Search

In this study, we developed and validated a CE-TOF-MS method for the quantification of glyphosate (N-(phosphonomethyl)glycine) and its major degradation product aminomethylphosphonic acid (AMPA) in different samples including beer, media from toxicological analysis with Daphnia magna, and sorption experiments. Using a background electrolyte (BGE) of very low pH, where glyphosate is still negatively charged but many matrix components become neutral or protonated, a very high separation selectivity was reached. The presence of inorganic salts in the sample was advantageous with regard to preconcentration via transient isotachophoresis. The advantages of our new method are the following: no derivatization is needed, high separation selectivity and thus matrix tolerance, speed of analysis, limits of detection suitable for many applications in food and environmental science, negligible disturbance by metal chelation. LODs for glyphosate were < 5 μg/L for both aqueous and beer samples, the linear range in aqueous samples was 5-3000 μg/L, for beer samples 10-3000 μg/L. For AMPA, LODs were 3.3 and 30.6 μg/L, and the linear range 10-3000 μg/L and 50-3000 μg/L, for aqueous and beer samples, respectively. Recoveries in beer samples for glyphosate were 94.3-110.7% and for AMPA 80.2-100.4%. We analyzed 12 German and 2 Danish beer samples. Quantification of glyphosate and AMPA was possible using isotopically labeled standards without enrichment, purification, or dilution, only degassing and filtration were required for sample preparation. Finally, we demonstrate the applicability of the method for other strong acids, relevant in food and environmental sciences such as N-acetyl glyphosate, N-acetyl AMPA (present in some glyphosate resistant crop), trifluoroacetic acid, 2-methyl-4-chlorophenoxyacetic acid, glufosinate and its degradation product 3-(methylphosphinico)propionic acid, oxamic acid, and others.

Statically adsorbed or covalently coupled capillary coatings are of crucial importance in capillary electrophoresis-mass spectrometry for the separation of peptides and proteins. So far, published coating strategies and commercially available coated capillaries have a limited pH-stability so that the analysis at strongly acidic pH is limited, or harsh rinsing procedures for biological sample analysis cannot be applied. We here present a capillary coating based on Si-C linkages to N-acryloylamido ethoxyethanol (AAEE) with a new synthetic strategy including LiAlH 4 surface reaction. We optimized the coating method with emphasis on stability and reproducibility applying harsh rinsing procedures (strong acid, strong base and organic solvent), using the electroosmotic mobility and separation efficiency of tryptic peptides as performance measure. Complete synthesis is performed in less than 2 days for up to 8 capillaries in parallel of more than 16 m total length. Intra- and inter-batch reproducibility were determined regarding electroosmotic mobility, separation efficiency and migration time precision in CE-MS separations of tryptically digested bovine serum albumin. Coating stability towards rinsing with strong acid (1 mol/L HCl), organic solvent (acetonitrile) and strong base (1 mol/L NaOH) was investigated. Outstanding performance was found for single capillaries. However, inter-capillary reproducibility is discussed critically. The new coating was successfully applied for reproducible CE-MS separation of large proteins in diluted serum, medium-sized peptides and small and highly charged polyamines in fish egg extracts using a very acidic background electrolyte containing 0.75 mol/L acetic acid and 0.25 mol/L formic acid (pH 2.2).

Coatings are necessary to prevent protein and peptide adsorption to the capillary surface and obtain high intermediate precision. In this protocol, we first present our basic strategy to address peptide separation using three different coatings: one neutral and two cationic coatings, the latter largely differing in their induced electroosmotic mobility. In detail, we will describe how we apply the statically adsorbed coatings to obtain very high plate numbers and high repeatability.With some model examples, we clearly describe the scope of the method for the analysis of peptide samples: tryptic digests are addressed as well as small glycoproteins and glycopeptides largely differing in their effective electrophoretic mobility. We also show that the method is suitable for a fast screening of peptide samples despite a high matrix load comprising of up to 500 mmol/L sodium chloride. We demonstrate that this basic CE-MS method is rather independent of the polarity of the analytes with a very fast near-baseline separation of very hydrophobic Aβ peptides related to the onset of Alzheimer's disease. These examples will give an impression, which coating is most suitable for a specific analytical application.Special attention is paid to difficult aspects of the coating procedure and the CE-MS method, e.g., the potential of cross-contamination when changing the coatings.

