This paper presents a sensitivity investigation of PEMFC electrochemical models, and aims to determine the relative importance of each parameter on the model results. Index Terms--Fuel cells, modeling and simulation, sensitivity analysis.
- Published
- 2005
8. Neural optimal control of PEM fuel cells with parametric CMAC networks
- Author
-
Almeida, Paulo E.M. and Simoes, Marcelo Godoy
- Subjects
Control systems -- Research ,Fuel cells -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper demonstrates an application of the parametric cerebellar model articulation controller (P-CMAC) network--a neural structure derived from Albus' CMAC algorithm and Takagi-Sugeno-Kang parametric fuzzy inference systems. It resembles the original CMAC proposed by Albus in the sense that it is a local network, i.e., for a given input vector, only a few of the networks neurons will be active and will effectively contribute to the corresponding network output. The internal mapping structure is built in such a way that it implements, for each CMAC memory location, one linear parametric equation of the network input strengths. First, a new approach to design neural optimal control (NOC) systems is proposed. Gradient-descent techniques are still used here to adjust network weights, but this approach has many differences when compared to classical error backpropagation algorithm. Then, P-CMAC is used to control the output voltage of a proton exchange membrane fuel cell (PEM-FC), by means of NOC. The proposed control system allows the definition of an arbitrary performance/cost criterion to be maximized/minimized, resulting in an approximated optimal control strategy. Practical results of PEM-FC voltage behavior at different load conditions are shown, to demonstrate the effectiveness of the NOC algorithm. Index Terms--Control systems, fuel cells (FCs), neural networks, optimal control.
- Published
- 2005
9. An electrochemical-based fuel-cell model suitable for electrical engineering automation approach
- Author
-
Correa, Jeferson M., Farret, Felix A., Canha, Luciane N., and Simoes, Marcelo G.
- Subjects
Fuel cells -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper presents a dynamic electrochemical model for representation, simulation, and evaluation of performance of small size generation systems emphasizing particularly proton exchange membrane fuel-cell (PEMFC) stacks. The results of the model are used to predict the output voltage, efficiency, and power of FCs as a function of the actual load current and of the constructive and operational parameters of the cells. Partial and total load insertion and rejection tests were accomplished to evaluate the dynamic response of the studied models. The results guarantee a better analytical performance of these models with respect to former ones with a consequent reduction in time and costs of projects using FCs as the primary source of energy. Additionally, this electrochemical model was tested for the SR-12 Modular PEM Generator, a stack rated at 500 W, manufactured by Avista Laboratories, for the Ballard Mark V FC and for the BCS 500-W stack. Index Terms--Automation, control, fuel cells (FCs), modeling and simulation.
- Published
- 2004
10. Parametric CMAC networks: fundamentals and applications of a fast convergence neural structure
- Author
-
Almeida, Paulo E.M. and Simoes, Marcelo Godoy
- Subjects
Neural networks -- Analysis ,Mobile communication systems -- Research ,Wireless communication systems -- Research ,Information networks -- Evaluation ,Information networks -- Design and construction ,Computer networks -- Evaluation ,Computer networks -- Design and construction ,Neural network ,Wireless technology ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper shows fundamentals and applications of the parametric cerebellar model arithmetic computer (P-CMAC) network: a neural structure derived from the Albus CMAC algorithm and Takagi-Sugeno--Kang parametric fuzzy inference systems. It resembles the original CMAC proposed by Albus in the sense that it is a local network, (i.e., for a given input vector, only a few of the networks nodes--or neurons--will be active and will effectively contribute to the corresponding network output). The internal mapping structure is built in such a way that it implements, for each CMAC memory location, one linear parametric equation of the network input strengths. This mapping ran be corresponded to a hidden layer in a multilayer perceptron (MLP) structure. The output of the active equations are then weighted and averaged to generate the actual outputs to the network. A practical comparison between the proposed network and other structures is, thus, accomplished. P-CMAC, MLP, and CMAC networks are applied to approximate a nonlinear function. Results show advantages of the proposed algorithm based on the computational efforts needed by each network to perform nonlinear function approximation. Also, P-CMAC is used to solve a practical problem at mobile telephony, approximating an RF mapping at a given region to help operational people while maintaining service quality. Index Terms--Cerebellar model arithmetic computers (CMACs), communication systems, mobile communication, neural networks.