In this study, we characterized unexpected side-products in a commercially synthesized peptide with the sequence RPRTRLHTHRNR. This so-called peptide D3 was selected by mirror phage display against low molecular weight amyloid-β-peptide (Aβ) associated with Alzheimer's disease. Capillary electrophoresis (CE) was the method of choice for structure analysis because the extreme hydrophilicity of the peptide did not allow reversed-phase liquid chromatography (RPLC) and hydrophilic interaction stationary phases (HILIC). CE-MS analysis, applying a strongly acidic background electrolyte and different statically adsorbed capillary coatings, provided fast and efficient analysis and revealed that D3 unexpectedly showed strong ion-pairing with sulfuric acid. Moreover, covalent O-sulfonation at one or two threonine residues was identified as a result of a side reaction during peptide synthesis, and deamidation was found at either the asparagine residue or at the C-terminus. In total, more than 10 different species with different m/z values were observed. Tandem-MS analysis with collision induced dissociation (CID) using a CE-quadrupole-time-of-flight (QTOF) setup predominantly resulted in sulfate losses and did not yield any further characteristic fragment ions at high collision energies. Therefore, direct infusion Fourier transform ion cyclotron resonance (FT-ICR) MS was employed to identify the covalent modification and discriminate O-sulfonation from possible O-phosphorylation by using an accurate mass analysis. Electron transfer dissociation (ETD) was used for the identification of the threonine O-sulfation sites. In this work, it is shown that the combination of CE-MS and FT-ICR-MS with ETD fragmentation was essential for the full characterization of this extremely basic peptide with labile modifications.

Two-dimensional electrophoretic separations are one of the most promising tools for the continuously growing needs of different bioanalytical fields such as proteomics and metabolomics. In this work we present the design and the implementation of a two-dimensional electrophoretic separation coupled to mass spectrometry. We started our work studying the sample transfer characteristics of different microfluidic interfaces compatible with capillary coupling for two-dimensional electrophoretic separations. These junctions are aimed at method decoupling and sample transfer in a modular two-dimensional electrophoretic separation system. In order to perform the characterization of the interfaces, we carried out capillary electrophoresis experiments and numerical simulations using three cationic compounds under different flow conditions. The comparison of the experimental and simulation results enables us to clearly define the desirable characteristics of interfaces in order to achieve method orthogonality with lossless sample transfer in a two-dimensional separation system. Finally, we present a glass microfluidic chip as interface for the implementation of a novel hybrid modular system for performing two-dimensional electrophoretic separations involving isotachophoresis and capillary electrophoresis. In this setup we include mass spectrometric and contactless capacitively coupled conductivity detection to monitor the separation process. We demonstrate the ability of the setup to be used as a flexible analysis tool by performing preconcentration, separation, detection and identification of four different human angiotensin peptides., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Capillary coatings are crucial for high-quality separation performance in capillary electrophoresis analysis of proteins or peptides as they prevent analyte adsorption at the capillary wall. These coating materials have to fulfill many requirements such as a good separation performance and ensuring a good repeatability. The number of commercially available coating materials is still limited, especially with regard to the charge density on the coating material and the induced electroosmotic flow (EOF) velocity. In this work, we compare the separation performance of the novel self-made cationic capillary coating OHNOON and two commercially available coating materials, the acrylamide based, neutral LN® and the cationic hexadimethrine bromide (Polybrene), using the same coating procedure for all three coating materials. The coatings are investigated regarding the separation efficiency, analyte resolution, coating stability, and migration time stability in tryptic peptide analysis. Good separation performance was confirmed for all three coating materials: all coatings provided high plate numbers of up to 400,000-500,000 and a repeatability of the EOF and the analyte migration times in the range of 1% relative standard deviation or below. Our results reveal a moderate EOF velocity for the novel OHNOON coating in comparison to the Polybrene coating. We present a detailed discussion of the impact of this reduced EOF velocity and the separation performance. The results presented here will help to define the necessary properties of coating materials to achieve the best compromise between speed of analysis and resolution for the respective application. We show that our novel OHNOON coating is especially valuable for the analysis of low mobility analytes and for samples with a broad range of analyte mobilities.