- Published
- 2003
11. Simulation of fuel-cell stacks using a computer-controlled power rectifier with the purposes of actual high-power injection applications
- Author
-
Correa, Jeferson M., Farret, Felix A., Gomes, Jonas R., and Simoes, Marcelo Godoy
- Subjects
Fuel cells -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper presents the guidelines for simulation of fuel-cell (FC) stacks by using a computer-controlled high-power converter, which drives actual electric loads, or injects power to the grid. The FC output static and dynamic characteristics are closely reproduced in such a way the actual loads are seamlessly driven as if they were supplied by the simulated FC. The simulator characteristics include the membrane temperature and humidity, efficiency, flow of the reactants, cooling air fan and water pumps, the actual air environmental temperature and humidity, and the regimen of operation of the actual electrical load. Any type of FC of ordinary size can be simulated without having to use hydrogen with improved safety, variety of tests, flexibility, and demo facilities. Those features allied to the low cost of this FC simulator contribute for market analysis and life-cycle studies of a site installation. Index Terms--Alternative energy, computer control, fuel cells (FCs), interconnection, modeling, rectifiers, simulation.
- Published
- 2003
12. A comprehensive review for industrial applicability of artificial neural networks
- Author
-
Meireles, Magali R.G., Almeida, Paulo E.M., and Simoes, Marcelo Godoy
- Subjects
Neural networks -- Research ,Neural network ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper presents a comprehensive review of the industrial applications of artificial neural networks (ANNs), in the last 12 years. Common questions that arise to practitioners and control engineers while deciding how to use NNs for specific industrial tasks are answered. Workable issues regarding implementation details, training and performance evaluation of such algorithms are also discussed, based on a judiciously chronological organization of topologies and training methods effectively used in the past years. The most popular ANN topologies and training methods are listed and briefly discussed, as a reference to the application engineer. Finally, ANN industrial applications are grouped and tabulated by their main functions and what they actually performed on the referenced papers. The authors prepared this paper bearing in mind that an organized and normalized review would be suitable to help industrial managing and operational personnel decide which kind of ANN topology and training method would be adequate for their specific problems. Index Terms--Architecture, industrial control, neural network (NN) applications, training.
- Published
- 2003
13. A high-torque low-speed multiphase brushless machine--a perspective application for electric vehicles
- Author
-
Simoes, Marcelo Godoy and Vieira, Petronio, Jr.
- Subjects
Brushless electric motors -- Design and construction ,Digital signal processors -- Usage ,Electric motors -- Models ,Digital signal processor ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper presents the design, analysis, simulation, and modeling of a high-torque low-speed multiphase permanent-magnet brushless machine. The machine fits an in-wheel motor arrangement to be used for electric vehicle applications. This paper presents issues regarding the high-level modeling comprised of a transient model in conjunction with their corresponding experimental evaluation. Analysis was made to combine the modeling efforts with the expected behavior concerned with mutual inductance and armature reaction effects, so as to have realistic simulation results verified by the experimental setup. Comprehensive experimental results corroborate the work. Index Terms--Brushless machines, digital signal processors, electric machines, modeling, motor drives.
- Published
- 2002
14. Neural-network-based prediction of mooring forces in floating production storage and offloading systems
- Author
-
Simoes, Marcelo Godoy, Tiquilloca, Jhonny Leonidas Merma, and Morishita, Helio Mitio
- Subjects
Neural networks -- Usage ,Deep-sea moorings -- Research ,Offshore structures -- Hydrodynamics ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
This paper describes the development of a neural-network-based prediction of mooring forces of a deep-sea oil exploitation production process. The evolvement of a neural network simulator for analysis of the dynamic behavior of a system consisting of a turret-floating production storage and offloading (FPSO) system and a shuttle ship in tandem configuration is described. The turret-FPSO is a vessel with a cylindrical anchoring system fixed to the sea bed my mooring lines and a shuttle ship is connected during the oil transference. This system has quite complex dynamics owing to interactions of the forces and moments due to current, wind, and waves. In general, the mathematical model that represents the dynamics of these connected floating units involves a set of nonlinear equations requiring several parameters difficult to be obtained. In order to deal with such complexities, a neural network has been devised to simulate an FPSO tandem system. This approach opens new horizons for maintenance of mooring lines, preventing commons of the ships. Index Terms--Neural networks, offshore simulation, oil exploitation.
- Published
- 2002
15. Design and performance evaluation of a fuzzy-logic-based variable-speed wind generation system
- Author
-
Simoes, Marcelo Godoy, Bose, Bimal K., and Spiegel, Ronald J.
- Subjects
Wind power -- Research ,Fuzzy systems -- Usage ,Power electronics -- Research ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
Artificial intelligence techniques, such as fuzzy logic, neural network, and genetic algorithm, are recently showing a lot of promise in the application of power electronic systems. The paper describes the control strategy development, design, and experimental performance evaluation of a fuzzy-logic-based variable-speed wind generation system that uses a cage-type induction generator and double-sided pulsewidth-modulated (PWM) converters. The system can feed a utility grid maintaining unity power factor at all conditions or can supply an autonomous load. The fuzzy-logic-based control of the system helps to optimize efficiency and enhance performance. A complete 3.5-kW generation system has been developed, designed, and thoroughly evaluated by laboratory tests, in order to validate the predicted performance improvements. The system gives excellent performance and can easily be translated to a larger size in the field. Index Terms - Fuzzy logic, intelligent control, power electronics, wind generation.
- Published
- 1997
16. Fuzzy logic based intelligent control of a variable speed cage machine wind generation system
- Author
-
Simoes, Marcelo Godoy, Bose, Bimal K., and Spiegel, Ronald J.
- Subjects
Wind power -- Equipment and supplies ,Air-turbines -- Equipment and supplies ,Programmable logic controllers -- Design and construction ,Business ,Electronics ,Electronics and electrical industries - Abstract
The paper describes a variable speed wind generation system where fuzzy logic principles are used for efficiency optimization and performance enhancement control. A squirrel cage induction generator feeds the power to a double-sided pulse width modulated converter system which pumps power to a utility grid or can supply to an autonomous system. The generation system has fuzzy logic control with vector control in the inner loops. A fuzzy controller tracks the generator speed with the wind velocity to extract the maximum power. A second fuzzy controller programs the machine flux for light load efficiency improvement, and a third fuzzy controller gives robust speed control against wind gust and turbine oscillatory torque. The complete control system has been developed, analyzed, and validated by simulation study. Performances have then been evaluated in detail.
- Published
- 1997
17. A Novel Competitive Learning Neural Network Based Acoustic Transmission System for Oil-Well Monitoring
- Author
-
Simoes, Marcelo Godoy, Furukawa, Celso Massatoshi, Mafra, Alexander T., and Adamowski, Julio Cezar
- Subjects
Oil wells -- Maintenance and repair ,Business ,Computers ,Electronics ,Electronics and electrical industries - Abstract
The optimal operation of an oil well requires the periodic measurement of temperature and pressure at the downhole. In this paper, acoustic waves are used to transmit data to the surface through the pipeline column of the well, making up a wireless transmission system. Binary data is transmitted in two frequencies, using frequency-shift keying modulation. Such transmission faces problems with noise, attenuation, and, at pipeline joints, multiple reflections and nonlinear distortion. Hence, conventional demodulation techniques do not work well in this case. The neural network presented here classifies signals received by the receiver to estimate transmitted data, using a linear-vector-quantization-based network, with the help of a preprocessing procedure that transforms time-domain incoming signals in three-dimensional images. The results have been successfully verified. The neural network estimation principles presented in this paper can be easily applied to other patterns and time-domain recognition applications. Index Terms--Acoustic data transmission, neural network, oil pipeline.
- Published
- 2000
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.